Watercooling by Malik

Printable View

Show 100 post(s) from this thread on one page

06-29-2011, 06:36 AM
jacenty

Brilliant work, brilliant photographs. I am full of admiration for this what you did.
Pozdrowionka ;)
07-01-2011, 11:03 AM
static369

Excellent photography, and beautiful system... :up:
07-01-2011, 01:40 PM
Malik

Quote:

Originally Posted by RollerBall

Have you got a picture including the pump placement? I'm considering the case and doing it in a similar way to the TJ07. Not sure where I'd put the pump though as I'm planning on putting a quad + dual rad in the bottom with the PSU side mounted.

In this case can not be done like the TJ07. Since the amount of space at the bottom is small for such a system. The last photos without cover:

http://www.abload.de/img/_dsc0114o7y6.jpg

http://www.abload.de/img/_dsc0115d7o7.jpg

http://www.abload.de/img/_dsc0117279x.jpg

http://www.abload.de/img/_dsc0120u7c9.jpg

http://www.abload.de/img/_dsc0122574r.jpg

http://www.abload.de/img/_dsc0123u73l.jpg

http://www.abload.de/img/_dsc0128w7tt.jpg
07-01-2011, 02:17 PM
guilleguillaume

Malik on the last pic what is that lettering AquaComputer coming from?

I just started with a Nikon D90 and I guess you're using a tripod for making your photos. Can you recommend me the one you're using?

You don't have to askt the last question if you think it is too Off Topic :D
07-01-2011, 02:38 PM
Unrealer

1 Attachment(s)

Quote:

Originally Posted by guilleguillaume

Malik on the last pic what is that lettering AquaComputer coming from?

From the temp. sensor
http://www.aquatuning.es/product_inf...-aquaduct.html
07-01-2011, 02:47 PM
hyperuk

Quote:

Originally Posted by Malik

In this case can not be done like the TJ07. Since the amount of space at the bottom is small for such a system. The last photos without cover:

Snip

I have put a quad in the bottom of my Fractal Xl, it is possible with some dremmeling at the front and also you could fit a double rad as well in the bottom along with the PSU mounted sideways

http://www.xtremesystems.org/forums/...=1#post4892988
07-01-2011, 02:54 PM
Malik

Quote:

Originally Posted by guilleguillaume

Malik on the last pic what is that lettering AquaComputer coming from?

I just started with a Nikon D90 and I guess you're using a tripod for making your photos. Can you recommend me the one you're using?

You don't have to askt the last question if you think it is too Off Topic :D

I'm using a tripod Velbon Sherpa 600R :)

Quote:

Originally Posted by hyperuk

I have put a quad in the bottom of my Fractal Xl, it is possible with some dremmeling at the front and also you could fit a double rad as well in the bottom along with the PSU mounted sideways

http://www.xtremesystems.org/forums/...=1#post4892988

In that case, my mistake ;)
07-05-2011, 04:41 PM
martensch

Still looking perfect but somehow I did like the BTP sli connector a bit more... :D
07-06-2011, 02:26 PM
Malik

Everyone likes something different :D

Some Bitfenix cables photos:

https://lh6.googleusercontent.com/-M...w/_DSC0237.JPG

https://lh5.googleusercontent.com/-W...s/_DSC0229.JPG

https://lh6.googleusercontent.com/-2...Q/_DSC0184.JPG

Title of this photo: one love :)

https://lh4.googleusercontent.com/-z...I/_DSC0211.JPG
07-06-2011, 02:42 PM
theseeker

Malik,
Is the quality as good as MDPC sleeving?
07-06-2011, 10:42 PM
barfastic

the sleeve has a more cloth like feeling to it, rather than plastic. dont know if u understadn what i mean....

it feels like sleeve made out of sock material.

i like it. and prefer it over to normal/mdpc sleeve which feels like hard plastic. but unfortunately, the colour selection isnt too large.... yet.
07-07-2011, 01:14 AM
Malik

Quote:

Originally Posted by theseeker

Malik,
Is the quality as good as MDPC sleeving?

