Hehehe, how about 250x12 @ default vcore? :DQuote:
Originally Posted by vapb400
http://img150.echo.cx/img150/571/3gdefaultv7gt.jpg
Printable View
Hehehe, how about 250x12 @ default vcore? :DQuote:
Originally Posted by vapb400
http://img150.echo.cx/img150/571/3gdefaultv7gt.jpg
Best I can do with my new 3000+
Venice 3000+ on DFI Ultra D, BIOS 414-3
512 MB G.Skill 4400 LE
ADA3000DAA4BP
CBBLE 0512DPBW
This is a week 12 2005 chip
E rev AMD64 (Venice)
http://homepage.ntlworld.com/james.w...lipboard07.jpg
That's on a very good watercooling setup (NexXxos XP, 4.5 lpm flowrate, 26 feet head pressure, huge radiator = 0.12 C/W on CPU).
Just getting started with this 3200 from monarch, arrived Tuesday. LLBLE 0516 EPGW 2450 at default volt core. Pretty happy so far. My CBBID winnie needs 1.65v to get here. Will post max when I get there.
Max stable at default v-core looks to be 2550. Can boot into windows at 2.6, but can't pass even 1m of super-pi. Right now at 270x10@1.5v :D Running 32m pass right now. Looking for a little more stability then just 1m. If it passes, maybe I might make it to 2.8 :banana: :banana: :banana:
EDIT: Here is 32m pass 10x270. Had to up divider (245 is right at the edge for this ram, one stick of twinmoss in sig died) and add a little more voltage. Will shoot for 2.8 tomorrow.
EDIT 2: 10x270@1.58v prime stable about 3 hours, still running. Temp still hasn't reached 40. Using XP-90 and panaflo fan. My winnie with same cooling, would reach 48-49 at about the same voltage.
I played around with DI a few days ago but I think my mobo held me back as I was using the NEO2. 3D Mark over 300HTT is a no-go. Max superpi was 3Ghz and max screenshot 3.2Ghz.
http://img.photobucket.com/albums/v6...GhzSuperPi.jpg
http://img.photobucket.com/albums/v6...ce/3200Mhz.jpg
1.33V 10*270 CL2.5-3-3-8 2.7G PRIME95....
S/N#Z634606D51xxx
OC system :
- DFI lp ut nforce4 ultra-d --> stock bios 1/25
- AMD A64 3000+ Venice CBBLE 0512DPBW
- OCZ powerstream 520W
- 2x512MB twinmoss 'UTT'
- HIS X800XL iceqII
- H²O cooled -> Cathar G4 + DD heatercore + Laing D4 + 1/2" clearflex
Results :
- max HTT --> 445 HTT
- MAX FSB --> 243FSB/cas2 2 2 8 @ 3.2Vdimm / 10 passes test#5 . I'm having trouble getting higher even with extra Vdimm . Its most likely bios related as i'm still on stock bios . But the rest is working without one glitch and knowing DFI its better to leave it alone then ;-) (for now)
- 2500mhz : 277x9@1.4Vcore (166divider op DDR)
- 2600mhz : 289x9@1.4Vcore (166divider op DDR)
- 2700mhz : 300x9@1.4Vcore (166divider op DDR)
- 2772mhz : 308x9@1.45Vcore (150divider op DDR)
- 2826.8mhz : 314x9@1.5Vcore (150divider op DDR)
- 2880.1mhz : 320x9@1.55Vcore (150divider op DDR) --> SuperPi / aquamark 3
- 2934.1mhz : 326x9@1.63Vcore <--- max stable
2934@1.63Vcore isnt 100% stable , long torture session will end in a reboot . I'm gonna prime overnight @1.65 and see if it makes it.
Anything higher ends in a reboot , no matter what Vcore you trow at it . No error no bod just a black screen and a reboot .
Now all i need to learn is DDR overclocking on A64 , there's just so much to tweak ... :<
Now at 10x280@1.61v 32m super-pi pass. :woot: Will try prime later, still seeing how high it will go.
