Printable View
yesterday I've got my used Cellshock DDR2 1000 CL5 ehich I bought for 15€ on eBay.
Here Some results:
testing system:
Intel C2D e6600
Gigabyte P35DS4
Cellshock DDR2 1000 CL5 2.3V ( MIcron D9GKX )
Jetway 8800 GT
Excelstor 80 GB Sata
Thermolab Baram
Validation @ 1200 CL 4-4-4-12 with 2,6V active Air cooling:up:
Here the SuperPi32M Screenshot
http://img522.imageshack.us/img522/2...200cl426v2.jpg
Nice result, but you will kill them sticks with 2.6v, see if you can get away with 2.3-2.4v :up:
Nice clocks aslanwas, impressive getting 600 MHz CAS4 32M stable.
I don't think that's going to happen at 2.3 - 2.4v though.
I have a kit that have been run at 2.5 - 2.78v on air (with fans of course) for at least 15 hours, and I have since stress tested them and they are as good as ever, no degradation at all. Some kits are just more resilient though.
I think you got lucky there. When I used to do some testing for Mushkin I blew a kit of D9GMH up with 2.5v.
Can anyone help, need a rough idea of how much i should be selling my 2*1GB Cerllshock 1066C5 for (i got 2 sets), selling old kit always puzzles me and i never know what too ask for them
Depends how well they clock. From what I know the C5 kits really suck, so no more than about £25 IMO.
Quote:
Originally Posted by CryptiK
With a voltage between 2,5v- 2,78v , the more time will pass, the more your kit will require more volts and can be endommaged even with the best possible cooling :(
As said Ket, your'e lucky for the moment :D
My results:
Asus P5B dlx
E2220
TeamGroup Xtreem DDR2 PC6400 4-4-4-10 +corsair airflow
Thermaltake toughpower 750W
Spi 1M :
600 cas4 dual Channel @ 2,45v
http://img43.imageshack.us/img43/8872/77461257.jpg
Maxscreen :
single 621 Cas 4 @ 2,45v
I'm waiting for ddr maximizer ( vmod dimm of P5B dlx is too dangerous) and a dimm containers(excellent for drice)
I'm wainting also for a patriot gkx kit and P45 UD3R :D
I'm aware that voltage I stated using will eventually degrade the sticks, but it's not going to kill them instantly or anything like it. I know a few people that have used kits at and around 2.4 - 2.6v on air for many hours with no degradation.
Nice results from the TeamGroup & P5B Dlx. Is that BIOS set voltage or real voltage you stated?
Not sure what you mean by the vdimm mod being too dangerous to do. I used to own one and performed the vmem mod (in addition to the vdroop mod and vMCH mod), and I have to say it was a very easy mod to do, as the mod points are very large and easy to solder to. I simply used a DMM to tune the voltage as I desired and never had an issue. Best of luck with the maximizer if you do decide to go that route.
Quote:
Originally Posted by CryptiK
good idea , i will check it this evening with a voltmetre.:up:
For the P5B deluxe , i have done the vmch,vnb, vcore mod and capacitor mod to sleek the vcore but i'm afraid of the vdimm modd : jmax_oc from Jmax hardware has killed 2 P5B deluxe with the vdimm mod :(
He killed them doing the mod and making a mistake or by using a high vdimm after the mod? Mine handled up to around 2.6v fine, but I did not use more than that.
One of my Corsair Dominator 10000 sticks gave up the ghost after being run 24/7 at DDR2-1200 with 2.05v. Very odd, although it seems to have died during the transition between power supplies. I wonder if maybe I killed it with ESD? In any case, I wonder what kind of crap Corsair will replace the kit with.