Both are very good. Depends what you like. For me personally Bitfenix is better because it drapes better housing and better looks.
07-11-2011, 08:48 PM
armartins

Malik now please explain how the hell did you manage to use PCI-E 1 and 3 alongside with the EK DUAL 3-slot Paralel Bridge? By what I recall it should link slots 1,2 and 4 just like a 3-way would do it! I simple don't understand how! And man... What a fantastic work! Congrats!
07-14-2011, 01:12 PM
Malik

Quote:

Originally Posted by armartins

Malik now please explain how the hell did you manage to use PCI-E 1 and 3 alongside with the EK DUAL 3-slot Paralel Bridge? By what I recall it should link slots 1,2 and 4 just like a 3-way would do it! I simple don't understand how! And man... What a fantastic work! Congrats!

To do this connection that you see in my project - I used this connector EKWB: LINK

It perfectly fits my SLI. I placed the card in slot 1 and 3

Some tests with new fan - Phobya Nano-G 14 Silent Waterproof:

http://www.abload.de/img/_dsc0299ocy2.jpg

http://www.abload.de/img/_dsc0303aflp.jpg

http://www.abload.de/img/_dsc0306ncis.jpg

http://www.abload.de/img/_dsc03226g16.jpg

http://www.abload.de/img/_dsc03380ira.jpg

http://www.abload.de/img/_dsc0515qimq.jpg

http://www.abload.de/img/_dsc0477a5cgn.jpg

http://www.abload.de/img/_dsc0511pfml.jpg

http://www.abload.de/img/_dsc04801hyf.jpg

http://www.abload.de/img/_dsc04583grl.jpg
07-23-2011, 11:11 AM
tolman

When you get a chance could you please take a picture of the front of the case, inside and out? I'm curious on how you did the tubing there, as well as the HDD mounting (if it's not external as well).

Thanks

edit: I found pictures on page 72 regarding the front of the case. Nevermind!

Still curious about the HDD's however. I assume they are external as well?

2nd edit: Is this the correct flow sequence?

Res -> pump -> 240 rad -> 360 rad -> mobo -> ram -> cpu -> gpu(s) -> res
07-24-2011, 06:38 AM
LLiH

What reservoir is that?
07-24-2011, 06:45 AM
Malik

Quote:

Originally Posted by tolman

When you get a chance could you please take a picture of the front of the case, inside and out? I'm curious on how you did the tubing there, as well as the HDD mounting (if it's not external as well).

Thanks

edit: I found pictures on page 72 regarding the front of the case. Nevermind!

Still curious about the HDD's however. I assume they are external as well?

2nd edit: Is this the correct flow sequence?

Res -> pump -> 240 rad -> 360 rad -> mobo -> ram -> cpu -> gpu(s) -> res

HDD is inside, i put him on Scythe Himuro. He is between psu and front rad.

https://lh3.googleusercontent.com/-_...0/_DSC0362.JPG

About flow - yes this is correct.

Quote:

Originally Posted by LLiH

What reservoir is that?

This is EKWB 250ml res.
07-24-2011, 07:55 AM
RollerBall

What size tubing and compressions is that? It doesn't look like 1/2" ID tubes as the compresssions don't look "chunky" like they do normally with 1/2" ID. If it isn't 1/2" ID do you take a performance hit by going with smaller tubes to get that look?

One last question (interested in bitfenix cables) is how do you attach them? Are they extensions that stick onto the end of your cables? Or do they fit straight into the modular connectors/have to solder them in yourself?
07-24-2011, 08:12 AM
Malik

Quote:

Originally Posted by RollerBall

What size tubing and compressions is that? It doesn't look like 1/2" ID tubes as the compresssions don't look "chunky" like they do normally with 1/2" ID. If it isn't 1/2" ID do you take a performance hit by going with smaller tubes to get that look?

