Ok guys will resize pics.
So far the board fluctuates vdimm 3.19-2.21
OC I have gotten it up to 270 but doesnt want to go further will report back shortly trying to get it to 300.
Printable View
Ok guys will resize pics.
So far the board fluctuates vdimm 3.19-2.21
OC I have gotten it up to 270 but doesnt want to go further will report back shortly trying to get it to 300.
The board overvolts by .02-.04 when i set it to 1.65 i get 1.67-1.69
Quote:
Originally Posted by althes
Is that the most it will change under load? What I mean is if I set vcore to 1.65, and it actually reads 1.67/69, will it be stable and not go higher or lower under load. The AT8 I had would fluctuate on vcore bad. Under load vcor was all over the place...
Yes thats under load so its actually doing a good job
Quote:
Originally Posted by althes
Woot! That's what I wanted to hear. Have you done a HTT test yet? My opty 165 needs at least 322htt for benchmarking. Oh yeah, does it have all ram dividers???
Thanks Althes, and keep us posted...
Cant get clockgen to work on this board.
I may have to install uguru which i havent yet.
WOnder if ati system manager will work.
Try pumping 1.65v+ in a dual core setup... the mosfets will burn your fingers and it'll eventually fail prime.
Is ATI System Manager board specific or does work on all RD580 products? I haven't been able to find it anywhere...
Quote:
Originally Posted by HKPolice
Uhh, same thing happens on my Ultra D without active cooling. Whats your point???
The chipset itself should be more than capable of 322 htt plywood. Whether or not the board is capable is another question.Quote:
Originally Posted by Plywood99
I was able to hit 10k in 3d03 in xfire with x1300's
http://img327.imageshack.us/img327/5...re3d03a6mc.jpg
THE board aint going past 270 i even tried dropping the multiplier.
Going to see what else I can think off, plywood remember with the last ait board this happened until we got a new bios.
have you set PLL to high speed? If that's an option with the Abit board.
not an option
Abit is such a retard. Even Asus has the option.Quote:
Originally Posted by althes
does anyone have ati system manager them can pm to me
sapphire has a new one up on their site
situman - I've been looking for that for days and still haven't found it on their site...
EDIT: Duh... what a dope. I just found it. Thanks-
Its not working can't read ics chip
Probably why clcokgen can't work
Same thing on the Asus....
I can't get the x1800gto's to run in crossfire
Tic Tac need some help with a new bios my friend
How are things going Althes???
Mal and rp still high for stablity.
Board wont go past 270.
WIll try a x23800 when I get home tonite to see how it handles them.
Abit still has that ddr reference still taht goes from -0.6 to +0.6 for ram stabitlity and vtt tracking.
Board may need a vdimm mod for those wanting to push bh5.
I have 2 gigs of tccd to try tonite also and try some 06 runs.
Overall very stable board quicker than the at8, but right its one failing is getting above 270.
I hope the cpu was the problem although I doubt it.
The heatpipe seems to be working fine but you have to put a fan on it for serous stablity.
chew I will have your pi scores with 2gig of tccd coming up shortly.