i think you be fine with replacementsQuote:
Originally Posted by Shiranui Gen-An
me personally i was lucky enough that every corsair ram i have bought has died in a matter of days or didnt cut it
i never did smoke crack to pay the pc2-10000 price lol
my ballistix did 1200+ for over a year n are 1000%
Well the problem is, TWIN2X2048-10000C5DF is EOL since they used D9GMH/D9GKX. Unless Corsair pulls another miracle like they did last year with my 6400C3DF kit, I don't think they'll be replaced with the same thing.Quote:
Originally Posted by zsamz_
those cass sticks were mostly crapQuote:
Originally Posted by Shiranui Gen-An
they liquidated alot of the pc2-10000 stock a while ago
i think u be gettin gkx:yepp:
Well, they were the only sticks I had that could do DDR2-1200 CAS4 stable with only 2.45V :mad:Quote:
Originally Posted by zsamz_
:rofl: most kits i got can do it:rofl:Quote:
Originally Posted by Shiranui Gen-An
I wouldn't be so sure.. I just left my PC on downloading stuff overnight when I blew that kit of D9GMH up with 2.5v. Woke up next morning to a blue screen. Even with heatspreaders, decent thermal paste and active cooling, I can't recommend over 2.4v if you want any time at all to get some decent clocks out of them. Still, if they didn't cost you much, then your not losing a lot when you do blow them up :DQuote:
Originally Posted by CryptiK
I just ordered this kit from Amazon Japan on 8/5 and look what was waiting for me at my parents' house yesterday :eek:
http://img132.imageshack.us/img132/2...c00361a.th.jpghttp://img194.imageshack.us/img194/7...0363iwg.th.jpg
It comes with a overclocking/BIOS guide courtesy of the distributor in Japan (Overclock Works).
http://img132.imageshack.us/img132/6...0362qbz.th.jpg
A 2009 serial number?!
http://img196.imageshack.us/img196/6...c00367y.th.jpg
The last shot of them sealed before exposing them to the cruel world
http://img196.imageshack.us/img196/5...0364xrs.th.jpg
Ta-dah!
http://img132.imageshack.us/img132/6...0368aoc.th.jpg
Now, let's strip these babies naked and see what flavor of Micron lurks underneath those gorgeous heatspreaders...
http://img5.imageshack.us/img5/7613/dsc00369map.th.jpg
D9GMH. I must admit, I'm a little disappointed as I was hoping for GKX, but Team 8500 with GMH has shown some insane overclocking potential for others so I'm eager to see what this kit can do!
i'm waiting for your tests Shiranui Gen-An :yepp:
Shiranui Gen-An - you think that they would ship to Europe too?
If built on a good PCB, D9GMH will clock better than D9GKX. My D9GMH kit I got to 1200MHz 4-4-4-12 :yepp:
it isn't a ruleQuote:
Originally Posted by Ket
maybe your gmh kit is better than your gkx kit, but it isn't allways true :)
We know no IC is created equal, but a good PCB does make quite a large impact. Most GKX ICs won't do 1200+ 4-4-4-12, only 5-5-5-15. GMH ICs on the other hand can do 1200+ 4-4-4-12.
Well, Amazon Japan doesn't ship electronics outside of Japan. I actually had the memory shipped to someone I know who lives there and he shipped it to me via EMS. The shipping was free within Japan from Amazon and the airmail to the US only cost me $15.Quote:
Originally Posted by kuebk
740 C5 reached with UD3 :D ...don't gat the screenies atmo but workin' on this rig for now and don't miss tha MIIF fa sure ^^
Don't even tried C4 :/ but I'll do it !! so pleasant to get high memory frequencies in DDR2 \o/
3D's goin' on @700 C5 5/5/5/15/42 2T with 2,6v, but encreasing voltage don't give me any stability over there :( ...for 32M I have to get more time lol
Nice! Yet another satisfied convert from MIIF to UD3P ;) Was the best motherboard change I ever made.
Just wanted to report my 2nd 2x1GB CellShock DDR2-1000 4-4-4-12 D9GKX kit died on me after only ~3 months of usage at 2.15v. I almost never turn off the computer, it usually runs 24/7, only when I go away for like a day and fear there might be some thunderstorm which was the case now and I turned comp off and flicked psu power switch off and pulled out the power cables from wall socket. Then when I want to turn on the comp again it simply didn't wanna post, but what's more weird is that both sticks were dead, putting some backup ram kit in and it posted immediatly. I think it might be some incompability with this Gigabyte P35 DS4 board and micron D9GKX ram, I had some Team Xtreem D9GMH which I used for like 1½ year (bought it of another person and it was old from 2005) tho until one stick became a bit bad, had trouble booting. But sometimes I also hear some weird electric noise when flicking off the PSU power switch, but it's very rare but perhaps there's some probs with it.
