Strong DDR2 1GBX2 , DDR2 1000 4-4-3-4 Super PI 32M Done

#25 what do you use to stress them .win memtest or? im getting a set ,should be here soon. exactly how did you stress them.

Quote:

---

Originally Posted by vanovich

#25 what do you use to stress them .win memtest or? im getting a set ,should be here soon. exactly how did you stress them.

---

#26,

I used the MemTest from this site: http://hcidesign.com/memtest/

I usually go to around 400%, but I get bored early.

Here's another: 3-3-3 @ DDR2-834

And how much voltages m8, getting a set as well

use memtest x86 or some superpi 32m. that win memtest is not good

Quote:

---

Originally Posted by hot_fifty

And how much voltages m8, getting a set as well

---

2.4v all around for 3-3-3 timings. 2.3v if you use CAS 4.

Quote:

---

Originally Posted by hot_fifty

use memtest x86 or some superpi 32m. that win memtest is not good

---

Huh? That Win MemTest is excellent.. it picks up errors that MemTest 1.65+ won't pick up. For instance, I ran a loop of 1.65+ yesterday for an hour and had no errors picked up, and then used the Win MemTest and had errors in under a minute.

okay wired cause I usally use memtest x86 and find it very, better than the 1 i win, but I will try

Quote:

---

Originally Posted by hot_fifty

okay wired cause I usally use memtest x86 and find it very, better than the 1 i win, but I will try

---

Well, I ran a loop of MemTest 1.65+ using 400MHz 3-3-3-8. Four complete passes and no errors, so all is good. At DDR2-834 there *are* errors, but I fully believe if you can get 2.5vdimm then that could also prove error free. These modules seem to *love* voltage.

is the vdimm mod easy to do on p5wd2-p, and BTW to check how much voltage is giving