One last question (interested in bitfenix cables) is how do you attach them? Are they extensions that stick onto the end of your cables? Or do they fit straight into the modular connectors/have to solder them in yourself?

Im using Bitspower 11/16 fittings ( Matt Black BP-MBCPF-CC6 ), and tygon tubes R3603 9.5x15.9 mm.

About Bitfenix cables: they are stick onto the end of psu cables ;)
07-25-2011, 08:07 PM
tolman

Thanks for the reply, love this build, looks beautiful.

One more question if you don't mind. This is a big inspiration for an upcoming build of mine however I have an 800d already which I was going to begin to cut up. I was wondering how much, if any, did removing the divider from the case compromise the strength of the motherboard tray there, especially with everything installed on it?

I'm not sure if the divider in the Fractal supported the mobo tray at all or if it was there just for the visual aspect to separate the "zones"

Thanks again.
07-25-2011, 08:25 PM
Kayin

It does give it a fair bit of flex. The divider is riveted both to the case frame and the motherboard tray. (I removed mine as well.)
07-25-2011, 08:31 PM
Utnorris

What fluid are you using? It looks very nice, perfect color. Can you also post a for pics of the cable ends where the wire goes into the housing? IIRC they do not have heatshink showing do they?
07-25-2011, 09:10 PM
tolman

Quote:

Originally Posted by Kayin

It does give it a fair bit of flex. The divider is riveted both to the case frame and the motherboard tray. (I removed mine as well.)

Thanks. Are you talking about the 800D or the Fractal, though? It looks to me that the 800D would be pretty flimsy but I'm not entirely sure. I might just have to go ahead and do it and if it does take away from the overall structure I'll have to find away to re-support it or just re-install it and cut it.
07-27-2011, 06:22 AM
Malik

Quote:

Originally Posted by Utnorris

What fluid are you using? It looks very nice, perfect color. Can you also post a for pics of the cable ends where the wire goes into the housing? IIRC they do not have heatshink showing do they?

This is FESER ONE UV RED

Some no LC update:

http://www.abload.de/img/_dsc0676luwi.jpg

http://www.abload.de/img/_dsc0689ruuc.jpg

http://www.abload.de/img/_dsc0705zult.jpg

http://www.abload.de/img/_dsc0627luu5.jpg

http://www.abload.de/img/_dsc06336uzq.jpg

http://www.abload.de/img/_dsc0712puns.jpg
07-27-2011, 05:18 PM
RollerBall

Quote:

Originally Posted by Malik

Im using Bitspower 11/16 fittings ( Matt Black BP-MBCPF-CC6 ), and tygon tubes R3603 9.5x15.9 mm.

About Bitfenix cables: they are stick onto the end of psu cables ;)

So that's 7/16" tubes and fittings, right?
07-27-2011, 11:33 PM
aerial

Great work as always, but I'm missing one simple shot of the case, like this:

http://www.hardwaresphere.com/wp-con...e-sideview.jpg

No fancy angles, entire rig in one picture.
07-28-2011, 01:48 PM
Malik

Quote:

Originally Posted by aerial

Great work as always, but I'm missing one simple shot of the case, like this: PHOTO

No fancy angles, entire rig in one picture.

Here you have no fancy photo:

http://www.abload.de/img/_dsc07979umb.jpg
07-28-2011, 02:12 PM
pociej

Pump simply hangs on a piece of tubing?
I'd be afraid with my Tygon 3/8" 5/8" on Bits 3/8" 5/8"

Only holders keep rez and pump?
07-28-2011, 02:26 PM
eXa

Quote:

Originally Posted by pociej

Pump simply hangs on a piece of tubing?
I'd be afraid with my Tygon 3/8" 5/8" on Bits 3/8" 5/8"

Only holders keep rez and pump?

