Printable View
Cheers Susquehannock,
In the UK its pretty hard to get hold of these brands of ram.
I can get the G Skill extreme's for 205 pounds, the PQI turbos for 181 pounds and the PDP XBL's for 156 pounds. The XBL's are still really tempting, just hope I can get them to run 270 fsb at 2.9 to 3 volts.
Has anyone yet managed similar results with the xbls in dual channel mode.
Hesky
hesky ->
I'm in war for make a grouped order of best memory since 2 mouth !
I can have from Gskill Taiwan @ 245-250 € -> TCCD without certified
But they tell me that is good TCCD -> Maybe 300 MHz 2.5-3-3-5
He don't tell me if is GBLA, GBLB ... for me this name is MARKETING.
Gskill tell me that GBLE is now only for Newegg :(
For me Gskill is all the same except the GBLD, GBLD it's worst Samsung I thinks.
But 245-250 € ... is too mush, and I ask all XS.com, witch other memory can make this ?
Thanks :toast:
Hi computersmsa, thats cheaper than I can get, but its hard to get the g skill stuff cheap in the uk. Maybe if theres more interest in the group buy the price may go down.
Hesky
I'm running mine stable DC @ 270 2.5-3-3-7. Good stuff :)Quote:
Originally Posted by hesky
with 2x512 LE, 295 at 2.65V. Gskill said that only 1 out of 10 tccd 431 will past speed binning and labeled LE....
Quote:
Originally Posted by LFATB
i have the 512 kit and i can run 3.10v at 2-3-3-5 just fine. i havent tried this high of voltage with 3cas just 2cas and at high HTT like 270 plus... so far verry good memory. *crosses fingers*
peace perc,
Hi . Guys what are you thinking of Corsair 3200XLPT ????
Please look in the picrure , i guess that the PCB is BP. Thanks
New Corsair = BrainPower :)
hesky -> You can look the story of grouped order -> http://forum.bel-hardware.citywebz.c...t=128&start=60
I have good contact and price with Centon memory :)
Are the Patriot 1 GB TCCD Rams selling for $219.99 at Newegg?Quote:
Originally Posted by Perc
Here's the link?
http://www.newegg.com/app/ViewProduc...220-033&depa=0
Those be the good ones. :)Quote:
Originally Posted by Sgt_Strider
Interesting how that "BP" number is in a different location than my Gskill stix.Quote:
Originally Posted by shimo
These have the "BP" number in the very middle of the back of
the module between the chips.
Guess those silly heatspreaders are covering the ends so you can't tell us
which BrainPower PCB they are using ... 808 or 815, or maybe something else completely?
They are BP 815 (TwinX1024-3200XLPT v1.2 dual-channel) . They did 270 @ 2.5-3-3-6 1T on a Abit AV8- K8T800-PRO with a winnie:). Hope they will do the same on my DFI -NF3 with my 3400+(NC 0433). Merry cristhmas to all:)
Centon will make TCCD with BP 808A in near time :)
The best PCB ...
For Europa people, I make a grouped order of them in near time.
Centon have a protos, but not quantity yet :)
The new topic -> http://forum.bel-hardware.citywebz.c...opic.php?t=156 I think that will be a very good memory :D
++ Good end of year :)
Finally got my TCCD, OCZ PC3200 2-2-2 Rev 2. Working in my DFI 754 with a 3200+ claw. I have a big problem cause I just can't get it over 245mhz at 2.5-3-3-7 timings. When I boot with these settings and my mobo wants to detect my 2 s-ata hdd's it just stops, like it can't find them. Anyone familiar with this problem?
HDD SATA -> Port 3 & 4
Disable 1 & 2
:)
The Ram spreaders are quite useless indeed. I had a hunch my Patriot's were running hot so i decided to rip spreaders off and boy am i glad i did, there wasnt even 2 whole ram chips making full contact on one stick! very poor contact overall!
now time to see what they really can do! so far stable to 230FSB 2 2 2 7 1!
Yeah I figured it out, thanks for the help though :toast:Quote:
Originally Posted by computersmsa
I have another problem, my TCCD has a couple of errors in memtest at 265, sometimes hl2 also hangs up. Does burning in help or should I just RMA it and get the G.Skill?
S754 -> No problem with one stick, with two stick -> +- 265 MHz max ...
http://www.bel-hardware.be/a64moc_1.html
Look, it's the same with all TCCD :)
But even with 1 dimm I can't get 265 stable...
Sorry guys, but do the OCZ 4200EL use selected TCCD + BrainPower PCB? :confused:
Which chip & pcb use the OCZ 4000EL Rev2? They are like OCZ 3200 EL Rev2? ;)
Thanks a lot all ;).
Regards :toast: .
Nope ... don't think the OCZ 4200el will be BP/TCCD. You need to be looking
at these:
- OCZ pc3200 EL Platinum Revision 2 (mod# OCZ4001024ELDCPER2-K) = Brainpower 808
- OCZ pc3700 EL Dual Channel Platinum (mod# OCZ4661024ELDCPE-K) = Brainpower 808
Thanks :).
So the 3700 Use selcted TCCD + BP PCB? :confused:
hey thx for the heads up on the heat spreaders. after reading your post i went and took a look at my patriot xbl's and sure enough poor contact...Quote:
Originally Posted by Jethro
these patriots are realy decent memory for sure. these are the first memorys i can actualy run two dimms at high htt in my DFI 250ut board. used to have to take a stick out once past 250htt now im at 270 and stable with both stick installed... deff nice memory glad i got a pair.
later perc,
I cant relly figure out which BP PCB I got, this is the code: BP WLL E186014 and D6800H. Would be cool if someone knew.
whats the best way to take the heatspreaders off?
Yep, pretty sure they use hand selected chips that are known toQuote:
Originally Posted by Juspriss
OC well.
They are likely covered by the heatspreaders, but I think you need to look atQuote:
Originally Posted by NiCKE^
the ends of the PCB. As in this picture:
http://server3.uploadit.org/files/Su...tccd808815.jpg
Quote:
Originally Posted by Perc
Not at all surprised the heatspreaders were making poor contact. This is
more common that we'd like to think. Not only that, those adhesive pads
aren't "thermal pads" ... or are they?
Try freezing the stix first. (makes the adhesive brittle)Quote:
Originally Posted by MaRtIe
Then thread a piece of fishing line under the spreaders and pull. There are
other tricks and hopefully someone will post up.