I looked at your pics....great job!
I looked at your pics....great job!
funktional ill say it again, that is 1 sick setup, nice work bro :toast:
Thank you guys :banana:
I'll keep you updated :toast:
And one more with the watercooling on gpu card...:D
shidokanjohn get us a pic with side panel of, lights on, and showing good detail ^_^
You will have the pic after going back home from work.
sorry for the delay,hope this is ok.Quote:
Originally posted by r3b0rN
shidokanjohn get us a pic with side panel of, lights on, and showing good detail ^_^
very sexy :D
ill have a few pics up soon, just gotta get some imaging software to resize.
there´s some cool rigs in here .. :toast:
I´m gonna ad mine later on.. Hope its no to ugly in comperison..
Gonna take rid out of comp tommorow, blocks should hopefully arrive on monday. So then in the go please a couple of heatercores for some benching :)
The waterblock is a GF2 block from dangerden (old full copper model) and the tec is a 172w piece.
It runs @ 12v (instead of the basic 24) so do not expect TOO low temps :)
http://members.home.nl/epsilon/pelti...v/DSCN0483.jpg
The coldplate and All of the insulation is home made ;)
http://members.home.nl/epsilon/pelti...v/DSCN0492.jpg
more pics here:
http://members.home.nl/epsilon/peltier/gpu_172w_12v/
On my CPU fits a prommy @ r507 :)
My rig isn't finished as you can see ;)
my rig;
http://backupoc.frac.dk/bias/rig.jpg
comments?
My setup..
...
bjaas looking good :)
might want to turn the lights on so we can get a good look
now is that a mk1 or mk2 and what are your system specs
pic with light´s is comming sooner :p
anyway giga k8nnxp - a64 3200 - 9800 pro and mach I
nice specs man :)
thx :toast:
yeah I am quite happy my selvf. although the SuperPi could be lower :)
new bench rig
Abit Ai7
P4 2.4C
Mushkin 1GB LVL II Pc3200
Radeon 9600XT
#2
Ram
#3 Radeon 9600XT Closeup
Dats fulllaah sick dude. What you plan to cool it with?
Phase change!!!
very nice setup!!! can't wait till you get some hardware in it huh?? :thumbsup:Quote:
Originally posted by Epsilon
The waterblock is a GF2 block from dangerden (old full copper model) and the tec is a 172w piece.
It runs @ 12v (instead of the basic 24) so do not expect TOO low temps :)
http://members.home.nl/epsilon/pelti...v/DSCN0483.jpg
The coldplate and All of the insulation is home made ;)
http://members.home.nl/epsilon/pelti...v/DSCN0492.jpg
more pics here:
http://members.home.nl/epsilon/peltier/gpu_172w_12v/
On my CPU fits a prommy @ r507 :)
My rig isn't finished as you can see ;)
Here are Pics of my Benching Rig:
http://www.cool-cooler-the-coolest.d.../images/22.gif
http://www.cool-cooler-the-coolest.d.../images/21.gif
Click here for more Pics and HighRes. Pics!