EDIT: Final update. Highest prime stable is 10x275@1.65v. Tried all the way to 1.7v, couldn't pass prime for more than 10-15 minutes. Looks like 2.7ghz@1.58v is where I'll run, not worth the extra voltage for just 50hz. I have some OCZ platinum rev 2 on the way to replace my twinmoss that died. Hoping for 10x275 or 9x300. One last screenie, 10x285@1.68v, was able to get sandra and a 1m pass of super-pi :D
This looks to be about average for an EPGW, sadly. I was really hoping for 2.8, especially with an H20 setup; it'll SuperPI at 2.8, but fails Prime instantly, even with 1.7v.
ADA3200DAA4BP
LBBLE 0516EPGW
3200 Rev.E 1.58V on a DFI Ultra-D (510-3)
PQI Turbo TCCD 1:1 2.5-4-3-7
http://img122.echo.cx/img122/9480/screen15ps.th.jpg
http://www.xtremesystems.org/forums/...id=30592&stc=1
On a jacked Neo2 only wants to work on single channel.
LBBLE 0516 DPJW
Oh yeah stock cooler!
LBBLE 0516CPBW 3000+ from Monarch
Other Specs:
CoolerMaster Mini Aquagate R80
MSI K8N Neo2 Platinum, 1.5 BIOS
OCZ PC-4800 2 x 512MB
Geforce 6800
74GB Raptor HDD
Running 166 divisor for now, not having much luck at 300 1:1 with this board.
http://ocia.net/playafly187/venicebench.jpg
http://img95.echo.cx/img95/1723/cpuz4gr.jpg i just got this CPU today. sofar it's atleast an hour prime95 blend stable, 3dmark 2001, and 32M super pi.
good so far
only took me 3 chips to get a good one
3200+ LBBLE 0515 EPGW or EGPW (i think... i forgot to write it down before i put it in the computer)
2800
280x10
1.5 V
still got some more priming to do.
~Fizz
- Stepping: unknown yet. i have to search my photos ;)
- VCORE: 1,61v :slobber:
- Method of Cooling: Artic Freezer 64 (air)
AMD 3500+ Venice
DFI Lanparty nF4 ultra-D
2x512mb Corsair 3500 rev. 1.1 BH5
Ati 850 XT
...
http://www.arcor.de/palb/alben/20/53...3566663839.jpg
seems to get stable after some weeks ;)
My 3500+ venice on air:
CBBLE 0512DPAW
xxxxxxxxxxx0068
Validation
http://valid.x86-secret.com/cache/18478.png
PiFast
http://80.69.76.153/albums/kraam/4131_G.jpg
:toast: :toast:
3500+ Venice LBBLE 0516CPAW
DFI nF4 Ultra-D with 3.10p BIOS
2*512 KHX3000 cas2,2,2,5,7,13 1:1 dual
BOXED cooler :D
http://koti.mbnet.fi/dani69/DFI%20nF...1s%20BOXED.gif
http://www.mismatchrats.com/crap/venice_3200_2.jpg
Got this thing at 275x10 so far (at 1.45V). This thing is sooo much better than my '05 Winchester. :D
CPU-Z Verified.
Venice 3000+
LBBLE 0516 EPAW
http://valid.x86-secret.com/show_oc?id=18565
Validated at 2.8
got 3dmark at 2.8 (pic below)
34sec spi not much tweaking at all
Pissed I accidentally killed that 1 stick of Value VX because this one stick I have is great.
few pics attached
Prime stable for hours at 2.7ghz with 1.552 vcore
I love this thing.
