R507 single-stage @ - 88.1 *C :-D

Printable View

Show 100 post(s) from this thread on one page

04-12-2006, 11:15 PM
kayl

Quote:

Originally Posted by Sub zero

Great piece of work who wil be the first to -100 on a SS

depends what ppl call a single stage/ if autocascades are considered a single stage
then chilly1 has done it

Quote:

Originally Posted by piotres

Thx Guys :D
Kayl, yes I'll rather enter to autocascade competition, but begining of July it's the eariest time I'll start work on auto-c ...first I must pass my maturity exam in may, than build a single-stage(s) and 2-stage cascade in June, and maybe in July I'll start work on auto-c ;)
Peter

cool peter, good luck with the autocascade, i wont be starting mine for a few months either, need alot of part to start yet.
04-13-2006, 01:07 AM
Leverpospade

Really some nice work Peter :toast:

That's some kicka:banana: :banana: temps
04-13-2006, 08:48 AM
quintus

Quote:

Originally Posted by kayl

depends what ppl call a single stage/ if autocascades are considered a single stage
then chilly1 has done it

cool peter, good luck with the autocascade, i wont be starting mine for a few months either, need alot of part to start yet.

i bet my ass that can be done with water cooling the condens and part of compress....
nice job there polska!!!
czesc,
q
04-13-2006, 11:02 AM
LukeXE

Quote:

Originally Posted by quintus

i bet my ass that can be done with water cooling the condens and part of compress....
nice job there polska!!!
czesc,
q

Heheh, widzę, że znasz troszkę polski :woot: Nieźle ! *

*Heheh, I see that you know polish language a little bit :) Well done !
04-13-2006, 12:35 PM
gloatlizard

piotres plz don't build a cascade with that:D all perfectly done;)
04-13-2006, 12:59 PM
Weee

Quote:

Originally Posted by LukeXE

Heheh, widzę, że znasz troszkę polski :woot: Nieźle ! *

*Heheh, I see that you know polish language a little bit :) Well done !

This I read, "for shizzle my Nieźle"
04-13-2006, 06:10 PM
[XC] MarioMaster

That thing is a beast - rotaries are known for kickass units :)
04-14-2006, 12:19 PM
piotres

Hi

Yesterday I have put that unit on mine poor Radeon X550 card :D ...with V-moded card, I was able to bench all time with -60 to -68*C evap in 3D Marks ;) . I hope tomorrow I'll post some pics here from that benching :)

Regards
Peter
04-14-2006, 12:58 PM
jinu117

So tempting :) Only if I really didn't hate noise. I have problem with most hermatic compressor short of 3 I've seen in person so far... :P
04-14-2006, 05:04 PM
M.Beier

AWESOME WORK :)

Kayl, autocascade, thats 2x compressor's, right?

Peter, Im stunned by this unit, its just AWESOME!!!
One thing I wonder though, rotary, do they make alot of noise?? - That huge fan must, but, wouldnt it be possible to mount 4x 12mm's instead???

How much is there to gain with r402, 5-10 deg loaded, right??? But idle, will it be higher, colder or about the same??

And one more =)
Is there any chance of another condenser so it can fit into a normal width case like mach II / vapoLS just with a biiiit higher case so it ends up with being a 2*midi tower setup ? :)

EDIT:
Peter, I just have to catch you on MSN :p:
04-14-2006, 05:16 PM
n00b 0f l337

Autocascade is one compressor w/ 2+ stages.
04-14-2006, 05:21 PM
Sneil

this is no auto cascade
EDIT: in case that's what one of you were thinking, although I guess there's nothing suggesting you were lol;)
04-15-2006, 12:05 PM
piotres

Quote:

Originally Posted by M.Beier

AWESOME WORK :)

Kayl, autocascade, thats 2x compressor's, right?

Peter, Im stunned by this unit, its just AWESOME!!!
One thing I wonder though, rotary, do they make alot of noise?? - That huge fan must, but, wouldnt it be possible to mount 4x 12mm's instead???

How much is there to gain with r402, 5-10 deg loaded, right??? But idle, will it be higher, colder or about the same??

And one more =)
Is there any chance of another condenser so it can fit into a normal width case like mach II / vapoLS just with a biiiit higher case so it ends up with being a 2*midi tower setup ? :)

EDIT:
Peter, I just have to catch you on MSN :p:

Thx M.Beier :)

Yes, I can fit 4x120 mm on condenser, that wouldn't be any problem .

