The Nexus ones with the same model no. aint good enough?Quote:
Originally Posted by creidiki
I've found almost everything in UK online shops, except for the AquaXtreme MP-05 PRO LE (Delrin)
Emm, whats the 7/16 tubing in mm anyway? *blush*
Printable View
The Nexus ones with the same model no. aint good enough?Quote:
Originally Posted by creidiki
I've found almost everything in UK online shops, except for the AquaXtreme MP-05 PRO LE (Delrin)
Emm, whats the 7/16 tubing in mm anyway? *blush*
Cost more, rewound to be slower, rebadged yates. Yate Loon D12SL-12 work down to 3v with no bearing/motor noise or rattling, so there is absolutely no point to nexus fans imo.
I can get Yate shipped from the USA singularly by 48-hour DHL cheaper than i can get a Nexus without shipping here in the UK.
J-Mag here on forums, 5$ each, shipped me 15 for 15$, or up to 5 for 5$ i think. Depending on exchange rate might be cheaper than fleebay germany.
Masterkleer 7/16 tubing. Thin-walled stuff, bends as nicely as thick-walled tygon, cheap, works great. Love the stuff.
7/16*2,54=x
(11,1mm)
Well, I'd feel better than if I was ordering em from fleebay..Quote:
Originally Posted by creidiki
So with 7/16 (11,1 mm ID and 15,8 mm OD) is it gonna fit into/onto all components - which kinda fittings should I use? Read summat about push-in being the way to go?
Thx for the link =)
no. 1/2 barbs, 7/16 tubing.
Oh ok.. ty :) Plastique/Metal makes no difference?
creidiki: "Diff between Pro LE and SP LE is SP is more expensive and has brass top."
And Pro LE comes with nozzle N02 X Rev. 2 accelerator. SP with nozzle N03 Jets Rev. 2 Accelerator.
But a complete nozzle set cost $5 at cooltechnica/Dtek I think.
xtOm: So get the MP Pro LE and a N03 Jets Rev. 2 Accelerator.
Forgot about that. Unfortunately it costs more to get a Pro with #3 shipped from the USA than to get an SP from E-P. =/
Quote:
Originally Posted by Monge
This one?
http://www.cooltechnica.com/Merchant..._Code=AMD64-WB
Nope:
http://www.cooltechnica.com/Merchant...QX-MP05-PRO-LE
and you can choose Black Delrin Accelerator Nozzle Mid Plate Kit [add $7].
But add shipping costs + taxes and you better go with a SP LE from http://www.extremeprometeia.com/acatalog/aqz.html
AquaXtreme MP-05 SP Limited Edition CPU Water Block (delrin)
comes with N03 Jets Rev. 2 Accelerator.
So um summin up, this is what I should go get?
3 x 120 mm Yate Loon D12SL-12 (20db/37cfm)
Thermochill PA120.3 Radiator (3 x 120 mm)
a T-piece instead of a reservoir
Swiftech MCW30 (chipset)
Swiftech MCW60 (GPU) w/sinks
Laing DDC-Pump 12V Ultra
AquaXtreme MP-05 SP LE (Delrin) w/N03 Jets R2
1/2" barbs and 7/16" tubing
Looks good.
Any outstanding ideas on where to mount that rad on my P180 then? :banana:
Lol. 3 choices:
1. Mod the top - either for internal or external top mount
2. Use a swiftech standoff for mounting off the rear from a 120mm fan mount
3. External radbox
My first thought was #1 - externally.. I've seen some peeps place the rad on top with fans underneath (between the rad and the case) and some the other way around.Quote:
Originally Posted by creidiki
Hmm.. I do have a rear 120mm.. Wont the PA120.3 weigh too much?Quote:
Originally Posted by creidiki
You lost me there, whats this? :eek:Quote:
Originally Posted by creidiki
Nah, you should check the case thread, some guy here - i think it was pickles - hangs a 120.3 with dual shrouds and 6 fans in push-pull off one of those swifty standoffs.
As for the external radbox, its a Box :p: and you like, put your rad inside it, and sit it next to your pc, with the tubes running between them. I think its fugly, but it works.
Very nice wc IMO :)Quote:
Originally Posted by xt0m
If you could get some extra AguaXtreme high flow fittings (10.5mm ID) for the PA 120.3 it would good.
These:
http://www.cooltechnica.com/Merchant...e=Barb_Fitting
Referring to a post on the previous page, if you can get a papst 4412F/2GL or 4412F/2GLL for the same price as a yate loon, the papst is a better fan. It is just as quiet with higher static pressure and will last much longer. I have both and the build quality of the papst is outstanding. In the states a papst 4412/2GL costs ~ $25 when you can find them. A yate loon is ~ $7 if that much. The yate loon is a better value in the states, but not a better fan. The other problem with yate loons is that sample to sample consistency is not as high as with nexus and papst. But you can usually get 2 or 3 yate loons for the price of a nexus.
i do not agree!
What's the deal with D-TEK and AquaXtreme, they sell the same blocks?
D-TEK MP-05 Pro LE AquaXtreme MP-05 LE
I thought Extreme Prometia was the only store in Europe selling this block, but Danish vcore.dk sells the D-TEK MP-05 Pro LE, they also sell the nozzle kit. I like vcore.dk, they sell lots of barbs and if they don't have the one you're looking for they will get it for you. The support is great, even at weekends! They also sell ThermoChill and the DDC-Ultra.
Recommended! :toast:
If I had a store it would be a crossing between petras and vcore.
Amen to that!Quote:
Originally Posted by andersson.j
Vcore is the only decent watercooling shop in scandinavia, i live in sweden an usually shop from them. Great support and fast shipping.
Will that cpu-wb fit onto any m0b0 btw? Just looking at the IC7 pic and comparing with A8N32-SLI - I only have two mounting holes here..
http://www.amdzone.com/pics/motherbo...2-SLI-2D-L.jpg
Itll fit any P4 or s754/939 AMD mobo at any rate, and quite a few others too. Universal mounting.
Well, I'm gonna go with eXa and creidiki's advice - ordered the yates :cool: