The (short-lived) Sandy Bridge.
http://img809.imageshack.us/img809/5185/dscn0674v.jpg
http://img263.imageshack.us/img263/1692/dscn0678s.jpg
Printable View
The (short-lived) Sandy Bridge.
http://img809.imageshack.us/img809/5185/dscn0674v.jpg
http://img263.imageshack.us/img263/1692/dscn0678s.jpg
Little update...
i7 920 co@4ghz HT on
Venomous X push/pull
3x2go cas8 corsair dominator paint on RED
Ga ex58 ud3r rev1.6
Sli evga gtx570
lian li Pc A-71 F Modded
Corsair Ax 1200W
1x1to hitachi
1x1.5to seagate barracuda
http://img4.hostingpics.net/pics/48755301062011610.jpg
http://img4.hostingpics.net/pics/87162801062011608.jpg
http://img4.hostingpics.net/pics/21549202062011615.jpg
http://img4.hostingpics.net/pics/62842202062011619.jpg
http://img4.hostingpics.net/pics/87722102062011616.jpg
http://img4.hostingpics.net/pics/846...3032011165.jpg>>>>>http://img4.hostingpics.net/pics/87770602062011620.jpg
What chair is that ? Nice
here in BRazil its known as "office mesh 42c"
chinese made, imported...
http://img217.imageshack.us/img217/5434/dscn1671b.jpg
http://img193.imageshack.us/img193/7370/dscn1684p.jpg
http://img600.imageshack.us/img600/8199/dscn1690h.jpg
http://img402.imageshack.us/img402/3298/dscn1703f.jpg
http://img706.imageshack.us/img706/9825/dscn1720zw.jpg
http://img17.imageshack.us/img17/1089/dscn1722p.jpg
Looks a lot better in real life, and I absolutely LOVE those Xigmatek fans :D
miptzi: That is a very clean room. (wish mine was that clean)
I also like the Xigmatek fans. That color and/or white is now my favorite after getting tired of blue and red.
tanx
I like those xigmas too. Orange/white matches perfeclty, so diferent from any previous fans...
My personal one:
http://a5.sphotos.ak.fbcdn.net/hphot..._5073414_n.jpg
My current set up, the picture is month old and has Hyundai 19inch monitor, i just got my 27inch Asus LED monitor on friday so will take pictures later and update it as didn't get time to take new pictures and desk has been messy since than.
http://img339.imageshack.us/img339/610/img0118cx.th.jpghttp://img69.imageshack.us/img69/7677/img0120aw.th.jpg
full coverage
http://img857.imageshack.us/img857/8...c16016p.th.jpg http://img850.imageshack.us/img850/8587/sdc16013.th.jpg http://img195.imageshack.us/img195/246/sdc16012a.th.jpg http://img534.imageshack.us/img534/1...c16011v.th.jpg http://img716.imageshack.us/img716/8...c16010n.th.jpg http://img90.imageshack.us/img90/4448/sdc16009.th.jpg http://img151.imageshack.us/img151/5472/sdc16008.th.jpg
B&W Antec 300
http://i608.photobucket.com/albums/t...ynti/300_2.jpg
http://i608.photobucket.com/albums/t...ynti/300_3.jpg
http://i608.photobucket.com/albums/t...i/th_300_1.jpg http://i608.photobucket.com/albums/t...i/th_300_4.jpg http://i608.photobucket.com/albums/t...i/th_300_5.jpg
And another B&W build.. My mITX gaming rig :) LianLi Q07+Corsair H50.
Posted in the LC gallery allready, if thats a problem let me know and Ill edit them.
http://i608.photobucket.com/albums/tt166/laursi/071.jpg
http://i608.photobucket.com/albums/tt166/laursi/072.jpg
http://i608.photobucket.com/albums/t...rsi/th_074.jpg
Very nice Laursi, I like it.
Great miptzi... 50" :shocked::clap: :)Quote:
Originally Posted by miptzi
@laursi: guess we're both suckers for b&w builds :up:
tanx, We do wan we can lolQuote:
Originally Posted by hallaor
another carpet, center table and cleanup made
just woried about my next HT setup for the TV. I found some good ones really cheap, but my state is 220v, and ALL the good HT's are 120v.
good Energy conditioners cost an arm here..... don't know what to do....
http://img855.imageshack.us/img855/7823/sdc16024.th.jpg http://img832.imageshack.us/img832/7122/sdc16023.th.jpg http://img192.imageshack.us/img192/9...c16022r.th.jpg http://img59.imageshack.us/img59/7701/sdc16021y.th.jpg http://img577.imageshack.us/img577/9804/sdc16020.th.jpg http://img192.imageshack.us/img192/4...c16019l.th.jpg http://img703.imageshack.us/img703/2708/sdc16018.th.jpg http://img11.imageshack.us/img11/6836/sdc16017.th.jpg
Hi Guys, a little update from denmark. Here's my latest project, not done yet but soon.
http://farm3.static.flickr.com/2540/...121c83ea_z.jpg
G5_V1.8_04 by C4PPY, on Flickr
Just need the new hardware to come! :D
More pics here:
Have a Danish friend that wanted to do this... to his G5Quote:
Originally Posted by C4PPY
It took 2,5 hour, and i have one more PowerMac G5 i´m gonna do the same thing too. He's more the welcome to PM me :DQuote:
Originally Posted by davidkozat
Very nice! Its always great to see fellow G5 case modders out there...Quote:
Originally Posted by C4PPY
Attachment 116205
Thanks, your mod is one of the greatest G5´s in my book.Quote:
Originally Posted by autobot
I wholeheartedly agree with youQuote:
Originally Posted by C4PPY
@autobot
nice mod man, and what vga block is that?
Thanks for the compliments guys. ^_^
@hillywav: Its a DangerDen Maze5GPU. When I have a job again, I'm gonna do a full system update and probably replace the 6870 with a 6970 and get a Koolance full-cover waterblock.
Worklog
http://foro.noticias3d.com/vbulletin...d.php?t=338654
http://img683.imageshack.us/img683/5...7unreal.th.pnghttp://img688.imageshack.us/img688/2...7733o9e.th.jpghttp://img232.imageshack.us/img232/4...7552sha.th.jpghttp://img29.imageshack.us/img29/951...7458rk0.th.jpghttp://img689.imageshack.us/img689/8...iacopia.th.jpg
http://img651.imageshack.us/img651/6223/img6300l.th.jpghttp://img221.imageshack.us/img221/3682/img6294h.th.jpghttp://img707.imageshack.us/img707/5...743qosa.th.jpghttp://img98.imageshack.us/img98/464...757vtky.th.jpghttp://img695.imageshack.us/img695/4002/img5921w.th.jpg
http://img215.imageshack.us/img215/5051/img6235n.th.jpghttp://img832.imageshack.us/img832/9...727sse9.th.jpghttp://img4.imageshack.us/img4/507/img5740ntha.th.jpghttp://img268.imageshack.us/img268/7...741vtd8.th.jpghttp://img30.imageshack.us/img30/309...742xt65.th.jpg
http://img28.imageshack.us/img28/9717/img6289s.th.jpghttp://img836.imageshack.us/img836/6633/img6238v.th.jpghttp://img862.imageshack.us/img862/8575/img6237r.th.jpghttp://img109.imageshack.us/img109/5...g5053nf.th.jpghttp://img819.imageshack.us/img819/72/img5045u.th.jpg
Buena máquina! Qué caja es?
Translate: Nice rig! Which is the case?Quote:
Originally Posted by ballesss
It's a Silverstone TJ07.
http://www.shrani.si/f/12/aN/4fWH9SZg/dscn0249.jpg
http://www.shrani.si/f/47/bq/4gvXZ6Hp/dscn0242.jpg
http://www.shrani.si/f/r/4Y/11Y9qwmV/dscn0250.jpg
http://www.shrani.si/f/1a/cf/aKshD3B/dscn0252.jpg
http://www.shrani.si/f/1C/eR/4Ommfs1T/dscn0231.jpg
http://www.shrani.si/f/3U/kX/1xPlA4xN/dscn0197.jpg
Nice rig. I like my Corsair PSU's to be modular, so that's well done.
Bam! We have a winner!
Thanks! :) Yeah non-modular PSU's ad's same time to cable management but save's some money!:rofl: No siriusly there was quite a price difrence when i was buying it.Quote:
Originally Posted by audioave10
Now there's no that system no more, I had antifreeze spill witch MB and HDD's didn't take it good.:dammit: Now new system is on it's way, pictures in ~14day's.
That's got to be the cleanest water-cooling system I've ever seen! (plus the great sleeving job)Quote:
Originally Posted by disruptfam
That Lian Li is a monster! I like it.