So now it's the 2nd time I RMA this kit. :p I was questioning whetever or not to do it as I'm planning to upgrade to Socket 1156 in near future anyway but for 3.50 EUR I might as well do it for such awesome clocking DDR2 ram.
After struggling to clock my new Team 8500 D9GMH kit past 600MHz (seriously) with the UD3P, I got frustrated and decided to pull my UT P35 back out. Lesson learned: Never send a Gigabyte to do a DFI's job.
http://img23.imageshack.us/img23/584...50mhzpl61m.jpg
:yepp::yepp::yepp:Quote:
Originally Posted by Shiranui Gen-An
the ut just loves da gmh
not all UD3P are created equal nothin new
but 99% of utp35 rock
This is what my DFI DK X48-T2RSB Plus managed with a kit of Team Group D9 GMH on DICE.
751.7 MHz / 5-5-5-15 / 3.08 vdimm
http://i720.photobucket.com/albums/w...517MHzDICE.jpg
To see the pics and other results check out my thread:
DFI DK X48-T2RSB-Plus + D9 GMH + DICE
Your hate toward Gigabyte is unjustified :shakes: There are lots of people who get really good clocks from the UD3P, and come to think of it, many get good numbers from the P5Q series as well :yepp:
More fun with the UT P35 and these Team 8500 sticks. I still can't get the low voltage 32M stability others have, I'm not sure if it's my components or the temps in my computer room.
http://img20.imageshack.us/img20/861...5pl71mteam.jpg
Can you share some of your settings for 740 C5? Are you using the Memory OC profiles?Quote:
Originally Posted by Eeky NoX
hi everybody!
my gskill 8500HK (d9gmh) work great on the DFI BI P45 elite w/q9550!
strap333/800 PL auto:
http://i209.photobucket.com/albums/b...hk/ev10048.jpg
My 4x1GB Team Xtreem 8500 ( D9GMH ).,need at least 2.18v to pass 1Mb PI test.,is the volt save for 24/7 guys.?cool it with Corsair Airflow..
[IMG]http://i861.photobucket.com/albums/a...leina/1256.jpg[/IMG]
Well I've seen D9 sticks fail at 2.05v and some sticks that have worked fine for over a year at 2.3v... So it's difficult to say but after experiencing some early death for my D9GKX sticks twice on this Gigabyte P35 board I think it depends a lot on the motherboard too. :D
Currently running my backup CellShock DDR2-1000 CL5 D9GMH sticks at 2.29v until the others arrive from RMA to be able to run them at same settings my CellShock DDR2-1000 CL4 D9GKX was at 2.10~2.15v. I'm that person that can't satisfy myself with lower speeds than what I used to have and rather push the hardware a bit more instead. Have 2x80mm fans as cooling tho.
nothin new to me to lose good d9 on gigabut boardsQuote:
Originally Posted by RPGWiZaRD
i was averaging 1 set evert 4-5 weeks on gigabyte p35
Have posted this while ago on this thread maybe.
Some more MIIF tribute: http://valid.canardpc.com/show_oc.php?id=530225
1x Transcend aXeram 1200mhz+ @ 700mhz 5-4-4-4 @ 3.2 V
Who cares about low voltage stability anyway?! :p:Quote:
Originally Posted by Shiranui Gen-An
Nice going on the DFI, though I still can't believe you couldn't get past 600MHz on the UD3P...
Which PL were you running in your last result?
I think it was PL7 with 444FSB on the 266/800 divider.Quote:
Originally Posted by Don_Dan
Thanks for the reply!Quote:
Originally Posted by Shiranui Gen-An
Did you test how high you can run the FSB with PL7? P35 chipsets are usually able to run PL a tad lower than P45 at the same FSB frequency, that's why this could be quite interesting for generating bandwidth.
