Quote:
Originally Posted by dinos22
Considering nf3 250gb bios works pretty fine on nf3 ultra-d, i'd say you're right.
You'll have to ask DeNs about that one though heh :p:
Printable View
Quote:
Originally Posted by dinos22
Considering nf3 250gb bios works pretty fine on nf3 ultra-d, i'd say you're right.
You'll have to ask DeNs about that one though heh :p:
It was victim to one of the early experts taht had some voltage regulation problems. The 4600+ along wiht a FX57 but I think his new 4600+ is nearly as strong if not more.Quote:
Originally Posted by kLLa142
Quote:
Originally Posted by dinos22
I think I can do 3.6g, just wanna confirm I can do that before I post anything
I won't hide anything without sharing.
** yes, S7e93hn and I have done that. try or not is up to you guys;)
Expert became Venus :D any improvements that you can tell at allQuote:
Originally Posted by Onepagebook
great chip there dude :eek: 3.6 :slobber: :slobber: :slobber:
well, it might be the way improved by DS/DDS
I cant beleive through this whole thread no-one took notice of the OPB special edition 2gb set (2-3-2) @ 260. Its truly a race to 20k. With those cards under some LN2, you could get 20k!
care to explain plsQuote:
Originally Posted by Onepagebook
didn't see that BUT i did see a 3D stable 2GB kit of RAM running at DDR600 :toast:Quote:
Originally Posted by moddolicous
i bought a BH CPU today....i'll see how this one goes on the weekend under single stage phase :)...........anyone clocked these under phase
ADA3800DAA5BV
CDBHE 0527UPAW
Chew might of. I kow he has played with a 3800+ under phase. If not I'm losing my mind once again.Quote:
Originally Posted by dinos22
Quote:
Originally Posted by moddolicous
Maybe because he's not going to run them until Monday. Hard to talk too much about them until we see the benches.Quote:
working on 3d06, but most likely I would like to wait until next Monday to run "OPB edition DDR520 2gb set 2-3-2" with that.
here we go again :)Quote:
Originally Posted by dinos22
I ran my CDBHE 0526 under phase. 3 Ghz very easily, 3.1 with some volts.Quote:
Originally Posted by dinos22
my first phase attempt so not sure about again bit hehehehehehQuote:
Originally Posted by eva2000
i'm kinda kicking myself cause i could have also bought a mousepot (i think kyle's one it was) but didn't really show enough interest D'oh!
absolut0....that's good to know :toast:
wat revision was this that had voltage regulation problems? im gettin my DFI expert soon... dont wanna be a victim...Quote:
Originally Posted by Cpt Twitchy
i mean yet another cpu purchase :DQuote:
Originally Posted by dinos22
The Expert runs fine with the Venus bios. Here's just a little test with a crappy 4600+ and the ExpeNus (Expert using the Venus bios..lol):Quote:
Originally Posted by dinos22
http://img91.imageshack.us/img91/1504/12x2658m2dy.jpg
TCCD isn't a problem either @ 1:1 -
http://img64.imageshack.us/img64/7049/11x3008jj.jpg
Please excuse the garbage cpu - I'm just using it until I get a special FX60. Tomorrow I'll try another ADV4400 ACBWE..............
there are lots of Acbwe or ADBHE on ebay right now..
oh :doh: it's all your fault dude :slapass: :DQuote:
Originally Posted by eva2000
nice ExpeNus you got there s7 :D
can you or OPB pls tackle this comment in some meaningful detail here or PM whichever pleases you :)
Quote:
Originally Posted by Onepagebook
does that mean its a girly board now?? :eek:Quote:
Originally Posted by s7e9h3n
DS/DDS = Drive Strength/Data Drive Strength. OPB's referring to how the Venus bios sets these values differently than the "conventional" Expert settings. In the Venus bios, it seems that Drive Strength values 1-4 correspond to 5-8 on the Expert. As a result, I'm running a DS/DDS of 3/3 on the Venus bios - > which corresponds to 7/3 in the Expert's bios.....Quote:
Originally Posted by dinos22
Nah, it just means that the board's now set so it can't d1ck me around anymore :p:Quote:
Originally Posted by STEvil
Quote:
Originally Posted by s7e9h3n
what do mean by that steven? :confused:
does the eXpert have any benefit of the venus bios? :D
anyway kick some ass kevin! :slapass: :toast: :clap: :woot:
Doesn't mean anything....the bios doesn't do any "miracles" for the Expert board besides giving it a different boot screen :DQuote:
Originally Posted by mag|c
OPB's currently playing with his FX60 on his single stage. Things look promising so far ;)
so basically venus and expert pretty much perform the same according to youQuote:
Originally Posted by s7e9h3n