2900 Pro Owners Thread

Printable View

Show 100 post(s) from this thread on one page

10-20-2007, 05:23 PM
NickS

Try RivaTuner.
10-20-2007, 05:35 PM
WrigleyVillain

Quote:

Originally Posted by _g0

This card even beats out my Core 2 Duo for the price/performance crown! $350 for the performance of ~$600 card, now that's a deal! :clap:

Does anyone recommend using ATI Tray Tools?

Thanks to all for all the info!

Welcome and glad to see another 1GB owner here :D Agreed on the price/performance crown and as for ATT overclocking and monitoring are not supported as yet, which is really too bad, someone needs to score Ray Adams an R600 card.

As for your temps I'm no expert here but experience and common sense tell me you're fine unless it's consistently over like 85. This thing was engineered to not hit 100% fan speed until its at 105C. And You may live in SoCal but Im in Chicago in sub zero temps w a gf who likes the room at 80F :p:
10-20-2007, 11:29 PM
_g0

Quote:

Originally Posted by WrigleyVillain

As for your temps I'm no expert here but experience and common sense tell me you're fine unless it's consistently over like 85. This thing was engineered to not hit 100% fan speed until its at 105C. And You may live in SoCal but Im in Chicago in sub zero temps w a gf who likes the room at 80F :p:

I think now under load is is consistently hitting around 90. Also, I had a hard lockup in FarCry last night, so I guess I'll scale back the OC a bit. Have you HEARD this thing at 100%? The neighbors across the street complain when that happens!!!
10-21-2007, 12:59 AM
ruisu

I bet it's your memory that crashed FarCry. 999 seems a bit extreme (for my card at least).

You set the speed to 100%? Lol...I put it at 50% out of curiosity, man I immediately set it back to normal. That thing sounds like a jet engine!
10-21-2007, 01:59 AM
roger_h99.nor

1 Attachment(s)

Ram and overheating.

1. When disassembly the stock heatsink, I discovered that only half of the ramchips made proper contact with the thermal pads on the heatsink. (It's possible to see this because of thermal pads have a slight pattern, when proper contact is made this pattern disappear.

2. After flashing a PRO to XT, I noticed MVDDC was raised to 2.20V. I found this to be a lot higher than than nessesary. Card can bench at 999 with only 1.875 (may be even lower than this!)

Thus, try to lower MVDDC, You will have a cooler card.
10-21-2007, 07:01 AM
coolice

just got my card yesterday and i tried atitool voltage adjust is not working,anyone can confirm this?
10-21-2007, 07:09 AM
Trike

Tsaroth,

most people use RivaTuner and Ati Tool

Guru3d has just about everything for download

http://downloads.guru3d.com/download.php?id=13
10-21-2007, 07:13 AM
Trike

Quote:

Originally Posted by _g0

I think now under load is is consistently hitting around 90. Also, I had a hard lockup in FarCry last night, so I guess I'll scale back the OC a bit. Have you HEARD this thing at 100%? The neighbors across the street complain when that happens!!!

haha.. Try running crossfire at 100% on both cards.. man I'm gonna need those safety ear muffs

http://www.rahq.com/images/Bilsom/707_Earmuff_sm.jpg
10-21-2007, 07:29 AM
MotF Bane

Quote:

Originally Posted by roger_h99.nor

1. When disassembly the stock heatsink, I discovered that only half of the ramchips made proper contact with the thermal pads on the heatsink. (It's possible to see this because of thermal pads have a slight pattern, when proper contact is made this pattern disappear.

2. After flashing a PRO to XT, I noticed MVDDC was raised to 2.20V. I found this to be a lot higher than than nessesary. Card can bench at 999 with only 1.875 (may be even lower than this!)

Thus, try to lower MVDDC, You will have a cooler card.

I flashed my Sapphire Pro to Sapphire XT, and now back to HIS Pro. ATI Tool still shows 2.20 on MVDDC. Maybe that explains why the memory can't clock worth a damn for me, might be heating up too much.
10-21-2007, 08:07 AM
WrigleyVillain

Quote:

Originally Posted by roger_h99.nor

1. When disassembly the stock heatsink, I discovered that only half of the ramchips made proper contact with the thermal pads on the heatsink. (It's possible to see this because of thermal pads have a slight pattern, when proper contact is made this pattern disappear.