new cpu
3200+
LBBLE 0516EPGW
http://img285.echo.cx/img285/8288/2771ag.jpg
DFI ULTRA-D
3000+(0517):banana:
TCCD 256*2
AIR COOLING(XP 90)
http://img1.picsplace.to/img1/2143/cccc.jpg
http://img1.picsplace.to/img1/2143/eeee.jpg
Any results with a
LBBLE 0516 GPBW
Venice 3000+
Since my GF decided to beat up on my Mach2's condenser, I've had to play around with my 3200+ LBBLE 0515APAW on a stock heatsink (with a 80-70mm fan adapter):
http://img76.echo.cx/img76/3342/10x2901ey.jpg
Trying to get some stability here still:
http://img76.echo.cx/img76/1336/10x3003jr.jpg
All stock cooling and a 6600gt:
http://img55.echo.cx/img55/669/3dmark25k6yk.jpg
My new toy :)
Venice 3200+ LBBLE 0517 BPEW
System:
DFI ultra-d
Gskill PC4800LA 2x512mb
with zalman 7000al-cu stock vcore
http://pwp.netcabo.pt/Fintas-XP/2823.jpg
and now with Watercooling stock vcore
http://pwp.netcabo.pt/Fintas-XP/2845.jpg
System in sig:
Prime/SuperPI/Gaming/3DMark Stable
This is not the ceiling of this chip either, will post another update after some more Priming/Burning.
http://shared.sploitz.com/system/A64-v3200-0515.JPG
http://shared.sploitz.com/system/ven...80x10_1.4v.jpg
Thats is the only screen shot I have for 1.4v @ 2800, but if u need one with more Prime time heres one at 1.55v @ 2800 for 19 hours
Set-Up:
Cpu: A64 3200+ Venice
Mobo: DFI SLI-D
RAMs: PDP PC3200 2 x 256Mb XBL Series (Samsung TCCD)
GFX: XFX 6600GT 128Mb
PSU: OCZ 520Watt
Cooling:
Cpu: G4 Storm Waterblock
GFX: Swiftech MCW50
Radiator: Thermochill 120.3
Pump: Swiftech MCP650
First of all the Cpu Batch No:
ADA3200DAA4BP
LBBLE 0518APDW
CPU-Z
http://img.photobucket.com/albums/v1...Z317x9-PDP.jpg
SuperPi 1M Test:
http://img.photobucket.com/albums/v1...0-28835sec.jpg
3800+ CBBLE 0513 CPBW
@1.5v, 1.45v VID 110%+
Stock AMD hsf
Speedfan and all the others show its running a wide range from 33-50C, silly amd hsf
Stable at super Pi 32M, Prime95 for ~5 hours, but 3Dmark crashed only tried it once cuz i dont care for it too much
Using Corsair XMS 3200CL v4.1 @ 2.9v and 250mhz 2-3-3-6 (these are the advertised timings for these dimms
:cool: )
http://valid.x86-secret.com/cache/18878.png
Pretty sure this baby is gonna hit 3ghz... on stock voltage I was able to throttle the clock up to 2.9 in windows before rebooting so with more volts and better cooling I'm confident I can hit my 3ghz goal :toast:
hi
venice 3200+ 0517 BPEW - Stock heatsink cooled
Dfi Sli DR
bh5 twinmos
http://img267.echo.cx/img267/9169/74ksandra3yr.png
http://img264.echo.cx/img264/9973/28sec1qn.png
http://img284.echo.cx/img284/3729/29187sec0jx.png
http://img264.echo.cx/img264/774/27301488vstable0su.png
http://img284.echo.cx/img284/7243/28...vstable7vp.png
suicide shot
http://img284.echo.cx/img284/9330/30041643ze.png
Venice 3000+
517 EPAW
2942Mhz- 1,58V ,WC , SuperPI 16M
http://img.photobucket.com/albums/v3...z-16M-1123.jpg
http://valid.x86-secret.com/cache/19293.png
http://valid.x86-secret.com/show_oc?id=19293
ADA3200DAA4BP Venice
LBBLE 0515APAW Bought from NCIX Computers, Canada
DFI Lanparty UT nF4 Ultra-D
2x 512MB of OCZ GoldVX PC4000
MSI 6600GT
PSU: Enermax 55oWatts EPS12+ 3in1, lightly modified to get adj. Vrail and to fit on the motherboard without the need of an adapter
AMD boxed heatsink :eek: , still waiting for my newer pump than I will slap this new TDX waterblock on it and push it further....
