this is the last week of competition . w8 to the end of course you see over 1800 :D
Printable View
Supertalent 2*1gb d9gkx 1400mhz valid
I'm in a club ?
@1300 can pi 1m
Later i fixed 1400mhz for 1m.
xTreme job, guys! Well done :up:
I have some good sticks but the MB is tricky. Could anybody show the sub-timings for TPower. Just failing above 670-675 Mhz. :(
Was wondering where this thread went heh
Plucked in Team PC2-10400 CAS6 Micron D9 memory for some max validation and pulled off my own personal best at 706Mhz 5-5-5-15 at 2.49v bios set vdimm dual channel :D
http://valid.canardpc.com/cache/banner/522198.png
http://fileshosts.com/intel/DFI/DFI_..._validated.png
This is great...2.34v bios F6.
Some single channel tests from me.
Validation - 750MHz(1500)
CPUz often makes my valids rejected with F7 BIOS.
That was the maximum i reached with F4
747MHz(1494)
And super pi 1M single channel again
http://img22.imageshack.us/img22/919...zsuperpi1m.jpg
Some stability tests
Single channel - 2.3V BIOS here
Dual Channel - I cant remember what V 2.3 again or 2.25.
Tests are with 2x1GB Transcend Axe 1200+
I had 2x1GB Transcend Axe 800MHz which were able to do almost the same D9GMH + UD3P rock :D.
And i forgot all on air, but at -2 ambient :D.
very nice fsb there coop. keep pushing and see how far it will go.
coop sickness 0_0
I just got aXeram 1200+mhz sticks and they rock (kind of)!
Had just little time to test them and heres result at one stick http://valid.canardpc.com/show_oc.php?id=527120
I had little problems with dual channel at 700 mhz on M2F board.
may i join the club?
crucial ballistix tracer pc8500 :D
http://valid.canardpc.com/cache/banner/531866.png
http://forum.hwproject.net/imagehost...53a5bc5d8b.jpg
Congrats :up:
thanks mate ;)
finally i managed to find a very good kit. it rocks :D
Finally managed to get into this club :D Using a set of Team Group 8500's and my X48-T2RSB Plus managed a personal best so far of 700.9 MHz.
http://i720.photobucket.com/albums/w...700MHzCAS5.jpg
very nice CryptiK, what vdimm was
needed for the teams?
Cheers guys. Vdimm used was overkill, 2.78v. I just finished benching SPI32M at that voltage and thought I'd have a go at 700 MHz and as expected they did it easily. Didn't try and figure out what the minimum voltage they needed was.
1:1 is a bit harder :D but most should already know this one
http://www.abload.de/img/aufzeichnenvk99.jpg
as always angoholic that FSB is sick.735Mhz at 1:1 is awesome
No thats a bug with that board and cpu z..the t2rs plus is ddr2 ;)
Wow :shocked: . Thats sick :yepp: :up:
FSB WR
great job
hast gut gemacht ;)