2. After flashing a PRO to XT, I noticed MVDDC was raised to 2.20V. I found this to be a lot higher than than nessesary. Card can bench at 999 with only 1.875 (may be even lower than this!)

Thus, try to lower MVDDC, You will have a cooler card.

Good find and info, thanks. Nice looking custom cooling job as well :up:

Quote:

Originally Posted by MotF Bane

I flashed my Sapphire Pro to Sapphire XT, and now back to HIS Pro. ATI Tool still shows 2.20 on MVDDC. Maybe that explains why the memory can't clock worth a damn for me, might be heating up too much.

Interesting. My 1GB-never flashed-is 1.550v. Whats the default on a 512 Pro?
10-21-2007, 08:09 AM
WrigleyVillain

Quote:

Originally Posted by coolice

just got my card yesterday and i tried atitool voltage adjust is not working,anyone can confirm this?

AT 0.27b2 works but it's finicky. Look a couple pages back in this thread for posts containing some tips etc. Needless to say, we are all looking forward to b3.
10-21-2007, 12:56 PM
Hicksetto

Hi,

I read that some Sapphire HD2900PRO 1 GB. has 1.20v. default VGPU. Could you please upload that BIOS if someone has?

Thank you very much...

Hicksetto
10-21-2007, 01:22 PM
WrigleyVillain

Quote:

Originally Posted by Hicksetto

Hi,

I read that some Sapphire HD2900PRO 1 GB. has 1.20v. default VGPU. Could you please upload that BIOS if someone has?

Thank you very much...

Hicksetto

Remember where you read that? 1.15 here and if I could find a BIOS giving me 1.2 I'd probably flash mine too. Haven't seen any other 1GB owners in this thread reporting 1.2 either. Thanks.
10-21-2007, 02:05 PM
MadDias

anyone with crossfire running vista?
i just found out that 3dmark06 and steam hardware survey only see one card and no crossfire. damn vista... m$ should be sued for making us use this bs os only to be able to have dx10...
10-21-2007, 02:24 PM
situman

Quote:

Originally Posted by roger_h99.nor

1. When disassembly the stock heatsink, I discovered that only half of the ramchips made proper contact with the thermal pads on the heatsink. (It's possible to see this because of thermal pads have a slight pattern, when proper contact is made this pattern disappear.

2. After flashing a PRO to XT, I noticed MVDDC was raised to 2.20V. I found this to be a lot higher than than nessesary. Card can bench at 999 with only 1.875 (may be even lower than this!)

Thus, try to lower MVDDC, You will have a cooler card.

What does the chip covered with the little black heatsink do?
10-21-2007, 03:54 PM
Tsaroth

Quote:

Originally Posted by Trike

Tsaroth,

most people use RivaTuner and Ati Tool

Guru3d has just about everything for download

http://downloads.guru3d.com/download.php?id=13

I couldn't make heads or tails out of Rivatuner.

I also had to trick the ATI Tool into going over 733 and 833 or something like that. I was setting it up to a certain point and it wanted to go back to a lower ceiling it had when I hit apply clocks or something.

I'll try again.

It was odd, when I was running 833/891 it was 3dmark06 stable but when I tried to play UT3 it crashed and I don't know if it was just a random lockup or had something to do with those speeds.

Are those speeds too high?

Also, what are some stability tests for the GPU other than 3dmark06? Just want to know so I can set the clock then test stability so I'm not in the middle of a game and go POOF.

I also put the fan to 100% and good god that thing is loud.
10-21-2007, 04:17 PM
WrigleyVillain

Quote:

Originally Posted by Tsaroth

I couldn't make heads or tails out of Rivatuner.

I also had to trick the ATI Tool into going over 733 and 833 or something like that. I was setting it up to a certain point and it wanted to go back to a lower ceiling it had when I hit apply clocks or something.