Ive had my pump AND EK400 ress hanging of a piece of tubing without a problem. And i dont even use compression fittings....
07-28-2011, 02:38 PM
Malik

Two stock EKWB holders
07-28-2011, 08:20 PM
sanctified

Nice work, as usual! Can't wait to see the next set of photos (:
07-30-2011, 08:50 PM
disruptfam

Great build.

STX is nice addition.. i quite enjoy mine.
07-31-2011, 09:35 AM
Malik

I think the same... stx looks awesome and played awesome :)

Today I had an attack of fear from ...

http://www.abload.de/img/logo_aquatuning_polskaxwzt.jpg

http://www.abload.de/img/phobyalogogdxb.jpg

Two type of fans:

1. Phobya G-Silent 14 1100rpm Red LED
2. Phobya Nano-G 14 Silent Waterproof 1000rpm

http://www.abload.de/img/_dsc08062pcu.jpg

http://www.abload.de/img/_dsc08163qam.jpg

http://www.abload.de/img/_dsc0820wr60.jpg

http://www.abload.de/img/_dsc0821iopq.jpg

http://www.abload.de/img/_dsc0836josq.jpg

http://www.abload.de/img/_dsc0842tom1.jpg

http://www.abload.de/img/_dsc08431q43.jpg

http://www.abload.de/img/_dsc0854pqlo.jpg

http://www.abload.de/img/_dsc0857yqiy.jpg

http://www.abload.de/img/_dsc0807qr59.jpg

http://www.abload.de/img/_dsc0812zo4g.jpg

http://www.abload.de/img/_dsc0808dp67.jpg

http://www.abload.de/img/_dsc0815br0y.jpg

http://www.abload.de/img/_dsc08665rvv.jpg
07-31-2011, 10:03 AM
shortstop69

Love it! That case is amazing. Big fan of fractal design! Any chance you could take a pic in the dark with the new LED fans?
07-31-2011, 01:27 PM
Malik

By night - quick shot:

http://www.abload.de/img/_dsc0950o7pl.jpg
08-30-2011, 10:24 AM
Awers

Nice...every Malik LC Project look's amaizing...keep the good work as always. Great photo's too
08-30-2011, 10:44 AM
Erklat

You made wonders with that relatively small case - P193 right?

How do those Phobya fans compare to most favored selection here (AP15)? You have a great camera too if I may observe? Did you intervene with colour saturation to your pics?
09-12-2011, 01:53 PM
Akilla

You inspired me to join this forum...

...and finally convinced me to buy the Fractal Define XL case! :clap: All the components are sitting here and I will get down to business at the weekend.

One question: could you share that technical drawing you used to cut out the radiator hole? I mean the one that you can see on the screen in this post: http://www.xtremesystems.org/forums/...=1#post4769105

That would be helpful and really speed things up for me at the weekend, especially because it is the first time I will use a dremel on a PC case... and on such a pretty one indeed! :D

Btw: the mesh that you used was Radgard from Bitspower, right?
09-17-2011, 07:34 AM
Akilla

Hey Malik, I'd really need that drawing which indicates the exact dimensions of the 420 radiator grill. Hope you're stopping by sometime soon...

Edited: Hmm... Found a post of yours over at overclockers.com.au saying that you didn't manage to mount the Bitspower Rad with the radiator you used (it was MagiCool Slim 420 right?) since the holes don't coincide. Too bad, I was planning to combine the two. Will not get around trying til next week, I'll report back whether it was a fit or not.
09-18-2011, 10:23 AM
nickbaldwin86

This build just gets better and better.
12-28-2011, 05:29 AM
barfastic

Malik, what flow rate are you getting right now? is the single 355 enough to go through all those blocks?
12-30-2011, 03:59 PM
Malik

On 100% pump power i have 221 l/h ;)
01-08-2012, 02:51 PM
bundymania

Those red phobya fans fit very good in this pc :)
01-30-2013, 01:44 PM
Malik

I'm baaack with new project ...

project ARC

http://epicstore.com.au/admins-epic-...KWB-Banner.jpg

Objective: Create a simple, aesthetic and efficient project.

