http://www.mediafire.com/?8hx8f2k332dlpf3
new bios posted over at KC
Printable View
http://www.mediafire.com/?8hx8f2k332dlpf3
new bios posted over at KC
bump anyone have any ideas also getting alot of error code 58Quote:
Originally Posted by the_real_7
what the differences / changes?Quote:
Originally Posted by l0ud_sil3nc3
wow big jump 2105 to 3202 on numbersQuote:
Originally Posted by l0ud_sil3nc3
im sorry to hear friendQuote:
Originally Posted by the_real_7
i would inspect socket for bent pins i have 2 friends here in Uruguay with hell codes and where that, they couldnt see it and i told them to use magnifyer
I'm going to get a magnifying glass and check each pin , if nothing ill have to order another chip and check to see if chip or board , this is the pita of situtions :mad:Quote:
Originally Posted by andressergio
im sure u have a bent pin will not error so hard if notQuote:
Originally Posted by the_real_7
just on a new after rma, just with a comment code 00 motherboard an AMD7970 dead
anyone knows what is the last version of AI SUITE II for MIVE ? i have one but no digi/vrm on software control
or link to the last ?
thanks in advance
Sergio
Guys my M4E keeps pulling codes too mostly 65 which is CPU right? I think imc pulls this code if ram setup isn't happy, it just doesn't seem to like my g.skill psc rams, the rams and CPU run fine on lower end Asus boards.....
Oddly I have a P8Z68-V PRO that runs great except sometime it pulls a post error for excessive USB current draw detected, system shutting down but even when nothing is in USB it still pulls error .... So two problem Asus motherboards ....
:(
Any news on Z77 range yet?
...
Whit Gskill an 2133 7-9-7-24 1T 1.65v org: 7-10-10-27 1T 1.65v I can run 1024wpime but nut use it in game/bf3 In game is set 18XX max
3202 bios is to 68Z ?
opdat
The new bios does not look as before, the new can but see several tweaks at all seen
:D 1 more opdata
100p more in 3Dmark06 cpu score test whit 5.3GHZ I7 2600K an old vcore 1.565v whit new bios 1.525v an farst wprime32m old time 4,8xx new 4.6xx
so i take it the new bios is working well for you:)Quote:
Originally Posted by Martin.v.r
yes:up:
The chip is fine, I run p95 blend 5ghz 1.428vcore 30min on water, that was the max stress the cpu has had on it. I bought it new and didnt own it a week, sold it because of limited multi. Never benched the chip because it is limited to 53x multi. Do you have any other kits of memory to try?Quote:
Originally Posted by the_real_7
I ran this while talking to Andressergio on MSN, because he was interested in the CPU also.
http://img714.imageshack.us/img714/7342/p95.png
Uploaded with ImageShack.us
Post code 58 is ram related. See if you can boot to bios (with a single slot memory) and change the dram settings like add more vdimm.
so it worth a try ? what are those new things you mentioned ?Quote:
Originally Posted by Martin.v.r
uff the look on new bios is horrible letters on bold
i still cant see the dif
Hey thanks for Detective Sergio and you for helping out figure out this problem with the error 58 , man it had us banging are heads , never thought a damn cat hair could knock out part of my chip Oc Nub , you live and learn everyday , chip running great by the way thank again:up:Quote:
Originally Posted by OC Nub
This was me at first after trying new chip LOL
http://i84.photobucket.com/albums/k7...20pc/Brown.jpg
Picture of pins , inspecting pins
http://i84.photobucket.com/albums/k7...c/DSC00652.jpg
2 x closer picture of pins
http://i84.photobucket.com/albums/k7...c/DSC00656.jpg
10 x closer picture of pins and the culprit of my error codes " thank sergio for finding this critter "
http://i84.photobucket.com/albums/k7.../hairinpin.png
yea you where right it was ram related cuase i was knocked out 3 slot only for was working thanks DumoQuote:
Post code 58 is ram related. See if you can boot to bios (with a single slot memory) and change the dram settings like add more vdimm.
ivy bridge supportQuote:
Originally Posted by Darknight
I use xtreme setup
Quote:
Originally Posted by aussie-revhead
Check secondary and the third set of memory timings - the ROG boards had a few settings that were tighter than the lower end boards last I checked.
if the GSkill memory you are referring to is what I think it is, then they are BBSE (not PSC) and should clock very well on the M4E.Quote:
Originally Posted by aussie-revhead
RMA your board and start fresh, I am sure almost all of your problems have been the board and not all the cpu's that you have binned through.
i told you it was something on the socket, glad we worked it out friendQuote:
Originally Posted by the_real_7
enjoy your chip
cheers
Sergio
With this new bios i can't run my memory up to 1333mhz, the board reboot infinitely !