Attachment 117058Attachment 117059
did some cable management on my fratical.
watercooling is on the way :D
That is one fantastic looking PC-V1000. One of my all time favourite cases out of the ones I've owned.
I'm finished with cable-management. My little system doesn't come close to filling up this large case.
http://i51.photobucket.com/albums/f3.../600Tfinal.jpg
Sweet. That case is gorgeous. :)
very Red...nice
and very cold :)Quote:
Originally Posted by audioave10
very, very nice cosmos, this carbon sticker is very expensive, but xigmatek fans has low quality bearing so in horizontal position are noisyQuote:
Originally Posted by Funkyhz
which rad is on the top of the case?
sexy!!!
you got a worklog?
my Antec 1200
http://img155.imageshack.us/img155/1020/78537599.jpg
http://img30.imageshack.us/img30/8624/30717138.jpg
http://img84.imageshack.us/img84/920/27803345.jpg
http://img94.imageshack.us/img94/309/18615689.jpg
http://img217.imageshack.us/img217/6758/94809494.jpg
http://img12.imageshack.us/img12/1957/35702745.jpg
Where did you get the mesh for covering the sides? Also how did you attached them?Quote:
up
this is really easy
up
this is really easy
It is powder-coated perforated aluminum sheet.Quote:
Originally Posted by Zgradis
The holes are 2 mm in diameter.
Spacing of 3.5 mm.
Measured spacing between the center of each of the holes.
More pics of the PM ... if you want.
Attachment 117448
nothing to fancy. does the job.
Damn I was hoping it was somewhere online I could buy it. I live downtown Chicago and getting someone to powder coat = not worth the time or money IMO. Just out of curiosity, how did you attach it to the case?
http://oi52.tinypic.com/2i9tsok.jpg
upgraded to 3-Way SLI GTX580 :)
new bench?
a beautiful work, congratulations! my friend!Quote:
Originally Posted by Tcassius
Thxxxx my friend!!Quote:
Originally Posted by LeandroJVarini
http://i1021.photobucket.com/albums/...llowMonkey.jpg
http://i1021.photobucket.com/albums/...lwrappedup.jpg
http://i1021.photobucket.com/albums/...-rightview.jpg
http://i1021.photobucket.com/albums/...waterblock.jpg
http://i1021.photobucket.com/albums/...outgfxcard.jpg
http://i1021.photobucket.com/albums/...r-leftview.jpg
elpibe10: very interesting layout for SFF
Xelation, what a beast dude, looks great. I want that ASUS card so bad.
Xelation - dude what mousepad is that? thats awesome!
Thx, sorry for my late reaction. It's from RatScar: http://www.ratscar.com/gaming/productsQuote:
Originally Posted by cubemaster27
Xelation...those white sleeved cables look great in that case!
my new PC-Z70,
all i need is another 580, before moving on WC.
if you wonder, the system is very cool & quiet.
Attachment 118127
Attachment 118128
Attachment 118129
Attachment 118130
Attachment 118131
I'm not into bending, twisting and hiding wires so forgive me pls...:)
My workstation and gaming rig...
http://img199.imageshack.us/img199/9392/pic2hq.jpg
http://img191.imageshack.us/img191/695/pic3yk.jpg
http://img29.imageshack.us/img29/9322/pic6vy.jpg
http://img812.imageshack.us/img812/4807/pic1cc.jpg
http://img811.imageshack.us/img811/3653/pic7x.jpg
Why so many optical"s ? Rip, burn?
Because I own many many many (u get the idea) boxed games and some if not most require disc sitting in the drive...(the more drives the less disc swapping)
Ever heard about Daemon Tools? Virtual drive works much faster and quieter than optical, and you can have pretty much unlimited amount of disk images on hdd these days (hdds are huge).