What i will use:

Parts:

1. EK Water Blocks EK-Supremacy - Full Nickel
2. EK-FC 570/580 DCII - Acetal+EN (Nickel) with Backplate
3. EK Water Blocks EK-CoolStream RAD XT 240
3. EK Water Blocks EK-CoolStream RAD XTC 280
4. EK Water Blocks EK-RAM Dominator X4 - Acetal+Nickel CSQ
5. EK Water Blocks EK-FB ASUS Max4 Extreme - Acetal+EN (Nickel)
6. EK Water Blocks EK-DDC X-RES 100 CSQ - Acetal
7. EK Water Blocks fittings 12/16 G1/4 black
8. EK Water Blocks fittings CSQ 45 degree
9. EK Water Blocks fittings CSQ 90 degree
10. EK-RAM Dominator Module - Black
11. EK Water Blocks EK-UNI Holder 50/70
12. EK Water Blocks EK-UNI Holder D5
13. EK Water Blocks EK-UNI Holder DDC ADD-ON

Other parts:

1. Tygon 3603 11.1/15.9mm
2. Aqua-Computer Red liquid
3. Corsair AF 120mm oraz 140mm fans
4. Aquaero 5 XT

http://www.abload.de/img/_dsc0005snjbe.jpg

Stay tuned...
01-30-2013, 02:09 PM
Nobundu

Looking forward to see some beautiful pictures from your work Malik!

PS: Especially from that nice Fractal Chassis.
01-30-2013, 02:15 PM
pociej

Your break wasn't too long :]

On which case you will work?
01-30-2013, 02:15 PM
Malik

Fractal Design Arc Midi
01-30-2013, 03:08 PM
mattlef

You sir, Inspire me.

I cant wait to see what you do next. Plus your photography is on point. Amazing.
02-01-2013, 04:01 PM
Elder

Finally, I'm glad that we'll see the next perfect LC (why again EK?)
Do not make us wait too long :D
02-03-2013, 10:08 AM
kwscore

ohhh boy
02-07-2013, 12:42 PM
Awers

Can't wait to see new rig !
02-07-2013, 01:19 PM
Malik

Some tests how that looks inside:

http://www.abload.de/img/_dsc0062idueb.jpg

http://www.abload.de/img/_dsc0069yquxb.jpg

http://www.abload.de/img/_dsc006715uzu.jpg

http://www.abload.de/img/_dsc0190iuu55.jpg

http://www.abload.de/img/_dsc0197u5uu6.jpg

http://www.abload.de/img/_dsc02069muln.jpg

http://www.abload.de/img/_dsc0071r3uk4.jpg

http://www.abload.de/img/_dsc0089geufe.jpg

http://www.abload.de/img/_dsc0138q4uqg.jpg
02-07-2013, 01:48 PM
hyperdoggy

Whoa those EK rotary looks hot in those picture, nice job as always Malik.
02-07-2013, 04:23 PM
ohms

Quote:

Originally Posted by hyperdoggy

Whoa those EK rotary looks hot in those picture, nice job as always Malik.

Nice job Malik!

As for the new EK fittings, they look sweet, now let's hope that they don't leak like their previous dual and triple rotary fittings.
02-11-2013, 01:26 AM
Johnny87au

wow malik where did u get the EK fittings and the orange coloured sleeving looks gorgeous ?
02-11-2013, 04:11 AM
Prozium