I'm going to try new bios tonight.
My Gene-Z does same thing with the IB supporting bios and either 2x4 Samsung or Hynix sticks (no probs with 2x2 Hypers). System kept rebooting at any mem speed over 1333 no matter what timings/vdimm. The solution for me was disabling the Memory bandwidth booster option. When disabled even 4x4 at 2133 is good to go :up:Quote:
Originally Posted by Moz007
I don't have this option with this bios, where do you find it ?
yes i dont know why on earth its that parameter as every time i put on PC wont start...definetly not usable, i never use it runing 16GB of 2133 CL9Quote:
Originally Posted by Viss
yes first page where u tweak vdimm, vcore etc its thereQuote:
Originally Posted by Moz007
I had it with 2105 bios but not in 3202... :(
And i can't go back to 2105...
Hey, I was going to try that one out, but there's a new official bios on ASUS webpage for m4e (2302). I'll try that one instead. Cheers.
I hate this bios, first flash went waaaay wrong, get 00 post code, board shuts off. So like a genius I decided to flash the other bios, and now I am on the UD5 again. Basically the bios's are toast.
I and several others would disagree, this bios is fooked!Quote:
Originally Posted by Martin.v.r
i second this and advice strongly NOT TO USE itQuote:
Originally Posted by OC Nub
its crap
this i would try new 3202 is crapQuote:
Originally Posted by FedericoUY
new bios official one is very nice passed 1h+ blend on a notch less of vcore with 16GB at 2133 CL9 5GHz HT
http://img189.imageshack.us/img189/7415/blend23021.jpg
http://img826.imageshack.us/img826/7964/p1120221.jpg
http://img546.imageshack.us/img546/8576/p1120217p.jpg
Uploaded with ImageShack.us
try the new official from ASUS works as a charmQuote:
Originally Posted by OC Nub
so is the z68 MIVE as good as the original p67? i'm thinking about giving aSB a try finally and want to know what to get for best OCing results.
hey mate how you doing !Quote:
Originally Posted by radaja
all the Z68's i tried where not good, it was on GIGA dunno on Asus, so far the MIVE P67 B3 amazing board
cheers !
Sergio
will since im starting to tweak 2105 . . . im going to pause and update this bios , thanksQuote:
Originally Posted by andressergio
i'm doing good,how about yourself Sergio?Quote:
Originally Posted by andressergio
so then i guess i will grab me the P67 B3 MIVE,they are cheaper too,so thats good
thanks for the advice Sergio!!
have you found a cheap mive , can you , let me know i need a second one and hard to findQuote:
Originally Posted by radaja
Anyone know how to go back in 2105 bios ?
You can flash a previous bios version with ROG connect.
andressergio
this res you use, it kills your Flow in water
Thanks Viss, i go back to 2302 and it's working at 2133mhz !
I used bios flashback and worked as a charmQuote:
Originally Posted by Moz007
Yea also with thisQuote:
Originally Posted by Viss
Not at all Martin. Flow is huge and amazingQuote:
Originally Posted by Martin.v.r
Glad to help buddy any doubt drop me a pmQuote:
Originally Posted by radaja
guys will ask again
what version of AI SUITE II are u using or where's the latest to download (i remember the one on ASUS its like old and new was posted here like 1.04 wich im using but has no digi/vrm on it)
thanks
Sergio
oh no i meant cheaper than the Z68 MIVE at the Egg:DQuote:
Originally Posted by the_real_7
i am on vers. 10203. if i remember correct i got it from the asus site :)Quote:
Originally Posted by andressergio
hey firend how's all ?Quote:
Originally Posted by Sauron_Vie
thanks im on that 1.04 posted here but weird theres no update yet
hope we catch on msn soon
cheers
Sergio
everthingīs ok buddy, just a little stressed :D
recignized that 1.04 got no digi/vrm, thatīs why i am still @1.02.
will look @ you @msn soon ;)
cheeeers mate
you can have mine i bought it cheap;)Quote:
Originally Posted by radaja
I used the bios flash back, now Im back on 2105. After trying the flaky bios posted on the lsat page, I have been unable to change the CPU multiplier on any bios. Any suggestions on what is causing this?
get on msnQuote:
Originally Posted by OC Nub
mwave has open box or refurb for 179.00. Came with everything, like new.Quote:
Originally Posted by radaja
Got a link?