If you set drive strengths down they don't die...Quote:
Originally Posted by zsamz_
At last got my ballistix tracers 1066 workings as I wanted to, 2.14v:
http://img36.imageshack.us/img36/4189/60055515214.jpg
you dont know what you talkin aboutQuote:
Originally Posted by BeepBeep2
no options for drive strength in p35
pos memory voltage regulators on gigabut p35
Cell Shock 1000MHz CL4 @ 1120MHz 4-4-4-4 with 2.3V on Gigabyte EP45-Extreme, but I don't know if stable
http://valid.canardpc.com/show_oc.php?id=660951
Same tracers as few post earlier, same voltage [2.14] - imo gg mem.
http://img31.imageshack.us/img31/641...515214linx.jpg
THE BEST MICRON I EVER SEE AND HAVE :up:
FSB 1280 CL 5/5/5/15 v 2.14
http://i28.tinypic.com/15i59wi.jpg
good ram and awesome moboQuote:
Originally Posted by Blue Storm
ep45 extreme is the best mobo for ram clocking, with cellshock on it you must do at least 1200mhz cas4 :D
Gaul what sticks?
team extreem pc 8500, 2x1 GB kit :)Quote:
Originally Posted by kuebk
@ Everybody
Does anybody know where I can get [[ TEAM Xtreem with D9 ]] to germany ? :shrug:
Thanks
thanks alot,
think will get one :)
Before buying contact them asking is description correct.
Not much to worry about buying from MemoryC, especially Team Xtreem.
Having a bit of fun with my CellShock CS2221650 "Red Devil" kit and my Maximus Formula, I managed single SuperPi 32M stability@DDR2-1200 4-4-4-4 with 2.50v BIOS set (=2.56v DMM). Ignore the PC Probe II reading, it's a bit high.
http://img27.imageshack.us/img27/944...4pl532mcs2.jpg
{[ Before buying contact them asking is description correct. ]]
@ Kuebk:
too late, I already bought a kit, i hope i can reach something about 1400+:down:
My 1300C6 I got from them.:up:Quote:
Originally Posted by Shiranui Gen-An
PC2-9600-now cheaper 20 Euro
PC2-10400-now higher 7 Euro
PC2-10400,VDimm 2.38
http://www.yourpicbox.com/images/oEBIeDSoO9030.png
http://valid.canardpc.com/show_oc.php?id=659865
Afair new Goodrams Pro 2x1 can reach 700mhz easily, they are made of d9hcd.
Mind sharing your BIOS settings? For whatever reason I'm having great difficulty these days with my UD3P, maybe it prefers my E8400s over my E8500.Quote:
Originally Posted by stasio
Gigabyte GA-EP45-UD3P (Rev. 1.0) - F10eQuote:
Originally Posted by Shiranui Gen-An
*************************************
*************************************
******************************
MB Intelligent Tweaker(M.I.T.)
******************************
Robust Graphics Booster ..............: [Fast]
CPU Clock Ratio ......................: [10X]
x Fine CPU Clock Ratio................: +0.0
CPU Frequency ........................: 4.3GHz( 430x10)
********** Clock Chip Control ********
>>>>> Standard Clock Control
CPU Host Clock Control................: [Enabled]
x CPU Host Frequency(Mhz).............: [430]
PCI Express Frequency(Mhz)............: [101]
C.I.A.2...............................: [Disabled]
>>>>> Advanced Clock Control..........: [Press Enter]
CPU Clock Drive.......................: [800mV]
PCI Express Clock Drive...............: [900mV]
CPU Clock Skew........................: [ 0ps]
MCH Clock Skew........................: [ 0ps]
******** DRAM Performance Control ********
Performance Enhance...................: [Standard]
Extreme Memory Profile(X.M.P.)........: [Disabled]
(G)MCH Frequency Latch................: [Auto]
System Memory Multiplier (SPD)........: [3.00A]
Memory Frequency(Mhz).....800.........: 1290
DRAM Timing Selectable (SPD)..........: [Manual]
>>>>> Standard Timing Control
x CAS Latency Time................5...: [ 5]
x tRCD ...........................5...: [ 5]
x tRP.............................5...: [ 5]
x tRAS...........................18...: [15]
