Amd Spi 32mb New Wr

Printable View

Show 100 post(s) from this thread on one page

02-08-2006, 01:08 PM
fredyama

Quote:

Originally Posted by formyfaith

Actually, I've learned a lot these days from your previous threads.
Thank you Fredyama. :toast:

You are quite welcome:toast:

Yup, SanMax is the best old skool BH-5 from Japan-- you are very lucky to get them at auction though... must be 0339;)
02-08-2006, 05:07 PM
formyfaith

Quote:

Originally Posted by PRTeamJapan

You are quite welcome:toast:

Yup, SanMax is the best old skool BH-5 from Japan-- you are very lucky to get them at auction though... must be 0339;)

They are from Yahoo Japan auction a few years ago, and yes they're 339 :)

Actually this pair belongs to a friend of mine, and he's been letting me use it freely
whenever I want, wanna thank him a lot on this occasion. :toast:
02-15-2006, 03:11 AM
before

Nice results here! :toast:
02-17-2006, 07:45 AM
Dani

Very nice SP32M there:toast:
What BIOS did you use on your DFI nF4 EXPERT & FX-57 combo?
02-17-2006, 07:59 AM
formyfaith

Quote:

Originally Posted by before

Nice results here! :toast:

Thanks a lot. :)

Quote:

Originally Posted by Dani

Very nice SP32M there:toast:
What BIOS did you use on your DFI nF4 EXPERT & FX-57 combo?

Thank you Dani, I'm using the 11/25 bios. :)
02-17-2006, 11:58 AM
UTF Nightmare

Nice cpu you got there man. 3,8 GHz Spi-32m on DI is really impressive :)
02-18-2006, 01:19 PM
formyfaith

Update

New SPI 32MB trial record : 18m 56.563sec

Test Rig
--------
CPU : AMD FX-57 0516 WPMW @ 3855 Mhz (257*15) 11/25 BIOS
COOLING : LN2 with 2.5in copper Mousepot
RAM : G.Skill GH 512MB * 2
MB : DFI nF4 SLI-DR Expert
VGA : Geforce 6200
PSU : OCZ Powerstream 520W * 2

VCORE : 1.525v * 1.09= 1.65V (BIOS)
VDIMM : 3.48V (BIOS)

http://myhome.hanafos.com/~onechu/ln2/pi_value.jpg

This is my first LN2 trial, and it was so much fun. :)

At first I was so frusterated that LN2 went thru very quickly and there was
nothing more furstrating than to constantly refill the thermos cans. lol.

So I had to end the bench within an hour, and need to call my friend again
to help me transfill more LN2 to my thermos cans. lol
(50L dewar is almost 60Kg heavy, and I can never move it around by myself.lol)

Will try more benchies the following day.
Anyways, welcome me to the 18min club! :D

And thank you Mikeguava for your nice LN2 advice. :toast:

Bellow are some digicam pics taken from Stephen's advice. ;)
(I didn't do it wrong again, did I?)

7 Loops Finished
http://myhome.hanafos.com/~onechu/ln2/7_loops.jpg

15 Loops Finished
http://myhome.hanafos.com/~onechu/ln2/15_loops.jpg

20 Loops Finished
http://myhome.hanafos.com/~onechu/ln2/20_loops.jpg

24 Loops Finished
http://myhome.hanafos.com/~onechu/ln2/24_loops.jpg

Finished
http://myhome.hanafos.com/~onechu/ln2/pi_value.jpg
02-18-2006, 01:39 PM
bachus_anonym

Awesome result, formyfaith :toast: You're not giving up your 1st spot too easy, are you? :up:
Those 0.x00s pull-aways from Fredyama must be really getting on his nerves :lol: It would for me If I was in his shoes :D But it looks like Fred might have some tweaking to do as you're beating his previous WR with quite less MHz (CPU & RAM)...

It's awesome to see you guys both battling for top spot in SPi32M :fact:
02-18-2006, 01:55 PM
formyfaith

Quote:

Originally Posted by bachus_anonym

Awesome result, formyfaith :toast: You're not giving up your 1st spot too easy, are you? :up:
Those 0.x00s pull-aways from Fredyama must be really getting on his nerves :lol: It would for me If I was in his shoes :D But it looks like Fred might have some tweaking to do as you're beating his previous WR with quite less MHz (CPU & RAM)...

