Overklokk & Kinc takes 12502 in 06

thx kinc to clear that , i hope to see u guys hit a 1000mhz on core with the mod :D . look @ hipro his crad whent from coldbug @ -30°c it was and -14°c load , up to -75°c core :banana: i like to see what my have in it :p . ccc realy kills the card @ -12°c coldbug :'( i hope to try without the mod to see if ccc helps making te coldbug . i think that Mmouse tested that :) if so that u run without ccc and the coldbug striks @ lower temps its seems that ccc helps making coldbug

good run!!!
yes yes;)
nvidia revenge cooming soon;)

http://www.xtremesystems.org/forums/...&postcount=163

Don't give up yet, you still got more to do...

Well done guys. Really neat that the record stays in scandinavia for some time.
But i just wonder when nvidia is gonna pull up themselves, not much improvement this far according to me. ATI is tuff asusually.

the mem mod is here maby the master card can get some beter mem clocks check hirpo his mod thread ;)

Nice battle going on here!

Those are very low clocks on those x1900s! Can't believe you be second in the ORB now with those measly clocks. Imagine an x1900 crossfire setup at 950MHz on the core... :fact:

But I do like one thing about the results:

3DMark Score (3DMarks)
Kinc/Overclokk 12502
Kingpin 12832

SM 2.0 Score (Marks)
Kinc/Overclokk 5633
Kingpin 01 5964

SM 3.0 Score (Marks)
Kinc/Overclokk 6198
Kingpin 6184

CPU Score (Marks)
Kinc/Overclokk 2666
Kingpin 2733

Its nice to see ATI has a lead in SM3.0. But they are very close! Keep up the good work you crazy LN2 masters :woot:

Quote:

---

Originally Posted by ahmad

Nice battle going on here!

Those are very low clocks on those x1900s! Can't believe you be second in the ORB now with those measly clocks. Imagine an x1900 crossfire setup at 950MHz on the core... :fact:

---

Highest benched Crossfire setup so far. Never seen anyone bench higher than that. 950 is coming though, this master can take -130C base temp so there is alot left in it ;)

A few photos.

http://www.kinc.se/norway/1.jpg

http://www.kinc.se/norway/2.jpg

http://www.kinc.se/norway/3.jpg
Hang on the save screen.

Ouch! A new WR and it hangs! What a shame...

Its nice to see you finally found a crossfire card with no coldbug :)

And I wasn't implying that the clocks were unimpressive, they are very. But it would be nice to have them at 950 :)

Look at crazy hipro:

Quote:

---

Originally Posted by 3DMark01 #1

VGA Sapphire X1900XTX under "controled cascade" (esdee's) with -54*C full load due to cold bug problem - Core = 976MHz, Ram = 972MHz - VGPU = 1.78Volts (Vmoded) , Vdd = 2.482Volts , Vddq = 2.151Volts VDCCI = 1.76Volts (Vmoded)

---

Thats ownage in its best form.

PS> That is a HUGE powersupply (custom 2x600W OCZ I assume)....

do i see 3 psu's hehe :D

great benching style:slobber:

wtg!!!:toast:

Quote:

---

Originally Posted by ahmad

Ouch! A new WR and it hangs! What a shame...

Its nice to see you finally found a crossfire card with no coldbug :)

And I wasn't implying that the clocks were unimpressive, they are very. But it would be nice to have them at 950 :)

---

MM is at 20195 i belive :)

Quote:

---

Originally Posted by ahmad

Ouch! A new WR and it hangs! What a shame...

Its nice to see you finally found a crossfire card with no coldbug :)

And I wasn't implying that the clocks were unimpressive, they are very. But it would be nice to have them at 950 :)

---

the WR is just 1 point ahead

go go go kinc!!

Really nice love the monitor hangin on the wall. :)