Very nice so far.
02-14-2013, 03:31 PM
Malik

new equipment arrived :) Some photo shots:

http://www.abload.de/img/_dsc0310zxu3y.jpg

http://www.abload.de/img/_dsc0315diuir.jpg

http://www.abload.de/img/_dsc03187kuca.jpg

Ram and gpu ready so now its time for front radiator:

http://www.abload.de/img/_dsc036603iii.jpg

http://www.abload.de/img/_dsc0387amqrh.jpg

http://www.abload.de/img/_dsc0390hep1j.jpg

http://www.abload.de/img/_dsc03984ropp.jpg

Next step: custom plate for pump
02-17-2013, 02:29 AM
Edited

Looks fantastic! The EK angled adapters look awesome!
02-17-2013, 10:13 AM
Malik

Thanks, this new fittings are great :)
03-06-2013, 08:04 AM
Phaseshift

We want an update!!!
03-06-2013, 10:58 AM
Malik

Waiting still for packages :( Maybe on this weekend i show something new ;)

Stage I - tubes:

http://www.abload.de/img/_dsc060985syf.jpg

http://www.abload.de/img/_dsc0632jssto.jpg
03-15-2013, 03:12 PM
Anemic

Work of art
03-17-2013, 01:31 AM
aeMaeTH

w8ing for the worklog photos..:rofl:
03-17-2013, 06:40 AM
Phaseshift

Quote:

Originally Posted by Malik

Waiting still for packages :( Maybe on this weekend i show something new ;)

Stage I - tubes:

http://www.abload.de/img/_dsc060985syf.jpg

http://www.abload.de/img/_dsc0632jssto.jpg

What size/type tubing do you use Malik?

How did you mount that reservoir/pump combo?
03-17-2013, 03:39 PM
Malik

Quote:

Originally Posted by Phaseshift

What size/type tubing do you use Malik?

How did you mount that reservoir/pump combo?

1. TYGON R3603 11.1x15.9 mm
2. I create... EK robo :)

http://www.abload.de/img/dsc00374nlkt0.jpg

Its working :)

http://www.abload.de/img/_dsc0808smyk3.jpg

http://www.abload.de/img/_dsc0797xtzeb.jpg

http://www.abload.de/img/_dsc0805sayrn.jpg

http://www.abload.de/img/_dsc0802drlhl.jpg

http://www.abload.de/img/_dsc0769t1liw.jpg
03-17-2013, 04:38 PM
Phaseshift

Its beautiful great work once again Malik!
03-18-2013, 01:44 AM
h20xide

Always wondered what tubing do you use? Tygon?
03-18-2013, 02:00 AM
Malik

Quote:

Originally Posted by h20xide

Always wondered what tubing do you use? Tygon?

Always :)
03-18-2013, 02:03 AM
h20xide

Quote:

Originally Posted by Malik

Always :)

Which tygon please?
03-18-2013, 02:13 AM
Malik

Quote:

Originally Posted by h20xide

Which tygon please?

post: 1958

Still waiting for package with stuff but for now... some new photos:

http://www.abload.de/img/_dsc0820rayk6.jpg

http://www.abload.de/img/_dsc08313hbgd.jpg

http://www.abload.de/img/_dsc0828zpz85.jpg

http://www.abload.de/img/_dsc0833boxhk.jpg

http://www.abload.de/img/_dsc0834y3lvj.jpg
03-18-2013, 09:00 AM
kroks

tygon is nice at first but in a few month they will cloud.. :(
nice rig as always ^^
03-18-2013, 09:22 AM
Malik

Quote:

Originally Posted by kroks

tygon is nice at first but in a few month they will cloud.. :(
nice rig as always ^^

I never had problems with that. I think that depends which liquid you used.
03-19-2013, 08:26 AM
bono2099

Quote:

Originally Posted by Malik

I never had problems with that. I think that depends which liquid you used.

Beautfil work Malik, as usual. Your work motivates me to keep on improving my current and future builds.
As for tubing, I was about to ask if you had issues with staining, since mine (Tygon 3603) alway stained after few weeks using Feser UV blue or red liquid coolant. I don't bother cleaning them, I just replace them with new ones. I know they are expensive considering other tubing brands but it saves me time and less system downtime :/ Not sure if using vinegar + distilled water would help remove the stains...
03-20-2013, 06:53 AM
Malik

Try Aqua-Computer liquid. I never had problem with this product.

