Post your recent Q6600 purchases here (The Lookout for g0)

Printable View

Show 100 post(s) from this thread on one page

08-10-2007, 06:30 PM
ocZZZ

its a tuniq tower / also tried with my old ninja with the same result
08-10-2007, 06:46 PM
Ace-a-Rue

Quote:

Originally Posted by ocZZZ

its a tuniq tower / also tried with my old ninja with the same result

have you lapped either heatsink?...i do not lap the IHS since that is an illusive proposition with getting desired results...you get better results concentrating on the bottom of the heatsink.

are you running the fan on the tuniq at full speed?

are you priming in the case?...have you tried taking the side cover off to see how much difference it makes?
08-10-2007, 06:51 PM
ocZZZ

I haven't lapped cpu or heatsink *yet* although with these temps I am sure considering it. ya, its running in the case with side off with the fan at high speed

Quote:

Originally Posted by Ace-a-Rue

have you lapped either heatsink?...i do not lap the IHS since that is an illusive proposition with getting desired results...you get better results concentrating on the bottom of the heatsink.

are you running the fan on the tuniq at full speed?

are you priming in the case?...have you tried taking the side cover off to see how much difference it makes?
08-10-2007, 06:52 PM
icon57

Quote:

Originally Posted by beppe

yea i like tank guys they have excellent customer service. too bad i canceled and went over to clubit. since they said they had them in stock. tank guys dont have and ETA. but i will do business with them again :up:

yep, i just did the same thing
i will use TG's in the future, but i am sure all these canceled orders are gonna hurt business.
08-10-2007, 07:00 PM
dogsx2

For some reason preorders don't seem to work out. Remember the Yonah preorder?:(
08-10-2007, 08:10 PM
Ace-a-Rue

Quote:

Originally Posted by ocZZZ

I haven't lapped cpu or heatsink *yet* although with these temps I am sure considering it. ya, its running in the case with side off with the fan at high speed

that should be your mission; to lap the Tuniq.:)
08-10-2007, 09:26 PM
TheWolf

Anyone know what the batch numbers [or newest ones] coming from ClubIt are?
08-10-2007, 09:36 PM
politenessman

i just got mine from clubit - slacr, l723a795. the vid is 1.088v.
08-10-2007, 09:38 PM
TheWolf

Quote:

Originally Posted by politenessman

i just got mine from clubit - slacr, l723a795. the vid is 1.088v.

Let us know how it OC's & temps.
08-10-2007, 09:49 PM
GripS

thats an extremely low VID. I'm curious on the difference between that and the ones with 1.2x VID
08-10-2007, 09:53 PM
politenessman

Quote:

Originally Posted by TheWolf

Let us know how it OC's & temps.

so far around 3300 @ 1.32v. wont post at 3400. temps are outrageous, like 48c idle 75c load with ultra120. so much for the legend about low vid.
08-10-2007, 09:57 PM
GripS

whoa! That's insane... I guess lower VID really does mean higher temps are ahead. Recheck your HSF install before making any rash conclusions.
08-10-2007, 10:02 PM
politenessman

reported wrong. vid is 1.2000v, which is still pretty low, tho. hs/f is ok. small possibility it could be 680i.
08-10-2007, 10:02 PM
Ace-a-Rue

it could be the bios reporting incorrectly...even if it is coretemp, there is no guarantee that it is right with this new step!
08-10-2007, 10:08 PM
strange|ife

man i really hope i dont get a chip that runs that hot from clubit when i order in a few days.......

so i guess the general idea is Low vid may yield a higher OC, at a cost for oven like temps.
08-11-2007, 12:54 AM
largon

Low VID = high leakage bin -> steeper curve of power consumption when overvolting/clocking

Still no word on Euro availability?
:\
08-11-2007, 01:33 AM
Clint

Quote:

Originally Posted by largon

Low VID = high leakage bin -> steeper curve of power consumption when overvolting/clocking

Still no word on Euro availability?
:\

I have a pretty good overview over the Swedish market, and so far no G0 here.
:shakes:
08-11-2007, 03:50 AM
SiGfever

Quote: "Let us know

1. where you purchased it
2. when you purchsed it
3. which stepping you got"

1) ClubIT
2) 8/4/2007
3) "GO" SLACR L723A (vid = 1.2125v)

http://img170.imageshack.us/img170/796/q6600goxu4.jpg

http://img407.imageshack.us/img407/2079/q6600kb6.jpg
08-11-2007, 05:06 AM
ocZZZ

Purchased From: ClubIT
Purchase Date: 8/3/2007
Stepping: "GO" SLACR L723A
Results "so far": 3.5ghz @ 1.35v / 3.6ghz @ 1.41v (running hot)
08-11-2007, 05:32 AM
politenessman

clubit
8/4/07
l723a795

3600 so far, 1.35v vcore in windows, temps 48c idle, 75c load.

wont post at 9x400, but runs fine at 8x450. but this is probably my mainboard. cores 0 and 1 are running about 10c higher than 2 and 3 in idle.
08-11-2007, 05:47 AM
Touay002

I just got my Q6600 G0 L729A312 Pack Date: 07/31/2007
VID 1.226
running Prime95 now @3600 @1.46V.
Ambient ~23C
all core are around 61C.
08-11-2007, 08:20 AM
bobov

Quote:

Originally Posted by politenessman

i just got mine from clubit - slacr, l723a795. the vid is 1.088v.

speedstep?

Try to run coretemp 0.95 to check your vid. The VID of my Q6600 G0 from clubit is 1.2250v, vcore is 1.088v @ idle when speedstep kick in.
08-11-2007, 08:35 AM
timber715

got myself Q6600 G0 SLACR L727A673 pack date: 7.31.07 from a store in hk downtown
08-11-2007, 04:31 PM
NoSoMo

Quote:

Originally Posted by dogsx2

Never answered the question, are you a reseller trying to make money?

Seems dumb to come on a forum saying you tried to buy 24 cpu's when many here are wanting them.

No, I am reselling and making money. The US is a capitalist society and we're all trying to make money. I'm a business, LLC to be exact, and I'm with everyone else trying to make a dollar. I'm actually just trying to pay for my home machine to be upgraded. :shrug:

I hope you don’t have a problem w/ business!?! TankGuys bought 150 of them. What's wrong w/ my 24?

Check eBay for g0s, there are a few of them on there.
08-12-2007, 03:14 PM
dogsx2

Quote:

Originally Posted by NoSoMo

No, I am reselling and making money. The US is a capitalist society and we're all trying to make money. I'm a business, LLC to be exact, and I'm with everyone else trying to make a dollar. I'm actually just trying to pay for my home machine to be upgraded. :shrug:

I hope you don’t have a problem w/ business!?! TankGuys bought 150 of them. What's wrong w/ my 24?

Check eBay for g0s, there are a few of them on there.

Yes, I have a problem with it. There is a difference between getting them from a distributor and buy them when a item first comes out and making a buck because of lack of availability. This happened before on XS and I posted the same thing before.

If you can feel good about what your doing then you have to live with it, just don't come here posting about how you bought or tried to buy 24 cpu's to resale on ebay when members here couldn't get theirs.

I am an old American and sometimes because something is legal or "the American way" doesn't make it right.;)

Show 100 post(s) from this thread on one page