use the latest version of nvflash, 5.13
Printable View
use the latest version of nvflash, 5.13
I have a Leadtek 6200 and I can OC core/mem 600/700 with Leadtek 6600 bios.
My problem, when I use nvflash 5.13 anh flash this card with SparkleUltra bios. Everytime, boot in windows I receive notice - the power not connect this card :confused: and Riva show core/mem is 300/550.
I can't OC more a bit with this bios :( .
Please help me.
Thank for information.
sorry my English
My Leadtek 6600 flashed ok with Sprkle 6600 BIOS, what is the Ultra version ?Quote:
Originally Posted by iMAX
Regards
Andy
tnx for your tips, i managed to dump bios and i reaced 530/730 and my 03 scoor was 8k , bretty good, but i have now OCing problems, i but in rivatuner hihger clocks, it shows i have butted higer clocks, but in rivatuner monitoring are my clocks still sama.
sry for my english :p:
Hi, No problem with the English !Quote:
Originally Posted by sponge bob
I think you must be doing either of the following :-
a) altering the 2D clocks
b) Altering the 3d clocks in rivatuner but do not have force performance level on, so it only goes to the 3d higher clocks when 3dmark is run. This being the case if you leave rivatuner on during 3dmark then it should increase and then decrease again as you enter and leave.
Good luck !
Regards
Andy
WR 6200 3D05 WHQL - FM approved
http://ebola.club.fr/wr-3946.JPG
ORB Link
Ebola , great score :toast: congt.. :woot:Quote:
Originally Posted by Ebola
@Ebola : stop here now :D
Core ~ 700 Mhz -> it's very nice :toast:
@zakelwe : Ultra version is core/mem 500/700. Someone tell me it's good for ocing, but not for me :confused:
Nice score ebola ! :toast:
Shame the Ultra settings do not work for you iMax.
Regards
Andy
03 Overclock@535/735 8287 (y)
05 overclock 535/735: 3607 :o
my beast :banana: imho core oc sucks hard
btw andy i run 3d mark but clocks wont go higer, still the same clocks as my 2d :slapass: but low power 3d helped me little bit
my asus 6200's core=600:(
http://img1.picsplace.to/img1/2212/D.JPG
erm what is wrong with 600/762 ???
Quote:
Originally Posted by Ebola
my asus 6200's core=600:(
http://img1.picsplace.to/img1/2212/D.JPG
lol i barerly get 540 at my 6600
I got a Gigabyte PCI EX 6200. it mods to 8 pipelines perfectly.
so I took a old P4 Heatsink, and mounted that on it. and it was doing 615/730 at stock. just the P4 heatsink was all that was different.
while this was impressive for what the card was doing at stock, I knew it had alot more in it.
so I extracted the default bios, and modded it, for new clock speeds of 575/650, and enabled the Temp Sensor to work.
this was cool to see the temp sensor working.
finally, this card felt like it was turning into a card I could game with :)
well, good is never good enough for me, I had to go farther...
so I started messing with the driver first, and found that if you use the 6600 Driver, you get a nice boost in your 3dmark2003 score ;)
then I volt modded it, and quickly found the limits this card has...
anything above 1.54 volts, equals fuzzy dots on the screen, and quick freeze ups, even at low clock speeds.
this card just will not take anything more then 1.54 volts.
at 1.45 volts, the speed I used was 640 mhz, which worked great. but at 1.5 volts, the card quickly overheats, even with the huge P4 heatsink on there.
seems this card needs a waterblock :)
so no more then 640 on air for me... not yet atleast.
the Memory however, is abit of a mystery.
it's solid up to about 3.25 volts, then after that, it appears to be doing great...
but if you up the voltage past 3.3 volts, the memory just goes nuts.
I had it all the way to 3.53 volts, and the card was fine, just doesn't like anything more then 3.25 volts.
at 3.15 volts, I had 770 stable for benchmarks.
thats nice getting another 40 mhz with that volt mod, cause that alone, got me another 200 points on 3dmark2003, which showed me, the memory was really holding back my Core.
sooooo, so far, this cards pretty damn cool.
it was only $50 from neweggs refurbs, and at that price, I am beyond impressed and have had a ton of fun with this card.
only problem so far, is a strange one...
the 7189 driver sucks for this card.
about 20 seconds into 3dmark 2003, it will just "blink" then the speed is drastically lower, getting about 7000 frames total, when the airplane test finishs.
when the card works great with the 6693 driver, I get about 9700 frames by the end of that same test, cause it doesn't do that "Blink" with that driver.
that thing with 3dmark2003 and the 7189 drivers, is constant, once it blinks, you have to reboot, before the computer will start being any good again.
so the newest drivers from Nvidia, are totally unsuable for me, so my 3dmark2003 scores are really lacking at the moment :(
Kunaak, does your Gigabyte have the ISL6549 IC for voltages ?
Regards
Andy
I did 621/619 on my Leadtek 6200TD http://service.futuremark.com/compare?2k3=3758720 with score of 7117
and 628/629 with score of 7044 http://service.futuremark.com/compare?2k3=3758483
CPU is affecting the result ;)
Nope.Quote:
Originally Posted by zakelwe
ISL6534CR.
Hmmm, the Leadtek has ISL6534 and ISL6549 and when more than 1.55v is applied either blank screen or lock ups occur. At 1.5v+ if you go into 3d it locks up, at 1.55+ it locks up in 2D, I wondered if your card was showing the same problem because of the ISL components?Quote:
Originally Posted by Kunaak
Regards
Andy
Is a 6200 MSI a good card for overclocking?
Very nice oc m8 m cheers :=) Keep up da good work
look whos here :banana: next week im going to hit atleast 8,6k in 03 with my asus 6200 :clap: i have problems butting on my barton inbox but soon ill fix itQuote:
Originally Posted by neoman
now my asus 6200GE is full modded gpu and mem
i reaced 780 mhz 3v
but i cant OC my core, it seems that thermal thortling in action, but my temps are realy fine :confused: any help how can i get ride off that throtling, there were rivatuner tweaks but i cant find them :fact:
that's great spoge bob, maybe u can change with the Sparkle Ultra BIOS (to get more core oc'ing headroom)
anyway, what's ur mem? 4ns or 3.6ns?
and what ramsinks do u use on the mem modules?
I have an Sparkle 6200 agp and an 6600 agp in tests but the max I can get with stock cooling is 460/555 for 6200 and 525/585 for 6600. I can activate the extra pipelines for 6200. But I'm dissapointed about the overclocking. What can I do ?