Some new photos:

http://www.abload.de/img/_dsc0846exyic.jpg

http://www.abload.de/img/_dsc0855oxz64.jpg

http://www.abload.de/img/_dsc087258yki.jpg

http://www.abload.de/img/_dsc0875kjxjl.jpg

http://www.abload.de/img/_dsc0876h9y37.jpg

http://www.abload.de/img/_dsc08825da7i.jpg

http://www.abload.de/img/_dsc0883ltaoi.jpg

http://www.abload.de/img/_dsc0885w9l6p.jpg
03-21-2013, 01:19 PM
Phaseshift

Malik, where's the second tubing for the radiator up top? I only see one :(? And where do you order your water cooling parts?
03-21-2013, 01:58 PM
Malik

Quote:

Originally Posted by Phaseshift

Malik, where's the second tubing for the radiator up top? I only see one :(? And where do you order your water cooling parts?

Ha this is master skill :) I will show you this ... tomorrow ;)
03-22-2013, 06:50 AM
bmxtom

Great work as always Malik! :clap:

@ Phaseshift
You could see the 90deg angled adapter and the tubing behind the radiator in post #1967 2nd picture ;)
03-22-2013, 11:58 AM
Awers

Quote:

Originally Posted by Phaseshift

Malik, where's the second tubing for the radiator up top? I only see one :(? And where do you order your water cooling parts?

There are two tubing's, but one has .... Take a good look and you find interesting detail on the . Just like the bmxtom wrote :).
03-22-2013, 03:36 PM
Malik

Here you have Phaseshift:

http://www.abload.de/img/dsc0041854j1m.jpg

http://www.abload.de/img/dsc00422mokpf.jpg

http://www.abload.de/img/_dsc0891zfkwi.jpg

http://www.abload.de/img/_dsc0897cmkjd.jpg

http://www.abload.de/img/_dsc0899i2jai.jpg
03-24-2013, 04:53 AM
Phaseshift

nice Malik thanks for that; and where do you order your wc parts?
03-24-2013, 04:56 AM
Malik

Quote:

Originally Posted by Phaseshift

nice Malik thanks for that; and where do you order your wc parts?

Directly from EKWB ... big thanks for Niko ;)
03-27-2013, 07:10 AM
fuzelogic

I noticed that you change out the liquid colors often to do different photoshoots......Do you take apart EVERYTHING each time you change the color?

I was also curious how long it takes you to do this whole process now because you do it frequently.... Thanks for info!
04-05-2013, 03:15 PM
matt220

Quote:

Originally Posted by Malik

I never had problems with that. I think that depends which liquid you used.

I know in the past you used Feser, what liquid are you running now?
04-06-2013, 01:47 AM
Malik

fuzelogic: that is the same liquid. But in different lights :)

matt220: Aquacomputer Double Protect Ultra 1000ml RED
04-20-2013, 08:16 PM
Randy Jeppesen

Hi Malik,

I enjoyed reading this thread. You have inspired me to build a system! I have some questions regarding fan control and pump control.

1. Do you use Aquaero to control all your fans? If so, how do you link your fans and how many channels do you use?
2. Does Aquaero voltage control your pump?
3. Do you use Aquaero to do anthing else (LED etc).

It would be awesome if you could explain your Aquaero setup!

One other question, have you ever considered using Swiftech MCP 655-PWM-DRIVE Pump? I saw a MCP 655 on one of your earlier builds but I don't think it was the PWM version.

Thanks again for all your fantastic work. Looking forward to your next project!
04-21-2013, 11:54 PM
Malik

Quote:

Originally Posted by Randy Jeppesen

Hi Malik,

I enjoyed reading this thread. You have inspired me to build a system! I have some questions regarding fan control and pump control.