>>>>> Advanced Timing Control.........: [Press Enter]
x tRRD............................3...: [ Auto]
x tWTR............................3...: [ Auto]
x tWR.............................6...: [ Auto]
x tRFC...........................42...: [Auto]
x tRTP............................3...: [ Auto]
x Command Rate (CMD) .............0...: [ Auto]
>>>>> Channel A Timing Settings.......: [Press Enter]
x Static tRead Value.............7...: [ 7]
x tRD Phase0 Adjustment...........0...: Auto
x tRD Phase1 Adjustment...........0...: Auto
x tRD Phase2 Adjustment ..........0...: Auto
x tRD Phase3 Adjustment...........0...: Auto
x Trd2rd(Different Rank)..........6...: Auto
x Twr2wr(Different Rank)..........6...: Auto
x Twr2rd(Different Rank)..........5...: Auto
x Trd2wr(Same/Diff Rank)..........8...: Auto
x DIMM1 Clock Skew Control (ps).......: Auto
x DIMM2 Clock Skew Control (ps).......: Auto
x DDR Write Training..................: Auto
>>>>> Channel A Driving Settings......: [Press Enter]
x Driving Strength Profile............: [1300MHz]
x Data Driving Pull-Up Level..........: Auto
x Cmd Driving Pull-Up level...........: Auto
x Ctrl Driving Pull-Up Level..........: Auto
x Clk Driving Pull-Up Level...........: Auto
x Data Driving Pull-Down Level........: Auto
x Cmd Driving Pull-Down level.........: Auto
x Ctrl Driving Pull-Down Level........: Auto
x Clk Driving Pull-Down Level.........: Auto
>>>>> Channel B Timing Settings.......: [Press Enter]
x Static tRead Value.............7...: [ 7]
x tRD Phase0 Adjustment...........0...: Auto
x tRD Phase1 Adjustment...........0...: Auto
x tRD Phase2 Adjustment ..........0...: Auto
x tRD Phase3 Adjustment...........0...: Auto
x Trd2rd(Different Rank)..........6...: Auto
x Twr2wr(Different Rank)..........6...: Auto
x Twr2rd(Different Rank)..........5...: Auto
x Trd2wr(Same/Diff Rank)..........8...: Auto
x DIMM1 Clock Skew Control (ps).......: Auto
x DIMM2 Clock Skew Control (ps).......: Auto
x DDR Write Training..................: Auto
>>>>> Channel B Driving Settings......: [Press Enter]
x Driving Strength Profile............: [1300MHz]
x Data Driving Pull-Up Level..........: Auto
x Cmd Driving Pull-Up level...........: Auto
x Ctrl Driving Pull-Up Level..........: Auto
x Clk Driving Pull-Up Level...........: Auto
x Data Driving Pull-Down Level........: Auto
x Cmd Driving Pull-Down level.........: Auto
x Ctrl Driving Pull-Down Level........: Auto
x Clk Driving Pull-Down Level.........: Auto
****** Motherboard Voltage Control ******
Voltage Types..........Normal...........Current
-----------------------------------------------
>>> CPU
Load-Line Calibration.................: [Enabled]
CPU Vcore..............1.17500V.......: [1.2500V]
CPU Termination........1.200V.........: [1.220V]
CPU PLL................1.500V.........: [1.570V]
CPU Reference..........0.760V.........: [Auto]
>>> MCH/ICH
MCH Core...............1.100V.........: [1.240V]
MCH Reference..........0.760V.........: [Auto]
MCH/DRAM Reference.....0.900V.........: [Auto]
ICH I/O................1.500V.........: [Auto]
ICH Core...............1.100V.........: [Auto]
>>> DRAM
DRAM Voltage...........1.800V.........: [2.420V]
DRAM Termination.......0.900V.........: [Auto]
Channel A Reference....0.900V.........: [Auto]
Channel B Reference....0.900V.........: [Auto]
http://img139.imageshack.us/img139/9...0818044605.png
How about Crucial Lanfest D9GMH ? Is it worth buying?
Imo it's better to buy 1066 kits from crucial than 800.
Well, if you can get them for cheap, why not! Even Crucial's 5300s were good memory! :up:
I can get them for about 25 euros, i need 1250mhz so i think these mems fit there :)
That price is okay in my opinion, go for it and post some results!
