@zoomee : not cpunb , but NB voltage . alter that by 0.1 and test .
bingo13 , hope you get back to us soon with a beta bios :D
Printable View
@zoomee : not cpunb , but NB voltage . alter that by 0.1 and test .
bingo13 , hope you get back to us soon with a beta bios :D
Just tried upping the NB by one notch, then by two notchs from 1.3 - same thing - BSOD :-(
zoomee: Did you try setting your RAM timings manually?
They may have made changes with Auto Mem timings....
Hey~ wonder if anyone else got weird temp reading from CPUID Hardware Monitor for C4F... :confused:
It shows TMPIN2 - 128C
I have it too.
I always use DOCP - so it automatically puts in most of the correct entries - apart from trc which I always have to change.
All the other memory settings are just way to complicated - other than the usual 9-9-9-24-41-2T and volt settings which seem to be set ok. :shrug:
I did a dry run yesterday just to make sure it was all working ok at stock settings - Prime ran for like 20 hours + - lol - seeing my CPU running at 41Degrees C under full load was hilarious (stock 3.x setting) - as I'm used to it hitting 60Degrees C @ 4Ghz/1.46v!
dissapointed now as no more overclocking for me until a new bios is out - its either 4Ghz or bust! :shakes:
Bingo13 is probably going to come in tomorrow and say : "End of next week!" . :rofl:
j/k :D
ftp://ftp.asus.com.tw/pub/ASUS/mb/so...-ASUS-1606.zip
1606 is out among others
08/24/10 build date.
Hope their is a beta for the M3NHT Deluxe Mobo. I cannot change any CPU voltage settings or anything on my 1055T. I also get a 0X101 BSOD as well random freezing while playing games. Never had this with my 940BE, hopefully the issues will be resolved soon please Asus.
No point in releasing a new Ch4F bios if there are known critical bugs in it, right?
I for one rather wait for a proper release - still beta though ;)
If i get really bored/inpatient i could try to import newer agesa & updated roms myself into 1005, but naaah....
my gskill flare can not run on ASUS M4A87TD/USB3 , but it can run when i press the memoryOK switch. Should i update the official BIOS to beta BIOS?
BIOS isn't beta as ASUS made it official (even though some don't like it) and overclocking (at least with a 965 and a 1055T) is more stable, as for real critical bugs (like system not booting at all) I'm sure people will complaint ;)
Anyway, latest new BIOS are:
ASUS M4A87TD EVO 1005
ASUS M4A89TD Pro USB3 1006
ASUS M4A87TD USB3 1005
ASUS M4A87TD 1005
ASUS M4A89GTD Pro USB3 1606
Call them whatever you want or wait a couple of days for them to appear on the official motherboard downloads page :P
The BIOS are under ftp://ftp.asus.com.tw/pub/ASUS/mb/ if not already mirrored to ftp://ftp.asus.com/pub/ASUS/mb/
I wasn't refearing to 1005 as a beta, but the upcoming one we all wait for bingo13 to post here.
Even though Asus also post beta bioses on the support/download site sometimes, and make them official (see 0701 & 0707) ;)
As for the critical bug:
If they aren't done with all features 1005 may be a transition BIOS, if there's a new BIOS in 7-14 days you might as well skip it, if you have a X6 you will probably be more tempted to try it
Well since there has been no news lately on the M3N series boards I guess mine is garbage then. Too bad it has been a good Mobo, guess I will have to buy an AM3 board what do you guys recommend. 980A any better since I have TRI SLI 260's
Just saw 1606 bios for M4A89GTD PRO USB3 on the asus ftp, what's new?
It can't be as bad as 1605 thats for sure!!!
Thanks Asus - :up:
Priming now on 1606 as I type this!
Seems more stable and reliable than the last one and for the first time EVER - this bios has correctly picked up ALL my RAM settings (including correct trc)- yay :)
PC Probe reported various jumps in Vcore on 1605 - whereas on this one it seems more stable like the older BIOS's :)
Also noted that the FSB stays more around the 200Mhz mark instead of jumping slightly.
So far tis all good :) - Will report back if I can run 24hours prime stable again :)
:up::up::up::clap::up::up::up:
Any M3N-HT love? its been like 3 months :(