1. Do you use Aquaero to control all your fans? If so, how do you link your fans and how many channels do you use?
2. Does Aquaero voltage control your pump?
3. Do you use Aquaero to do anthing else (LED etc).

It would be awesome if you could explain your Aquaero setup!

One other question, have you ever considered using Swiftech MCP 655-PWM-DRIVE Pump? I saw a MCP 655 on one of your earlier builds but I don't think it was the PWM version.

Thanks again for all your fantastic work. Looking forward to your next project!

1. Yes, i used all channels. There was 2-3 fans per channel
2. No, PowerAdjust which was connected to Aquaero 5
3. No

That was old project where i used MCP 655 ( not pwm version ). I think that mcp35 series is strong enough to this what im doing ;)

Next project is in progress... still waiting for some pacakges and decisions :)

In mean time:

http://abload.de/img/_dsc1551bqjqr.jpg

http://abload.de/img/_dsc1596zok6f.jpg
04-22-2013, 11:27 AM
Elder

YES ... hungry for new challenges, I like it :)
04-22-2013, 02:50 PM
Church

Lovely logo @AE5 :)
04-26-2013, 01:51 PM
Malik

http://abload.de/img/_dsc1674hyyc9.jpg

http://abload.de/img/_dsc16760jb5d.jpg

http://abload.de/img/_dsc1706gbbvz.jpg

http://abload.de/img/_dsc1713a7zug.jpg

http://abload.de/img/_dsc17179dys4.jpg

http://abload.de/img/_dsc1718yaajw.jpg
04-27-2013, 05:14 AM
Elder

Now it's time to miniITX LC...yum yum :D
04-27-2013, 10:29 AM
Malik

Stage 1: AC
Stage 2: LC
04-28-2013, 02:58 AM
Brodholm

Looking really good! :up:
04-28-2013, 09:34 AM
Malik

Some new photos ... still waiting for other parts:

http://abload.de/img/_dsc1788bqkhu.jpg

http://abload.de/img/_dsc1793mukeu.jpg

http://abload.de/img/_dsc1797vikd6.jpg
05-09-2013, 04:55 AM
Randy Jeppesen

Are you using glue instead of heat shrink on those cables?
05-09-2013, 01:26 PM
Malik

nope
05-09-2013, 05:23 PM
Randy Jeppesen

Secrets!

They look super clean. Love them!
05-18-2013, 07:17 AM
Malik

Stage Two:

http://abload.de/img/_dsc2113gqqjw.jpg
05-19-2013, 06:51 AM
Phaseshift

Hey malik those blue extension cables, are they bitfenix alchemy?
05-19-2013, 01:05 PM
Malik

Yes, this are bitfenix alchemy cables ;)

So teaser photos:

http://abload.de/img/_dsc2145v2aem.jpg

http://abload.de/img/_dsc2154q7l7j.jpg

http://abload.de/img/_dsc2157ivyi4.jpg

http://abload.de/img/_dsc2166unxed.jpg

http://abload.de/img/_dsc2169wpliv.jpg

http://abload.de/img/_dsc2182-edita3a86.jpg
05-20-2013, 06:58 AM
Phaseshift

Quote:

Originally Posted by Malik

1. TYGON R3603 11.1x15.9 mm
2. I create... EK robo :)

http://www.abload.de/img/dsc00374nlkt0.jpg

Its working :)

http://www.abload.de/img/_dsc0808smyk3.jpg

http://www.abload.de/img/_dsc0797xtzeb.jpg

http://www.abload.de/img/_dsc0805sayrn.jpg

http://www.abload.de/img/_dsc0802drlhl.jpg

http://www.abload.de/img/_dsc0769t1liw.jpg

How are your fans setup in terms of exhaust/intake for both radiators and the back 140mm?

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 11:05 AM.

XtremeSystems