These were to expensive, I'm not a rich person, and immediatly i bought a rampage extreme, IFX14 an BeQuiet DarkpowerPro 750 Modular for 200€, so my money has run out for the next two months,Quote:
Originally Posted by Shiranui Gen-An
i'm still going to school and have no work --> less money:down:
I would even say that some of them were better than 6400 kits.Quote:
Originally Posted by Don_Dan
Doesn't sound bad, I paid for mine 20usd. For such speed you will probably need around 2.4v [this is what my lanfest's wants to] to work at ~600mhz. And that's what I'm consider as pretty high voltage for 24/7 use.Quote:
Originally Posted by xacti
Firstly im not going to use this mem 24/7. We need it to get over 600fsb because atm kingston memory blocks us. it does only 1150MHz on 2.35v (real 2.37v).
If you want to I can check how high will they go.Quote:
Originally Posted by xacti
Sorry for spamming this thread, but I'm searching a RamPot for Overclocking the Ram with Dice or go LN2 and
how can I store in Dice ?
Need I an ICEBOX to store it ?
It should be available to germany and the price should be a bit ......:down:
:( school is going on again on Monday :(:(:(:(:shakes::shrug::down:
I've no idea where you can purchase a proper ram pot.
I store my dry ice in a thick walled polystyrene box, with a thick base and a thick lid. This is also placed in another polystyrene or cardboard box. I place broken panels of polystyrene on top of the dry ice in the box also to aid insulation.
aslanwas, PM Nanok for his RAMpot, he can build one for you.
thanks...I must learn all timing items because before I bought Cell Shock's I had Commando and there isn't many items on adjusting the timing and maybe I will get 1200MHz 4-4-4-4...with 5-5-5-5 I got 1330MHz, but 1335MHz wasn't stable with 2.5V:shrug:Quote:
Originally Posted by Mafio
the first memory kit has d9gmh? and the second? d9gkx?Quote:
Originally Posted by kuebk
these 2 kits have D9-GMH :)Quote:
Originally Posted by User111
I got the first one, and i think they have micron D9gmh chips, but mine don't do well, not Cl4 1000MHZ at 2.2V, even not booting, and 1200mhz even not with 2,3V, i think i didn't got the best one, but you can try your luck and get one, but from know on, i prefer only used DDR2 from eBay or anywhere else because they're cheap ( the most expensive one about 30€ ) and if they don't overclock well, you can sell them.Quote:
Originally Posted by User111
Hope could help you
But
still
go
Team Xtreem:up::up::up::up::up::up::up::D:D:D:D:D:D
Hi Guys,
I have a set of Corsair Dominator 8500C5D's (2x2gb) v2.2. I've looked at the IC's that are on the set, and all i can gather from the corsair forum is that they are Micron.Gdies.
What IC am i looking at here and what sort of clocks can i expect from them?
I'm reaching 1098mhz on my DFI DK-790FXB-M2RSH with a 940BE at 2.1v. I haven't really tried any other volts as i don't wanna kill em quicker.
Anything after 1098 i get multiple errors in winmemtest but everything else passes perfect! :(
OCCT Linpac test runs for approx 30 mins before i cancel it and no errors whereas memtest runs less than 2 mins and finds 2 errors.
I can get it posteable until 1200, and it gets into windows perfectly fine, until i run a bench then it dies (i'm actually guessing it's my IMC when this happens as it's running @ 2.75ghz.
Any help with what IC is on these sticks, and possibly with some timing/safe volts/speeds would be awsome!
Thanks guys! :)
Theses mems ics aren't microns.
hmmm, here´s from Corsairs forum, the DDR II IC Inquiry.
TWIN2X4096/CM2X2048-8500C5DF
........................XMS850X v1.1...PSC.C-Die.......128MX8
........................XMS850X v1.2...PSC.F-Die.......128MX8
........................XMS850X v2.1...Micron.E-DIE...128MX8
........................XMS850X v2.2...Micron.G-DIE...128MX8
........................XMS850X v3.1...Elpida.C-Die....128MX8
........................XMS850X v3.2...Elpida.F-Die....128MX8
As i said... they are micron g-dies (what ever the hell those are! :P)
I can't seem to get anything out of them! even setting 2.3v @ 1120 i get fails on OCCT linpac.
