WOOHOO! Congrats man!
Sick mem speeds! and nice (new?) watermark!
WOOHOO! Congrats man!
Sick mem speeds! and nice (new?) watermark!
thanx. Barely any artifacts at those speeds. 2200mhz? Now that would be beyond sick lol. The screenshot was taken with the clocks set :)...tiny bit of snow during run on gt2 and trolls lair, but thats it. 2200 could happen with my solid gpu units.Quote:
Originally Posted by vapb400
SOLID GPU UNITS!!!!!!!!!! OH MY GOD! that is gonna be awesome.
Do you currently have memsinks on your ram or any fans? Or is the ln2 the only (lol) cooling on them? Will your solid containers cool the mem any better? I can not wait for pics of those, when do you think you're gonna have them?
*edit* and do you still use ARC press? or just springs and normal mounting?
*edit again* -50c is your coldbug temp on gfx? or can you push it down furthur
man that chuck norris :banana::banana::banana::banana: in your sig is killin me :)..Quote:
Originally Posted by vapb400
No memsinks..just a few 80mm fans blowing on the cards. -55c or so and around 1.76v core and a little over default voltage on the memory.
Solid containers will cool the whole card better. I should be benching with this week. We designed a pretty cool mounting system that uses pcb board material (very strong when thicker) for the "slide down" which will be able to be changed for diff vid cards for mounting. Can't really speculate to much on performance till I test them. I'll post pics and results in ln2 forum. THey will for sure be a million times better than this weak one I made. These cards are similar, but diff in some ways. One can get into windows at -100, but can't bench below -83c or so. The other can bench at -100, but can't get into windows above -72c...lol wtf is that. The card on the small brazed up container is holding back the core clocks to around 770 so far. Havent tried to hard to go much farther, but the more volts/clocks the more the temp swings like mad. Both card are running the exact same bios.
Not even G...I bet he is running the same lod as me lol. My card was clocked at 818/2100+ for that run man. Thats not all lod power, thats gpu power too.Quote:
Originally Posted by G H Z
His card is only clocked at 740/2000...big difference.
Not to take anything away from his great score, but my CL crushes his by 80fps and my LL has him by 20fps. You can blame the p4gd1 for the crap systems scores. Look at the compare of 01 scores:
http://pic8.picturetrail.com/VOL256/.../124221592.jpg
This if frkn insane. realy wtfc are those clocks real:toast: Congrats man this is awesome run. I see you got that A64 working nice with Ln2. It's a shame that we dont have a better board then gd1 for your 780.Quote:
Originally Posted by k|ngp|n
Vince, at what Ram frequency and fsb did you run the 2k1 with the P4GD1 mobo?....Quote:
Originally Posted by k|ngp|n
Congratulations V! Some nice benching over the last few days man! I can't wait to see those solid gpu units. If you ever need to "get rid" of your old gpu units, I could always use some better cooling for my GTX 512's ;)
I see your point on the card clocks, sorry about that :)Quote:
Originally Posted by k|ngp|n
Still I'll bet he isn't running the same LOD. It would be interesting to see where he'd be running similar card clocks.
way to go Kingpin! :cheer:
hope you'll get the 03 now :thumbsup:
Awesome job Vince! :toast: Got your message this am and just checked when I got to work. Really insane memory on those cards can't wait to see how the solids do. :slobber: Time to grab 03 for the dual and single trifecta! :banana: :banana: :clap: :woot:
wtg Vince :)
Congratz. You make things look easy :)
Quote:
Originally Posted by k|ngp|n
Grats on the WR Kingpin!!!!!
Awasome mem clock on the cards :toast:
Yeah Im stunned by your grafic performence! You will probably take 45k easy with you new solid gpu containers in 03.
Congratgs again K|ngp|n! Amazing work.
The best bencher of 2005 did it again :) simply amazing ;)
I have a good set of lod values for each test in 01' that I run. I am sure overklokk does too. Most tests use diff values for best points....thats where a little leg work pays off. On a scale of 1-15, what values do you think score the most points in the test where it makes the biggest difference? Ill give a hint-- it's <4.0Quote:
Originally Posted by G H Z
BTW is that Cornell in your avatar?
@Hipro-- I was running 271 or 272x14 I think in that 50.9k 01' score. Can't remeber exact fsb, but for sure it was 14x. 275x14 will score closer to 52k single card for 3dmark 2001 ;)
and thanx again for the congratz guys..not done just yet with fx57 and 05'.
Interesting stuff, yup that's Chris.
Here's to a very fine '05 KP :toast2:
Pic of the rig I used for 3dmark2005 last night:
http://pic8.picturetrail.com/VOL256/.../124265883.jpg
DFI SLI-d
fx57 0530 apmw Dragon solid ln2
2x512 muhsking lv2 bh-5
2x7800gtx 512 ln2 One chilly1 gpu container and the other made from dangerden waterblock and some copper thin walled pipe small enough to fit the spacing on the nf4.
Most of my 2003 benching will be on the expert with the new containers becasue it is impossible for them to fit the SLI-d
Good stuff
2006 is going to be a good battle. I have everything lined up but database set me back a few days. CES is here now, DAY1 for press.
I hope by the end of the weekend to have some serious scores on the board.
congrats K|ngp|n, awesome scores. :)
Hey kingpin... im gonna get a 512Mb GTX also in february i think.. What volts are u giving the card? Hope to get the second place cuz i only have a Opty 144 though i want to get better MHz then u from the GTX :)
And what scores did u get with single card.
amazing cpu..
...amazing video card..
...amazing cooling...
Amazing Clocker;););););););)
The best score came!
congratz boy!!
Amazing stuff KP!
Congratz on passing Kinc. We all know that's a real task! :toast:
You got me back to benching the 512 7800s again, I hope I can give you a bit of competition :D
The best thing I've heared in a long time! We might have a real 3-way battle on our hands then. That's the stuff! :DQuote:
Originally Posted by LardArse
Nice job I can't wait to see the Solid Units.
BTW how do you people either change LOD values in between Tests or clocks or do you leave them the same and just find the best one for all of them.