It's awesome to see you guys both battling for top spot in SPi32M :fact:

Thank you Bachus, think I can higher the CPU clock a bit higher too, but not sure about that yet. Had to end the bench so quickly. ;)

Well I expect it's only gonna be a 2-3 day, a week at the longest, podium takeover for me again. :D

I'm sure yama-san will comeup with better scores. Need to try harder :)
02-18-2006, 02:37 PM
s7e9h3n

What, it wasn't stable enough for a REAL Screenshot from your computer? :p: heehehee....j/k......That's WONDERFUL work :toast: ....What were your temps like? Also, where's your a64 tweaker shot? I really wish I could get this x15 multi unlocked on my Opty. If it was available, this cpu could possibly be strong enough to give you and Fredyama a little bit of competition. Maybe I'll try 32m @ 13x300 1:1 with TCCD :rolleyes: ONCE AGAIN - GREAT JOB!!!!!!!:up:
02-18-2006, 03:30 PM
fredyama

Congrats formyfaith on your new AMD modPI 32M WR:toast:

Yup, I wish someone helping me to pore LN2 into my Pot:D -- like we say need 4 hands & 4 eyes to bench about 18.xx minutes;)

Always nice to see someone benching SPi32M:)

Cheers:toast:

Fred
02-18-2006, 04:03 PM
dinos22

Quote:

Originally Posted by s7e9h3n

What, it wasn't stable enough for a REAL Screenshot from your computer? :p: heehehee....j/k......That's WONDERFUL work :toast: ....What were your temps like? Also, where's your a64 tweaker shot? I really wish I could get this x15 multi unlocked on my Opty. If it was available, this cpu could possibly be strong enough to give you and Fredyama a little bit of competition. Maybe I'll try 32m @ 13x300 1:1 with TCCD :rolleyes: ONCE AGAIN - GREAT JOB!!!!!!!:up:

steven just send it over here.....i'll just unlock the next multi.....hehehe hmmm might give my dual core a crack in this magic ultra-d who knows right heheh
02-18-2006, 04:04 PM
s7e9h3n

Quote:

Originally Posted by dinos22

steven just send it over here.....i'll just unlock the next multi.....hehehe hmmm might give my dual core a crack in this magix ultra-d who knows right heheh

If your dc somehow is able to unlock in that board, I just may consider it then :p:
02-18-2006, 04:12 PM
HARDCORECLOCKER

:D Oh what a hell of a machine......;)

:toast:
02-18-2006, 05:09 PM
ahmad

Post your new result @ Holichos. You beat fred by less than 100ms. Great job.
02-18-2006, 09:11 PM
formyfaith

Quote:

Originally Posted by s7e9h3n

What, it wasn't stable enough for a REAL Screenshot from your computer? :p: heehehee....j/k......That's WONDERFUL work :toast: ....What were your temps like? Also, where's your a64 tweaker shot? I really wish I could get this x15 multi unlocked on my Opty. If it was available, this cpu could possibly be strong enough to give you and Fredyama a little bit of competition. Maybe I'll try 32m @ 13x300 1:1 with TCCD :rolleyes: ONCE AGAIN - GREAT JOB!!!!!!!:up:

Thanks Stephen, and now there is an another advice from you again. :D
I'll make sure I post a screenie next time along with A64 tweaker. :)
Temps were -58C~-60C at the IHS from my Fluke thermometer.
Mem timings exactly the same as my previous run. :)
Looking forward to some awesome results with your SUPER Opteron, too. :toast:

Quote:

Originally Posted by PRTeamJapan

Congrats formyfaith on your new AMD modPI 32M WR:toast:

Yup, I wish someone helping me to pore LN2 into my Pot:D -- like we say need 4 hands & 4 eyes to bench about 18.xx minutes;)

Always nice to see someone benching SPi32M:)

Cheers:toast:

Fred

Thank you yama-san. Now I understand how everbody feels when benching with LN2. So HARD, and my arms ache so much. :D

Quote:

Originally Posted by HARDCORECLOCKER

:D Oh what a hell of a machine......;)

:toast:

Thank you, HARDCORECLOCKER. :toast:

Quote:

Originally Posted by ahmad

Post your new result @ Holichos. You beat fred by less than 100ms. Great job.

