Post your C3 Test Results! (new title)

Printable View

Show 100 post(s) from this thread on one page

01-09-2010, 12:28 AM
izallica

1.9v
01-09-2010, 02:27 AM
Lastviking

Quote:

Originally Posted by crazydiamond

ive noticed a lot of people having a hard time getting 4ghz stable are on am2 boards. what is your vdimm?

anyone have good am2 & am3 boards w/ a good c3 that they could test with? when i get a chance i will throw my c3 in my foxconn a7da-s and see if there is any change in oc's

0942FPMW Grinder and mine did about same...i used AM2 + DDR2, and he did use AM3+ DDR3 and the clocks was about the same..the diffrens was more about luck.
01-09-2010, 06:34 AM
FlanK3r

Quote:

Originally Posted by Lastviking

0942FPMW Grinder and mine did about same...i used AM2 + DDR2, and he did use AM3+ DDR3 and the clocks was about the same..the diffrens was more about luck.

maybe its not only about luck, some boards are better. I think +- 30MHz stable up its diference between AM2+ and AM3. And 30MHz is for me too much :)
01-09-2010, 08:02 AM
Lastviking

Quote:

Originally Posted by FlanK3r

maybe its not only about luck, some boards are better. I think +- 30MHz stable up its diference between AM2+ and AM3. And 30MHz is for me too much :)

30mhz can be made of higher real vcore or something on the another board...but you never know :)
01-09-2010, 11:40 AM
possessed

Quote:

Originally Posted by crazydiamond

ive noticed a lot of people having a hard time getting 4ghz stable are on am2 boards. what is your vdimm?

anyone have good am2 & am3 boards w/ a good c3 that they could test with? when i get a chance i will throw my c3 in my foxconn a7da-s and see if there is any change in oc's

check mine a few posts back, it's 4GHz, nd and htt at 2.6GHz, on windows7 64bit prime95 64 bit stable on am2+ board with sb600
01-09-2010, 01:50 PM
NCspecV81

http://www.overclock.net/gallery/dat...50_666151T.PNG
01-09-2010, 03:47 PM
equinox1

put this 965 through the ringer last night. all on chilled water.
http://i31.photobucket.com/albums/c3...i/15140spi.jpg
http://i31.photobucket.com/albums/c3...wprime1024.jpg
http://i31.photobucket.com/albums/c3...7906wprime.jpg
http://i31.photobucket.com/albums/c3...l/19225cin.jpg
next up some 3dmark
01-09-2010, 04:47 PM
Lastviking

Quote:

Originally Posted by equinox1

put this 965 through the ringer last night. all on chilled water.

next up some 3dmark

Nice one... what week is that one?
01-10-2010, 12:34 AM
Chicco85

This is my poor little Phenom II X2 555 BE. :D

First of all, a quad:

http://forum.nexthardware.com/galler...dcore_3200.JPG

Second, a bit of overclock at default vcore:

http://forum.nexthardware.com/galler..._3800_vdef.JPG

On air. ;)
01-10-2010, 03:58 AM
FlanK3r

on AIR qucik with default Vcore :)
http://img97.imageshack.us/img97/572...95mhz2870m.png
01-10-2010, 07:35 AM
equinox1

Quote:

Originally Posted by Lastviking

Nice one... what week is that one?

seems mine is a bit of a uncommon one. cacac ac 0939epmw
01-10-2010, 08:09 AM
theoldtimer

Nice results equinox1.:up: What is the CPU temp on the lcd poster during 3d06 (CPU tests) and Cinebench 64-bit?
01-11-2010, 05:38 AM
equinox1

Quote:

Originally Posted by theoldtimer

Nice results equinox1.:up: What is the CPU temp on the lcd poster during 3d06 (CPU tests) and Cinebench 64-bit?

stays at 0c to -2c under load, ac unit wont take it any lower under full load runs.
01-13-2010, 01:36 AM
Daveburt714

Ok Folks...

After 2 months of tuning and tweaking with decent water and cheapo Ram I'm
pretty sure I've found my best 24/7 clocks at voltages I feel comfortable with!