Changing the gas to R402a or R410a should give 4-7*C boost on evap, both loaded and idle.

Yes, that rotary can be fitted to case which has about 21 cm wide, would be higher only - like 35-40 cm :)

Yep, please catch me on MSN ;)

PS. Sorry guys, today I haven't find time to post pics from benching on GPU with that cooler ...I'll post them tomorrow.

Regards
Peter
04-15-2006, 12:09 PM
Brettbeck

Could someone please tell me whats different about these 'rotary' compressors? Cheers:D !
04-15-2006, 12:32 PM
jinu117

Good comparison will be car engine. Reciprocating (sp?) has pistons, rotary has vanes...... rotary just circles around while reciprocating moves up and down. Obviosuly, rotary can be tons more efficient properly made (at least in car) as far as size vs capacity is involved. (RX-7 has what... 1.5l engine that pumps as much as what cars with 2.5l engine would pump out... yup it has been my fav car for long time :P)
Also, it seems like rotary compressor can handle much higher temperature without mechanical failure in case of refrigeration circuit. Thus people can run higher vacuum with rotary in general without sacrificing too big of space for really out of world performance like this. Only real con is... it is... loud...
For benching, I see nothing wrong with rotary as big hermatic compressor doesn't get too quiet either. (well granted you bench where noise doesn't bother rest of your family member :P)
04-16-2006, 05:40 AM
PoL

OK, I have a question for those who have used or just listened to one of these Rotary compressors. Are they really noisy? Much more than a vapochill?

Thanks guys. :)

PoL
04-16-2006, 06:11 AM
dinos22

Quote:

Originally Posted by PoL

OK, I have a question for those who have used or just listened to one of these Rotary compressors. Are they really noisy? Much more than a vapochill?

Thanks guys. :)

PoL

regarding the noise..............well i also have a pedestal fan pointing at the compressor during the runs to get rid of any hot air pockets inside the box and i can tell you that the pedestal fan on highest speed setting is NOISELESS ahahahahhaha.....so you can imaging the GRRRRRRRRR GRRRRRRRRRRRR GRRRRRRRRRR GRRRRRRRR the rotary is making:D
04-16-2006, 07:12 AM
predator500

Very sweet work and craftmenship on the case
04-16-2006, 07:51 AM
Sneil

I have a 6400btu rotary which is the first rotary i've used, and to tell you the I truth I thought it was going to be a lot louder. I'm using it in my single stage and my wife doesn't have any issues with the noise, so it can't be that loud. It does make some noise yes but its definatly bareable for 24/7 use. Maybe its just mine or maybe both my wife and I are hard of hearing lol
04-16-2006, 08:05 AM
PoL

mmm.... So different opinions, dinos and sneil... Anyone compared it to a vapochill with fans at 100% ?
I want it for my 24/7, but I'm worried about the noise... :slapass:
04-16-2006, 09:00 AM
t800

Quote:

Originally Posted by PoL

OK, I have a question for those who have used or just listened to one of these Rotary compressors. Are they really noisy? Much more than a vapochill?

Thanks guys. :)

PoL

Here is cold_ice rotary in action:
http://www.extremecooling.net/random...410-cooler.avi

quite loud.
04-16-2006, 09:21 AM
PoL

What do you think about using it 24/7? :rolleyes:
04-16-2006, 09:25 AM
Sub zero

I think you need a big set of speakers or headphones lol:p:
04-16-2006, 09:48 AM
jinu117

I deeem vapochill noisy bugger.
Now, I know there are some custom ss even noiser than this using hermatic compressor.
Let me add to fun saying any rotary just beat all of these out the water :P
04-16-2006, 09:53 AM
Sneil

Quote:

Originally Posted by t800

Here is cold_ice rotary in action:
http://www.extremecooling.net/random...410-cooler.avi

quite loud.

Holy hell! mine is definatly not as loud as that jackhammer lol
Yeesh I cant imagine using a compressor like that 24/7

this is my compressor http://www.panasonic.com/industrial/appliance/pdf/cat2r9s3r126a-6b.pdf for those interested. It humms although maybe a little loud, but its a humm not whatever you want to call the noise in cold_ice's unit

Show 100 post(s) from this thread on one page