If I can't get a few seconds lowered SPI record, I'm going to post it at Holichos. Thanks. :)
02-18-2006, 11:22 PM
s7e9h3n

Quote:

Originally Posted by formyfaith

Thanks Stephen, and now there is an another advice from you again. :D
I'll make sure I post a screenie next time along with A64 tweaker. :)
Temps were -58C~-60C at the IHS from my Fluke thermometer.
Mem timings exactly the same as my previous run. :)
Looking forward to some awesome results with your SUPER Opteron, too. :toast:

Hehe..it wasn't meant as advice ;) I just wanted to see what changes, if any, you needed to make to your timings as you increase your FSB.
-58 ~ -60C? You weren't able to get those temps with DI? That cpu is just plain crazy...I can get better than those temps with my autocascade, but I just can't imagine being able to run that speed @ that voltage...WOW :clap: :toast:
02-18-2006, 11:32 PM
dinos22

Quote:

Originally Posted by formyfaith

New SPI 32MB trial record : 18m 56.563sec

Test Rig
--------
CPU : AMD FX-57 0516 WPMW @ 3855 Mhz (257*15) 11/25 BIOS
COOLING : LN2 with 2.5in copper Mousepot
RAM : G.Skill GH 512MB * 2
MB : DFI nF4 SLI-DR Expert
VGA : Geforce 6200
PSU : OCZ Powerstream 520W * 2

VCORE : 1.525v * 1.09= 1.65V (BIOS)
VDIMM : 3.48V (BIOS)

what HDD was used

also did you use RAMDisk

was that still with Win2003 server
02-18-2006, 11:41 PM
s7e9h3n

Quote:

Originally Posted by dinos22

what HDD was used

also did you use RAMDisk

was that still with Win2003 server

Ok, since it's question time :p: I have one too:

How do you configure your psu's when plugging them into the board/hdd's/video cards?
02-18-2006, 11:43 PM
Coroner Kyle

Congratulations on an amazing chip and time. I await your next WR. :)
02-19-2006, 12:02 AM
fredyama

Quote:

Originally Posted by formyfaith

Thank you yama-san. Now I understand how everbody feels when benching with LN2. So HARD, and my arms ache so much. :D

Get well from your back ache as well:D
02-19-2006, 01:08 AM
G H Z

Nice FMF, FX in 18M zone is amazing :toast:

Is this chip topless?
02-19-2006, 07:58 AM
ODIO

nice job!!!
impressive low vcore:):)
try better run with ln2!
02-19-2006, 09:08 AM
formyfaith

Quote:

Originally Posted by dinos22

what HDD was used

also did you use RAMDisk

was that still with Win2003 server

I haven't tried ramdisk yet.. not sure with how to use it. :D
HDD is Samsung SP2504C 250GB SATA II single..
Bench was made with a plain install of Win2003 server..
Right now, I think making the system stable is the Key to running SPI 32MB.
Need to experiment some more tweaks known here in XS. :)

Quote:

Originally Posted by s7e9h3n

Ok, since it's question time :p: I have one too:

How do you configure your psu's when plugging them into the board/hdd's/video cards?

Power 1 - MOBO only
Power 2 - everything else which includes fans, hdds, and vid card.
BTW I need to try to place the probe more tightly for temp monitoring.. Found out that the probe
was kind of misplaced after the bench.. Is there a good way to prevent the probe from moving around while insulating? :)

Quote:

Originally Posted by Coroner Kyle

Congratulations on an amazing chip and time. I await your next WR. :)

Thanks, I'll try harder. :)

Quote:

Originally Posted by PRTeamJapan

Get well from your back ache as well:D

When I woke up this morning, I found out my back hurts more than my arms..
Really need someone to help me all the way from the start till the end next time. :D
BTW I really think you guys are LN2 pros, doing those LN2 benches all by yourselves..
Need to learn a lot on how to handle LN2 more efficiently. :)

Quote:

Originally Posted by G H Z

Nice FMF, FX in 18M zone is amazing :toast:

Is this chip topless?

Yup, IHS will be staying on forever..
Never really had any luck with naked CPUs.. All of them eventually died.. lol :D

Quote:

Originally Posted by ODIO

nice job!!!
impressive low vcore:):)
try better run with ln2!

Thanks ODIO, I really need to learn more with how to handle LN2.. :)
02-19-2006, 11:40 AM
s7e9h3n

Quote:

Originally Posted by formyfaith

Power 1 - MOBO only
Power 2 - everything else which includes fans, hdds, and vid card.
BTW I need to try to place the probe more tightly for temp monitoring.. Found out that the probe
was kind of misplaced after the bench.. Is there a good way to prevent the probe from moving around while insulating? :)

Here's how I place my probe - It very rarely moves out of place. It's stuck in place due to the layer of insulation I put down before putting the top layer of neoprene on. It's basically embedding in the cork tape and then for added measure, I loop it through the mosfet heatsink just in case the wire gets accidentally yanked on, it won't affect the placement of the probe. If you still have probs with the probe moving after this, you can always put a dab of hot glue on the wire running through the mosfet sink.....

http://img115.imageshack.us/img115/2...mpprobe5mh.jpg

Show 100 post(s) from this thread on one page