With the gigabyte board i had them running at 1160 @ 2.35v perfectly fine, just on this dfi board there are subtimings i cannot figure out for the life of me! :(
if any1 can help me out that'd be great!
Thanks
pumpin 2.35v in rev:G and you think you didnt damage them:eek:Quote:
Originally Posted by m0n4g3
but at 1066 is rock solid 100%?Quote:
Originally Posted by m0n4g3
do you have tried with memtest?
ok i figured out what the issue was.
I only pumped 2.35v through them for 5-10 mins to see if they would pass memtest (within less than a min they would error).
The issue was with subtiming (TWR and TWTR being too low).
I used memset to find some of the subtimings from SPD. I'm now able to pass memtest @ 1120 @ 2.2v with 5-5-5-15-4-22-8-4.
Thanks for the help though guys, i'm a much happier now that i can get 12kmb/s copy and 11kmb/s read! :)
Thanks guys! :)
What is a safe voltage for a g-die btw?
*Yes at 1066 it passes perfectly fine*
No more than 2.2v. 2.15v to be safe.
I have 3 crucial sets
1. tracers 1066 - 600 5-5-5-15 spi32m stable on 2.12v, but can't stabilize them under dos version of memtest even at 2.2v - any clues?
2. tracers 800 - 575 5-5-5-15 memtest stable on 2.2, can't make 600 even at 2.5v,
3. lanfest 800 - can't make 600 even at 2.5v, haven't tested lower frequencies.
Any clues guys?
Maybe NO LUCK :shrug::shrug::shrug::shakes::shrug::shrug::shrug:Quote:
Originally Posted by kuebk
Or the rams have a wall there t those frequencies, i've also a kit like this, its working but not Prime Stable even with more than 2.5V
BTW nice ram
That's what I don't get, how can 3 totally different sets of mem don't oc at least to 600 5-5-5-15.
Haven't got bigger problems with ocing promos to such frequencies but d9 is a nightmare. :(
Lets give us some info about your Board, maybe your board isn't the Overclocker, what about Northbridge Voltage ?
Rampage Formula as it says in the signature, I've tested up to 1.6v on mch.
Does ANYbody of you know, which ICs are under the first generation OCZ Flex XLC Edition CL3
http://p.gzhls.at/239656.jpg
thanks
Only the 1st Gen DDR2-1150 C5 Flex kits had D9GMH, I remember reading for sure that the 800 C3 kits were not Micron-based.Quote:
Originally Posted by aslanwas
http://img82.imageshack.us/img82/7893/pamitki.jpg
Tracer Ballistix, Handpicked D9GMH's
How about that? :D Only 2.1v
What do you think?
Nice tRAS.:)
nice results, keep pushing:up::up::up::up::up::up::up::clap::clap::cl ap::clap::clap: try 1300 with higher tRas and maybe at 2,25 -2.3VQuote:
Originally Posted by sheri
Thats DDR3 memory........Quote:
Originally Posted by KB24LA
Found this ones:
http://www.abload.de/thumb/2x1gbcell...2-8000ggvr.jpg
Could give voltage up to 3.0 volts under air but it didnt do anything.
Very nice rsults on AMD system, :up::up:
today i got my uses 4*1GB OCZ Flex XLC 1150, on single channel they boot up with 2,8V, but going to take them under cold ( I have to reach the 1600 before dieing :] ).
Got some nice Ram from OCZ here, Flex XLC 1150 Cl5,
here some CL4 testing,
Set up:
Q6600
P35 DS4
OCZ Flex XLC 1GB 1150
Excelstore 80GB
Jetway 8800gt
NoName Watercooler
Coolermaster M620
3* Xilence Redwing 1200rpm
here some Validations and Screenshots:
Vaildation @ 1278 Cl4 4-4-4-15 2,8V set, 2,84real
http://valid.canardpc.com/show_oc.php?id=782831
Screenshot 1260 Pi1m
http://img14.imageshack.us/img14/423...xlccl41260.jpg