Everything is stock, not even used Arctic SIlver on Cpu or chipset... :slap:
CPU@ 1.5V
Chipset@ 1.5V
Dram @ 3.3V
Max HTT at the moment : 452Mhz :eek:
I will modify later when it will meet water :fact:
*update*
my DRAM was holding me back... a new divider and Im able to squeeze 2950Mhz. 3Ghz is bootable, but not stable at all
SuperPi 1MB: 30secs
ADA3200DAA4BP
LBBLE 0516EPGW
Can't Prime at all! :(
Ok, time to step things up (still on air) ;) :
http://img281.echo.cx/img281/4245/10x290spi32m0fb.jpg
Going for 27's - I have completed 1m @ 28.250, just don't have the complete screenie:
http://img31.echo.cx/img31/6974/10x295spi1mcut9lp.jpg
Ok, so the hyper 6 helped me out a lot.. keeping things cool all the way down to 29/30 C at idle using low rpm. Need water cooling need better ram! 2.9 is all I can get verified, 3ghz is just a no go it looks like at any voltage.
http://valid.x86-secret.com/cache/19717.png
Unmodded Mach2:
http://img215.echo.cx/img215/6171/cp...erified0qy.jpg
3200+ 0517BPDW
2700mhz 10x270 @ 1.36v air cooled XP-90 2-2-2-5
http://www.jpop.com/gocchin/venice2700.JPG
This chip is warming up well now,finaly.Doing ok on air i suppose!
http://img67.echo.cx/img67/8100/validate3nm.png
http://valid.x86-secret.com/show_oc?id=19957
2800 :D
311*9 at 1.475v in bios....
http://img163.echo.cx/img163/3463/su...b3111cc.th.jpg
0517BPDW 3200+ Vapo LS 10x330@1.632v BH-5 2-2-2-5 275@3.7v
cpuz verification: http://valid.x86-secret.com/show_oc?id=19999
http://www.jpop.com/gocchin/venicecpuz.jpg
SuperPi reasonably fast @ 3216mhz... with tight timings:
http://www.jpop.com/gocchin/venicesuperpi1.jpg
3500 LBBLE 0515FPAW [IMG]http://img146.echo.cx/img146/6521/32m2531fpaw3us.jpg[/IMG] Got a new stepping SD : CABGE 0516WPAW to try later. The 3500 LBBLE 0517APOW was ok but not as good as this one.
First post, w00t
LBBLE0515APAW
Mine seems to be the runt of the litter, cannot go over 2.8 prime
http://img.photobucket.com/albums/v7...-venice-OC.gif
2.8 is fine in windows, stock Vcore set in bios
http://img.photobucket.com/albums/v7...Computer/2.gif
2.8 will prime for a little bit but will always fail. Using 1.475 Vcore there, it ran for a while but now it seems to fail; it is inconsistent. Over 2.8 will always fail, even if I go over 1.6 Vcore it fails just as fast. Tried memory dividers and they did nothing.
This is annoying me. 2.75 Ghz is prime stable for hours with 1.475 Vcore, but 2.8 Ghz will NOT stabilize in prime for more than a little while, despite using over 1.6 volts. That is such a sudden wall :(
The ram is definitely good for more, i have ultra loose timings and i've tried all the dividers, tried increasing Vdimm and lowering it as well, but 2.8 Ghz will not become prime stable. I think i have one of the worst 3200+ APAWs but 2.75 Ghz with less than 1.5 volts, i shouldn't be complaining.
28 sec. at 2880 with 1.425 X 113%. [IMG]http://img91.echo.cx/img91/1617/28secpifpaw2hr.jpg[/IMG]
By Cal930
M/B：EPOX EP-9NDA3J VddrMod
BIOS：5215
CPU：Athlon 64 3000+ 0517EPMW
CPU Cooling：ZM-WB+Bath Pump+Ice（Water Temp2℃ Room Temo18℃）
Coolant：Deep Seawater MarineGold
Chipset Cooling：None
Memory:Aarare Original Rev1（SP）512MB×2
VGA：ATI XPERT 98 PCI 8MB
HDD：MAXTOR 6Y80P0
PowerSuplly：OCZ PowerStream 520W
Vcore：1.73V / Vddr：3.76V / Vio：3.74V
OS：Windows Server 2003
http://cal930.sakura.ne.jp/cgi-bin/c...3355_24_29.png
Dont know steeping or anything but I guess its the one with the L since its a 3800+
Vcore was at 1.625
Cooling is air but I cheated since it was cold out so I put a house fan blowign in my case. room temp was at 20C.
