lol.
well i got a 144 CACJE 0604APMW
seems like a dud overclocker.
2.7 (9x300) @ 1.55 prime stable.
.sigh. 1 week difference... such varying overclockability
Printable View
lol.
well i got a 144 CACJE 0604APMW
seems like a dud overclocker.
2.7 (9x300) @ 1.55 prime stable.
.sigh. 1 week difference... such varying overclockability
I picked up a CACJE 0604CPAW 146.....running 3.0GHZ for 20+ hrs prime so far at 1.53v on DFI Expert and Big Typhoon cooler.
nice work and very nice chip, its look like the 06XX chip are great :toast:
i disagree, if your looking for air/water (a large majority), the coldbugged mem controllers work very well.Quote:
Originally Posted by Fixxxer
I just got a CACJE 0603 from AMD on an RMA, not as good as my CAB2E 0540.
One thing I noticed about the CACJE chips (I've had a 0545 before too) is that they lock up when they are not stable, the CAB2E would just give an error or restart.
CACJE also cold bugged at about 10C which is worse than the CAB2E
I've read that people are saying that the IHS contact is good on 06 chips. Disregarding that, I popped the top of my CACJE 0603FPMW, cleaned the paste up, applied AS5 and glued her back on. I'd say it was worth it so far.
Temps:
http://img146.imageshack.us/img146/2...compare6dv.png
VCore:
http://img146.imageshack.us/img146/1...compare5ip.png
Don't quite understand why my VCore is fluctuating now though :stick:
Hmm this is what I did with the 146..:)
http://img67.imageshack.us/img67/1886/3g1rs.th.jpg
Its on a crappy A8V Deluxe (sigh, I need a new board) with 300HTT limit so its maxed out.
And temps aren't too high as its on stock cooler (not assembled WC kit yet) and Goa is pretty Hot these days :cool:
CACJE 0601GPAW also here.
Tested with stock air @ 2.75GHz / 1.41V.
It is running too hot there 55 C ~full load.
So IHS is bad & Opteron too are hot.
I cannot test any further.
http://img474.imageshack.us/my.php?image=10x2759qq.jpg
How stable is this?Quote:
Originally Posted by vanquish
^^ Very unstable :( , gets too hot down here, room temps are 34C
Seems like that... Its getting too, too bloody hot. Really need to get myself a WC kit soon...:|Quote:
Originally Posted by Spyrus
mine is running 3.15 ghz with 1.6v at 35c load.
i think ihs removal would be nice as im getting a 15c delta between idle and load.
but im not doing that until im done playing with BH-5 :)
Some test with BH5.
SP8M 3.080 Mhz
http://img342.imageshack.us/img342/7...30653rr.th.jpg
SP1M 3.118 Mhz
http://img416.imageshack.us/img416/5...zbh50tl.th.jpg
SP8M 3.0Ghz 1.5V
http://img466.imageshack.us/img466/3...30008zd.th.jpg
Water cooled. DICE session was a waste of time.
^^ Stable ?? Water/Air, with/without IHS ??Quote:
Originally Posted by Revv23
was stable on air... with ihs.
cpu is gone now. :(
My 0603 CAJE is doing great on the mem controller side. Does 300mhz no problem and I got it to my TCCD's max of 307mhz.
http://www.xtremesystems.org/forums/...ad.php?t=93993
I picked up a 146 CACJE 0603FPMW the first of March. It will do Super pi @ 3.1g but I don't take super pi as stable.
I have it prime95 stable for 8 hrs @ 2.97g with the 180 divider on a Ultra-d
I have had it @ 3.05g but I don't like my temps @ that setting and I didn't complete the prime, but I think (big if) it would have completed 8 hrs. It got up to 51c with 1.584v and that's a little hot for me.
But at 1.44v I'm sitting @ 30c right now.
I run it @ 2.88g @ 1.44v - prime95 stable for 8 hrs.
Here's the entries @ DFI Street in the OC Database where you must at least post with this and a few more benches to prove your stable.
2.97
http://www.dfi-street.com/forum/show...&postcount=170
2.88
http://www.dfi-street.com/forum/show...&postcount=174
Any result from 144 CACJE 0606 ? Does anyone have it ?
Bumping up this old thread...
Very early results, didn't really get much time to work on the RAM's and all...
http://s2.supload.com/thumbs/default/3G.jpg
http://s2.supload.com/thumbs/default...0407104505.jpg
Hmm... nobody :P
Couldn't open the pics, i got a 148 CACJE 0544 EPAW yesterday, and my biggest problem is that the CPU it's WAAAAAAAAYYYYYYY HOT ! I have a XP90c + VanTec Tornado 92mm, and @ 1.36v in CPU-Z it goes to 43º in full load...
Does 2906Mhz @ 1.36v (Default is 1.4) and 3050Mhz @ 1.475... My biggest problem is the temps...
you are complaining about those temps? My dud 148 max temp is 56c in prime95 2.75ghz @ 1.5v. Still ran blend and Large TFFT for 11 hours till i stopped it.
What chip did you have before? A +3000 Venice??Quote:
Originally Posted by God_Lx
Those temps are excellent for an air cooled opteron.
Just got mine... I will put it to my dfi .
I have a ss in a case with small compressor (1/6).... I will post later...
CACJE 0603FPMW
hi, i have the oportunity to buy a cheap opteron150 with this step:
OSA150DAA5BN
CACJE 0603CPMW
I want to know if it will overclock as good as my opty146 cabye 540 (it do 3ghz with 1.5v)
I need your help!! :D
very thanks
Quote:
Originally Posted by m_enanos
I think soo try it :)