:)
geeks has it for $159.99 refurbished as well, so plenty of choices radaja.
i think i will move to US SOON lolQuote:
Originally Posted by l0ud_sil3nc3
link, link , link ..... pleaseQuote:
Originally Posted by l0ud_sil3nc3
:)
Quote:
Originally Posted by andressergio
http://www.geeks.com/details.asp?inv...X-PB-R&cat=MBBQuote:
Originally Posted by aussie-revhead
it just went out of stock:(
still mwave for $20 more is still a great deal.
even @ 200 its a great price lolQuote:
Originally Posted by l0ud_sil3nc3
i was happy when i got it for 260$
yes,and thank you:DQuote:
Originally Posted by zsamz_
I paid full retail at launch and I still think it is one of the best boards I have owned to date.Quote:
Originally Posted by zsamz_
I tried to flash to this bios a few days ago, something went wrong. I got 00 post code and board wouldnt boot. So I switched bios chips and tried flashing the other bios, the flash took, but I was unable to change the CPU multi. I used the rog connect and flash back to 2105 bios on one chip, the 140x (cant remember) on the other bios chip. I have been unable to change the CPU multiplier even after flashing back to older bios that had been working fine. Spent several hours trying but with no luck. Any suggestions on what the problem may be?Quote:
Originally Posted by l0ud_sil3nc3
no ? whit new bios I can use all x56 an blck is 53x103.9 max on watercooling
bios 2105 max blck 102
honestly I don't have a cpu to test it with so I just dl and it posted the link here, I should have a 2500k here Tuesday to test with and I will let you know.Quote:
Originally Posted by OC Nub
It is weird that Martin has positive things to say, but I think he might be the only one.
Anressergio and I have been messing with this trying to get somethingto work, but so far nothing is helping.
I lost some settings, even after reflashing several times. Either something simple I am missing, or the bad flash from a few days ago totally fooked the board :shrug:.
http://img268.imageshack.us/img268/9...0305130342.png
Uploaded with ImageShack.us
i have problems also with 3202 and have to go to 2105 then to 2302 i was lucky to do it but not OC nub im trying my best to help but seems that bios stays the sameQuote:
Originally Posted by l0ud_sil3nc3
oh man that's really bad looking:confused:Quote:
Originally Posted by OC Nub
so it fails to flash to any other bios, i.e. you are stuck on 3202?
Hey mate seems that some part of the bios flashes but others not we are trying to flash with dos lets see how it goesQuote:
Originally Posted by l0ud_sil3nc3
What does MSR 0xCE read (can be got from cpu-z dump) and what does BIOS setup show the ME version as?Quote:
Originally Posted by OC Nub
thanks some_one and all of you guys, last nite we tried the official asus dos flash, still no results from OC nub but i PM'd raja asus to see if he cant help cauz its turning into a mess, bios and both seem to update just a part
you can see perfect the version for ex you flash 2105 and reads 2105 i checked he checked but those options are gone an we cant adjust multi
Cheers to all
Sergio
If both BIOS chips are using the same build and are corrupt and you cannot use BIOS flashback from UEFI, you will have to RMA the board.
What about borrowing BIOS chip from another board?
seems so raja...thanksQuote:
Originally Posted by Raja@ASUS
this would be wise donQuote:
Originally Posted by donmarkoni
thanks !
Sergio
Fair enough Sergio.
FYI the 3 series BIOS contain a new Management Engine Firmware 8.x update so if you try to roll back to a pre 3 series such as 2105 it might be possible that only the BIOS region is flashed while the ME region remains at 8.x. This is why I was asking about ME version in the BIOS setup. If it's screwed then it might show N/A.
By checking MSR 0xCE it might be possible to see if the problem were ME induced or BIOS side.
Note that Asus BIOS might have a quirk that if you disable turbo boost then it removes the multiplier setting from the setup screen. :shakes: However in your case unless your using a backup that setting should be reset to enabled by the flashing.
Hope you get it sorted soon.
Thanks everyone for the help!
No matter what I tried the setting was gone from the bios.
I bought the board from mwave.com for 179.00, its a refurbished board. Ill save it for building the wife a PC, it runs fine stock.