LMAO, that has to be one of the laziest things I've ever read. Not having a go, just made me laugh.Quote:
Originally Posted by solofly
Well there's some thing's that I could have done bether, like cables for DVD unit, cables in upper left coner..:D:idea:
http://www.shrani.si/t/38/AP/2O0xbvXh/1/dscn1290.jpg
http://www.shrani.si/t/2I/7n/4fnKTGSL/1/dscn1291.jpg
Liquid cooling has to sweat least like this..:hm::owned::cord:
http://www.shrani.si/t/3c/Je/76DTM8N/1/dscn1295.jpg
Uuuiiii! EKWB!:cool:
(only thing is, i need supreme HF):D
http://www.shrani.si/t/1L/lr/1ujmiGTw/1/dscn1296.jpg
http://www.shrani.si/t/1p/Yh/1Tj7Iggb/1/dscn1301.jpg
"ultra durable" ...we'r gonna see this...:fact:
http://www.shrani.si/t/3H/Jm/31U9FFtv/1/dscn1302.jpg
My supper-dupper mechanism for lifting RAD.:kissbutt::hrhr:
http://www.shrani.si/t/2S/Cp/3gZtPDdz/1/dscn1304.jpg
http://www.shrani.si/t/2a/vW/DUnCAQD/1/dscn1306.jpg
Doez it stand out that tube betwin water block's is too short?:eh:
So that's that. Well I'd like to know what you think, what would you change or any ideas for next time are appreciated.:up:;)
EDIT:typo dam**
great...Quote:
Originally Posted by Fredz77
can i have a rear photo of hdd cage and the rest?
i need to know if the cable management is great....
http://img717.imageshack.us/img717/1558/dsk1o.jpg
Occasional switchup.
http://img687.imageshack.us/img687/1034/dsk7.jpg
Sleeving and other stuff to do on the way!
http://img97.imageshack.us/img97/1526/dsk6.jpg
Here's a picture of the guts of my new build. The case is a Fractal Design Define R3 (Silver Arrow). This is the first PC I've built that I'm actually happy with the wire management job. After looking at some of the builds in this thread, I think I have a couple more ideas for how the wires could be managed.
Attachment 118893
lian li PC7 rocks
http://www.abload.de/img/lian7cb1.jpg
holy...I can't imagine how many LCD do you install on that rig this time :D
Duniek, that is such a clean build! What are you using that system for?
Btw, that HSF seems puny! It needs something higher end!
STRIKES BACKQuote:
Originally Posted by Duniek
http://omniserver.pl/duniek/kompy/HTPC1/stage2.jpg
Nicely done, Duniek! :toast: Like 'the cable free' look!:cool:
Asrock p67 Fatal1ty professional
intel core i5 2500k + thermalright venomous x (passive)
2x2gb corsair xms 1600mhz cl9
gtx 570 direct cu2
xfx 750W
wd 1TB
cooler master cosmos 1010 case "DARK RED PROJECT"
dell u2711h
http://img641.imageshack.us/img641/1126/img1635a.jpg
http://img26.imageshack.us/img26/301/img1643uj.jpg
http://img829.imageshack.us/img829/7659/img1636o.jpg
http://img708.imageshack.us/img708/7546/img1641sn.jpg
What's the cpu clock ? and what temps do you get while gaming with vx passive ?
i use standard cpu clock without oc, max temp was 65 C when cpu was load on 100% with prime95 but i have 5x enermax magma 120 and one enermax apollish so i have very good air flowQuote:
Originally Posted by Shimano
My case by Mviana
COSMOS BLACK RED
http://i855.photobucket.com/albums/a...BLACKteste9.jp
http://i855.photobucket.com/albums/a...BLACKteste.jpg
http://i855.photobucket.com/albums/a...ACKteste14.jpg
http://i855.photobucket.com/albums/a...LACKteste1.jpg
Memory Corsair chip elpida 2105Mhz 7-7-8-24
http://i855.photobucket.com/albums/a...osSatio998.jpg
Thanks punisher i was currious about the temps for vx fanless, they are ok for stock settings i got the same temps with 2x 1300rpm coolink fans but at 4.7ghz :)
Nice memery mario, rare ones, also nice sistem, i like the way you fitted the barbs into the tube :)
Please Remember:
4 image LIMIT
Do not quote images
Keep comments to the minimum - feel free to use the PM system to ask specific questions.
Thanks.
hey thx, the carbon was for my Grand Cherokee I sticked the rest in the case lollQuote:
Originally Posted by ThePunisher
do you have suggestion for high quality fan with white led?
The rad is from Magicool Extreme triple 120mm!
Quote:
Originally Posted by Funkyhz
you can buy phoba nano g without leds because it has holes in frame for leds and you can use white led, or you can buy enermax cluster and paint fan on black color, i painted enermax tb silence and it looks very nice
i have one question, on the top should fit black ice sr1 360 ? your rad has 4,5 cm, black ice has 6 cm
46mm exactly, the black ice 60mm is to big you cant put fan under!Quote:
Originally Posted by ThePunisher
lowfat, congrats! you are using ice dragon?
Yes.Quote:
Originally Posted by LeandroJVarini