I'll try again.

It was odd, when I was running 833/891 it was 3dmark06 stable but when I tried to play UT3 it crashed and I don't know if it was just a random lockup or had something to do with those speeds.

Are those speeds too high?

Dont use ATI Tool to oc, hell you dont really want to use it for anything at this point unless you need to up the voltage as its the only software option for doing so now. And a buggy one at that.

With Riva Tuner hit that little triangle on right side of where it lists "512-bit R600 (320sp)". Otherwise use ATI GPU Tool. ATI Tool does have all the features/tweaks u need available but the latest beta just not great w our cards.

And those speeds are great for default voltage, tho not super high for what this card can really do under optimal conditions.

And dont put it at 100. its loud for a reason. Not set to do that in bios til at 105C which is HOT
10-21-2007, 05:34 PM
Hicksetto

Quote:

Originally Posted by WrigleyVillain

Remember where you read that? 1.15 here and if I could find a BIOS giving me 1.2 I'd probably flash mine too. Haven't seen any other 1GB owners in this thread reporting 1.2 either. Thanks.

Hi,

I found the thread below:

Quote:

Originally Posted by nickless

Thanks, I get the core and memory frequency to 901 / 2394 with stock voltage.
The default stock voltage of my card is 1.20v. I think this is some kind of bonus from ATI:clap:
I try to increase OC of my card a little bit more with more voltage but it looks like this is the max of my HD2900Pro under water:rolleyes:

Thanks,

Hicksetto
10-21-2007, 06:14 PM
WrigleyVillain

oh ya saw that post awhile ago. and? at any rate still no confirmation of any 1GB bios that gives 1.20 vgpu.
10-21-2007, 09:16 PM
CrimInalA

Quote:

Originally Posted by Lightman

I wouldn't be so certain ;)
Besides I just asked for a BIOS from card running @1.2V I simply want to compare binary files and try some other things. Also few selected overclockers have access to OCed BIOSes with higher voltages and frequencies, so I would strongly suggest that vGPU will change with proper BIOS! ;)

BTW nice MOD! Very clean and simple!
PS. My card can't work properly @0.9V/512MHz :(

Lightman , did you come across something comparing those bioses ?

Atitool 27b2 is too buggy for me to use atm , i get glitches ,hangups and crashes . im now using riva 2.05 but no voltage increases there (default 1.15) . 2.06 will come out soon i've read .

I am now at 860 core . 891 crashed my pc .
10-21-2007, 10:25 PM
nickless

Quote:

Originally Posted by WrigleyVillain

Remember where you read that? 1.15 here and if I could find a BIOS giving me 1.2 I'd probably flash mine too. Haven't seen any other 1GB owners in this thread reporting 1.2 either. Thanks.

Hi everyone,
Here is my BIOS with 1.20v GPU. I,ve saved it with ATIWinflash. Good luck!
http://rapidshare.com/files/62576432/r600.rom.html
10-21-2007, 11:07 PM
Draxx

I think as usual I have got the worse Pro there is, I can't even get to 790Mhz stable (there are artifacts in Whiteout).

:mad:
10-21-2007, 11:09 PM
WrigleyVillain

Quote:

Originally Posted by nickless

Hi everyone,
Here is my BIOS with 1.20v GPU. I,ve saved it with ATIWinflash. Good luck!
http://rapidshare.com/files/62576432/r600.rom.html

thx nickless! this is a stock 1GB Pro bios w 1.2?
10-21-2007, 11:12 PM
WrigleyVillain

Quote:

Originally Posted by Draxx

I think as usual I have got the worse Pro there is, I can't even get to 790Mhz stable (there are artifacts in Whiteout).

:mad:

did you test/bench before you flashed? All these Pros have seemed very consistent in general...
10-21-2007, 11:25 PM
roger_h99.nor

Quote:

Originally Posted by situman

What does the chip covered with the little black heatsink do?

I think it's a mosfet for the memory vddq voltage. It's cooled by a (small) thermal pad on the stock cooler.

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 10:25 PM.

XtremeSystems