I haven't done extensive Prime on it yet, but I'm pretty sure it will handle it.. :p:

I ran a bunch of benchies at these clocks and tried to compact it into a tight SS:
(BTW: this is a FULL Win7 boot with all services running, including 3 heavy duty Side Bar gadgets.)

http://i30.photobucket.com/albums/c3...table-Cram.png

Most of my settings can be seen in the shot. IMC is @ 1.3v, I tried my best to get it stable @ <1.275 but that seemed to be a limiting factor. 1.3v on the IMC works... :D

I'm REALLY happy with this for my cooling solution!
I'll prime it for an hour or so tommorow, but I'm pretty sure it's stable.
After all those benchies it probably would have failed if it was going too... :D

C3 chips absolutely ROCK! If your in the market for a new Phenom X4 make sure the last number in the product code is an "M" and not an "I" (M=C3)...
01-13-2010, 04:12 AM
I.nfraR.ed

Hi guys,

As I see, many people here have 0944APMW which is considered as overall good, right? I have 0945DPAW and seems that it's not quite so good, I can't hit 4.2 for 24/7 Prime stable in any means.
There's a chance I can find 0944APMW, does it worth buying? I should mention that probably will get another one (with different batch) when there's new delivery in Bulgaria.
01-13-2010, 09:50 AM
BadNizze

Hi all!
Been testing a new Phenom 955 today, 0949EPMW and initial findings are good!
3,80Ghz @ 1,376v (Stock)
4,00Ghz @ 1,44v
4,06Ghz @ 1,47v

Testing NB now 2,80Ghz @ 1,35v will post screens when I put both together!
01-13-2010, 11:28 AM
crazydiamond

Quote:

Originally Posted by I.nfraR.ed

Hi guys,

As I see, many people here have 0944APMW which is considered as overall good, right? I have 0945DPAW and seems that it's not quite so good, I can't hit 4.2 for 24/7 Prime stable in any means.
There's a chance I can find 0944APMW, does it worth buying? I should mention that probably will get another one (with different batch) when there's new delivery in Bulgaria.

i dont think its worth cchanging chips, it seems most of the water guys are settling around 4150mhz for 24/7
01-13-2010, 01:31 PM
I.nfraR.ed

I don't like the voltage it requires for that frequency - 1.57V.
Currently I'm testing the IMC.

2900MHz - 1.275V
3000MHz - 1.375V
3055MHz - 1.45V (max with this board from BIOS)
3068MHz - 1.55V (max from AOD) It doesn't scale up at all anymore, so this is the max for benches in normal ambient temp, maybe more with cold air
Pretty happy with that, it seems to be a good IMC.

I'm testing it with Prime Blend, is it ok?

PS: When I push the other things more (CPU, RAM) I will need some bump in the CPU-NB voltage, but 2900 @ 1.3 - 1.35 should be fine :)
01-13-2010, 01:59 PM
Zeus

Yeah, that is a very good CPU-NB!
01-13-2010, 02:47 PM
I.nfraR.ed

Ok, I'm running Prime atm. Voltages are:

CPU: 1.5625V with drop to 1.54 load
CPU-NB: 1.2875V - had to up it, cause of my ram frequency
RAM: 1.88V
NB: 1.36V

Temps:
Ambient: not sure (i have no thermometer, but it should be 20+)
max CPU: 43
max cores: 49

Not bad at all, but I gained only 100MHz for 24/7, compared to my unlocked 550.

http://img199.imageshack.us/img199/4748/primeblend.png

Batch: 0945DPAW

Everest from yesterday

http://img22.imageshack.us/img22/1714/cachememvw.png
01-13-2010, 04:20 PM
NCspecV81

love fresh temperatures!

http://www.overclock.net/gallery/dat...psphenomII.PNG
01-13-2010, 05:34 PM
Mavhenz

re

If I would like to get to 4 ghz on all core OC.
Watercooled

Would the phenom II 965 125w could be a good bet? (matched with good memory!)
01-13-2010, 05:39 PM
crazydiamond

Quote:

Originally Posted by Mavhenz

If I would like to get to 4 ghz on all core OC.
Watercooled

Would the phenom II 965 125w could be a good bet? (matched with good memory!)

:yepp:
01-13-2010, 05:46 PM
Mavhenz

re

Tempting...
01-13-2010, 06:03 PM
crazydiamond

maybe this will help you decide :p:

some of my w7 64bit air results:

http://i70.photobucket.com/albums/i8...2700-30min.jpg

http://i70.photobucket.com/albums/i8...minprimeC3.jpg

Show 100 post(s) from this thread on one page