Hi guys! I don't get it... is your GTX580s @ 1.025v or 1.125v?
Printable View
Hi guys! I don't get it... is your GTX580s @ 1.025v or 1.125v?
http://xmages.net/storage/10/1/0/d/8...b_86f84b98.jpg http://xmages.net/storage/10/1/0/d/8...b_5d4c5aea.jpg http://xmages.net/storage/10/1/0/d/8...b_92867468.jpg
http://xmages.net/storage/10/1/0/d/8...b_79b19884.jpg http://xmages.net/storage/10/1/0/d/8...b_72b64f90.jpg http://xmages.net/storage/10/1/0/d/8...b_8c34bd61.jpg
http://xmages.net/storage/10/1/0/d/8...b_6e8b9a3c.jpg
EK Water - best of the best :up:
Hi Alexxx, or did you dl this version of AB ( 1.225v) .
1.025 stock voltage. The overclocks you are seeing are being achieved with higher voltage.Quote:
Originally Posted by Punisher!
990/2310
http://www.shrani.si/f/V/De/vUWg00K/untitsled.jpg
37°C LOAD is to high for 1000MHz :down:
happy new year guys! :) nice clocks ^ watercooling setups ^ :toast:
just dropped by to leave an update.. idk where to start.. had several issues to overcome
- flow sorted after installing an eheim 1250 water pump between the gpus and cpu and another eheim 1250 between the rest of the water blocks and radiators
- added a second radiator to the loop - one is air cooled by a silent 360mm fan and the other is submerged in water - can sustain higher loads + lower temp now
- gpus were recapped for a 3rd and final time - perfectly balanced capacitance now - no whine from gpus nor psu - first recap produced xtreme whining from psu even @ 2x psus and had lost system stability
- stable system now
- i got areca 1231 raid card water cooled - the whole system is water cooled except psu
- the only issue i still have is tri-sli but for now am sticking to sli cause its going great
http://img819.imageshack.us/img819/51/sam0815.jpg
im playing nfs hot pursuit/metro/cod black ops @ 950/2500 sli @ absolute max 1080p settings
to run 1ghz i need more vgpu i was wondering if someone would be willing to share unlocked afterburner
i will respond to pms later tonight
here afterburnervoltunlock , tested on AB 2.10 beta 5Quote:
Originally Posted by NapalmV5
oh sb ^ nice!
merci.. it didnt work though but its okQuote:
Originally Posted by enkie
well guys after i pushed more vgpu i was playing nfs @ 1025core/2400 but metro just didnt want to cooperate so i tryed lower voltages and went as low as you see below 1.125vgpu :) the 3rd recap that i performed yesterday morning came thru at last this recap i planned from the beginning but to get here i took other routes but in the end its all worked out beautifully
heres how afterburner looks right after playing metro @ 1000/2350/1.125vgpu sli
http://img717.imageshack.us/img717/9712/54410233.png
Just 1.125V DAMN :eek:
thx, max on v1.15 vQuote:
Originally Posted by NapalmV5
http://img109.imageshack.us/img109/8117/9701250.jpg
5Ghz 1.35vBios
Vantage Run!Got More ocing on sandy and 580gtx to come!
[IMG]http://img9.imageshack.us/img9/2742/5ghz.png[/IMG]
Anyone knows the difference between the asus bios 70.10.12.00.01 and 70.10.17.00.01?
This is what I was able to pull from mine:
http://lh3.ggpht.com/_Ya7yaQ3RTts/TT...1%20P20013.jpg
Required 1.154v and had to push pcie to 120 for it be stable (if I go to 121 it won't recognize my HDDs :shrug:)
I hadn't test just one card yet.
Unlocked voltage i think!
Is there any news on NiBiTor 6? :confused:
BTW, one Vantage run for those who like pictures (like me :D ):
http://img513.imageshack.us/img513/6...hysxgt980x.jpg
5.2Ghz 1.42v in Bios test!
http://img6.imageshack.us/img6/9238/...mhz686261t.png
Uploaded with ImageShack.us
well guys this is the issue that ive been having with the 1.025vid tri-sli
erratic spiking temp on the 3rd 1.025vidder.. just 2d idle spikes 10c over the other two
had i known its this bad i wouldve rmaed but since its been modified warranty gone
what you guys think it is?? its behaving just like a poor contact.. poor contact between the heatspreader and chip??
all else has been exhausted im at wits end i got no other choice but to remove the heatspreader
this is after playing metro for a few minutes
http://img684.imageshack.us/img684/6419/27872199.png
Does anyone think my 920 @ 200 bclk turns into a bottleneck with my 580 @ 1015/2200 during Mark11? I'm curious because Vantage and Heaven scores seem pretty good but eleven seems
poor compared to a lot of scores I see here. Just looking for opinions...
When you push your gpu overclock too far, benchmark scores will start going down before you get crashing.Quote:
Originally Posted by Slyde
Good point, I'll back it off a bit and try some runs. ThanksQuote:
Originally Posted by dengyong
Looks like a poor contact. It spikes probably when the load is heavy.Quote:
Originally Posted by NapalmV5
I don't see any switches or jumper, but just to ask, can you disable PCI-E slots and run just 3rd card alone? That way full load will be on that one and it should overheat fast (watch for it, of course).
Or you can just squeeze it with your fingers (block over the GPU) and see if it gets better. ;)
It seems like from 950 to 1018, the scores scale upward until the card crashes. It just doesn't play well with Mark11 I think.Quote:
Originally Posted by dengyong
http://img513.imageshack.us/img513/7647/11test2.th.png
http://3dmark.com/3dm11/535815
Here is my result with 3D11 with 266.58 .
I got my ASUS GTX580 on 900/4400 with 1.163V in Afterburner and GPU-Z says 1.121 - 1.129V used, which one is leading for alteration in the bios or what should i enter in the bios?
1.163v.Quote:
Originally Posted by x4er0