CPU temp maxed at 55C usually around 49C.
Pi pic is my best time and so is 3d mark. iT is stable enough to run those programs. Running 2750 right now, just got done playing counter-stike. I had trouble getting 2.7 stable untill I went to 1.600 volts. I can get more system info if needed.
Hi all,here is my first post :D
Venice 3200+ LBBLE 0515 GPBW
(air cooling Cooler Master Hyper6)
DFI lanparty NF4-D
Gecube X700 PCI-E 128mb
Corsair 3200XL REV 1.2 (256mbx2)
Enermax EG475P-VE
My first post :D
Here is my 3000+ LBBLE 0517 DPMW
http://img163.echo.cx/img163/3527/ve...300145v3ft.jpg
i have a LBBLE 0517 APNW also and will post results later coz im still testing :)
Quote:
Originally Posted by TekXoID
Thx :D
here u go
http://img241.echo.cx/img241/5996/a64tweaker5pp.jpg
a64 3000+ venice DBPW CBBLE 0512
Here is my scores, I want mone any ideas ?
315*9 1x1 2T
http://img55.echo.cx/img55/1280/315x97vq.jpg
282*10 1X1 1T
http://img129.echo.cx/img129/9462/282x101x14yu.jpg
i sold my DPMW and bought LBBLE 0517APNW :stick:
9x305@1.65V(bios) is the last prime stable OC however it is benchmarkable 9x312@1.7V(bios)
- 3200+ 0517 BPEW Z....4XX
- 1'66V
- Cooler Master Hyper 6 + papst 40cfm
- 35ºC idle 49ºC full
- DFI SLI-D, Mushkin Level II 3'3V, etc
http://img211.echo.cx/img211/7399/caliente5ms.th.jpg
It does 2600Mhz at 1'37v and 2650Mhz at 1'40v (for spi 1MB).
- 3200+ Venice 0517BPEW
- 1.64V Windows
- Zalman 7700CU
- DFI nF4 Ultra-D
- SP32M stable 2921MHz @ 1.64V
- 3200+ Venice 0517BPDW
- 1.64V Windows
- Zalman 7700CU
- DFI nF4 Ultra-D
- StressPrime2004 2906MHz @ 1.64V for 1h10min. now, I try 24h :D
BTW, for BPDW it's second boot, never seen default speed :slapass:
3200+ Venice
LBBLE 0515 FPBW
http://img57.echo.cx/img57/898/cpunumber4oc.jpg
2800mhz (10x280)
http://img26.echo.cx/img26/5023/desktop9hk.jpg
1.55v bios
1.5 in windows
~Fizz
http://img82.echo.cx/img82/4240/32m8ct.th.jpg
My new Cpu Venice 3000+ LBBLE 0517APQW.This Test was with Ram @166Divider.my Ram can handle 295mhz 1:1@ 2.5-3-3-7-1t,but with 180 Divider i have Problems with stabilitiy if i use the same Timings :(
OEM 3200+ Venice from Monarch in early May
2730 MHz, 730 MHz gain
0516EPEW
SmartGuardian says 1.61v, multimeter says 1.664v. I'm using 1.45v x 113%
Coolermaster Hyper 6
MBM5 says 45C max
DFI NF4 Ultra-D with the 510-3 BIOS, 2x512MB G.Skill LA
25h Prime95, in screenshot
ultra-d
watercooled
the temps are IDLE!!!
geil ultra-x @ 305 2,5 4 3 6
http://img81.echo.cx/img81/2199/ebay9qu.jpg
http://wowgame.free.fr/3000+%20939/L...517%20EPAW.jpg
http://wowgame.free.fr/3000+%20939/L...z1.52v11H4.jpg
http://wowgame.free.fr/3000+%20939/L...-1.584vspi.jpg
Home made watercooling :banana:
not finisht :D
it's too hot outdoor :(
next test Max Screen, i think 3175-3180Mhz at ~1.7v soon :D