I ordered a new board last night, should have it by the end of the week.
This P67A UD5 has been a good board, but it does not seem to clock as well as the M4E, I was able to run the 2550k at 5500mhz easy on the M4E at 1.54vcore, the UD5 takes well over 1.6v and doesnt usually finish the benchmark before crashing.
Glad to help mateQuote:
Originally Posted by OC Nub
i would order this for 15 dollars...u save the board
http://www.ebay.com/itm/BIOS-CHIP-AS...item3cb8eac054
cheers !
Sergio
that is the best idea I think:yepp:Quote:
Originally Posted by andressergio
hi buddy,Quote:
Originally Posted by andressergio
i got also problems with the 2302 (BSODīs always with 0x124). i used the the option "Copy current bios to another flash" within the flashback menu, because i had the 2001 @ Bios 1. It worked without problems. Canīt use OC Nub this option as well ?
cheers
I have a dumb question, I probably overlooked it. But looking if there's a way to set the system to shutdown if it detects under a certain rpm for cpu?
I recently had my pump fail and want to prevent that experience in the future. I hooked up the 355 to the left most cpu fan header on the top right of the socket, board shows the rpm correctly as it reads ~4500rpm. Just didn't see an option for fan failure.
Any ideas?
guys i need some help here
i remember shooting 108x52 last time i tested now i can boot at that i see on post but when i enter windows shows 100x50
i re flashed bios, went to 1850, tested on the other BIOS, touched skews nothing seems to work, except AI SUITE II
what can be ?
cheers !
Sergio
I remember that I've seen it long time ago... Found it! owikh84 had BCLK stuck at 100MHz but I didn't see a clear solution, or maybe I wasn't looking carefuly. You can PM him to ask.Quote:
Originally Posted by andressergio
:toast:
thanks don for your help i reallly dunno whats going on i can do it on windows but and it posts perfect but when i enter win no changesQuote:
Originally Posted by donmarkoni
cheers !
Sergio
hello guys, it has been like 6 months from when i last played with my oc settings. What bother me now is that my 95% stable oc suddenly turn out to be non-stable? i passed 6 hours prime 95 Blend custom with 90% ram, and 1344/1792 FFT both 30 min tests.
What is the issue now? my pc randomly double boot on cold boot, and either bootup into windows after the double boot, or just freez on windows logo. I'm using the 1850 BIOS, which at the time was good for most of the users, and it was working fine for me.
Here are my settings.
VCCSA Voltage: Auto
VCCIO Voltage: 1.1
CPU PLL Voltage: 1.7
Auto PLL Overvoltage: Enabled
PCH Voltage: Auto
VRM Switching frequency: 350
Vcore PWM/Duty Control: Extreme
Vcore Phase Control: Extreme
Vcore Over-current protection : 140%
CPU Multi - 50 by all cores
CPU BCLK: 100
CPU voltage/vcore: 1.435v
DDR Voltage: stock volts 1.5
CPU Spread Spectrum: Enabled
LLC: Ultra High
So do you guys recommend some newer (more stable BIOS) and what settings could i change? thanks!
I use 1409/3202
you have 2 bios chip on your motherboard ;)
Since you posted that 3202 2 of use went with bios corrupted Martin i dont think aint something to recommendQuote:
Originally Posted by Martin.v.r
There is no 3202 BIOS at Asus page?
no it was posted here and some of use tried and ended borking our bios chipsQuote:
Originally Posted by psyside
I posted a link from KPC, but there seems to be quite a few negative reports of using this bios so be warned.Quote:
Originally Posted by psyside
Thanks for the answers guys.
So i'm left with what BIOS version from the recent ones? has anyone from you guys tested oc stability with latest version/s? how does it compare to 1850? i think it must be better cause is alot newer and not beta?
use 2302Quote:
Originally Posted by psyside
yeah horrible bios l0ud i cant move bclk from bios anymore on both chips...even that i used rog to restore them i cannot just on win yes...no matter what bios i tried all from 1409 i boot at 108x52 POSTS Correct the values but on win i see 50x100 :(Quote:
Originally Posted by l0ud_sil3nc3
Quote:
Originally Posted by andressergio
so sorry about that sergio, really weird that the settings aren't sticking in the bios but you can change them in windows.
maybe time for RMA?
No i bought 2 new bios chips but settings keep I can boot at x56 np but is bclk not workingQuote:
Originally Posted by l0ud_sil3nc3