Good luck Primoz.. :)
@Ben....I don't understand either...I ran SLI-D for 3 months daily 7/8 hours with cascade with high oc (and stock run too)...... no problem.
Printable View
Good luck Primoz.. :)
@Ben....I don't understand either...I ran SLI-D for 3 months daily 7/8 hours with cascade with high oc (and stock run too)...... no problem.
sorry to hear about ya m/b dumo
"death in combat" is the only way to go
Well. sXXX happens :) bazx.Quote:
Originally Posted by bazx
Can I copy your oc desk? Thats an awesome work there.
Happy Tx giving to all :toast:
Dumo, sorry to hear that. I still have yet to try mine, waiting on master. Threads like this make me a little leery about hitting the power button ;)
Quote:
Originally Posted by G H Z
you might be alright, as I also seen some other folks didn't have any problem with the RDX or the Expert, but if more cases like this happen in the next few weeks then DFI probably would take a more serious look at it.
Im so far so good with both Expert and RDX-200 with my FX55 ClawHammer,Quote:
Originally Posted by ben805
but I do not dare to place my FX 55 or 57 San Diego's
(0516 WPMW's on both cores) on these boards.
Cannot afford to lose my good chips.
@ Dumo sry to hear you lose your 0442 GPMW on the RDX-200.
Like I said before this is not isolated, given both Expert and RDX-200 have
similar power design. :cool:
sorry to hear that Dumo. keep up the good work man.
do you have pics of bazx's overclock desk? i couldn't find any.
Wow Dumo that sucks bro. Funny thing there is going to be a hysteria here on XS. All of the noobs will be asking if this mobo is safe. Remember the hysteria caused by OPB eXpert? And those noobs on the DFI-Street forums, especial Angry Games or whatever his name is will be laughing at us.
I promise you, Dumo's smoke wasn't the result of excess Vcore or anything Oskar had progged in the bios....it's something else ;)Quote:
Originally Posted by ben805
If DFI stay with 4V jumpers for these new generation mobo...
It was proved working ok.with ultra-D and SLI-DR
My friend has been running older hardware for a while (NF7 2400+ etc) due to little income from an injury that kept him from working. He got a settlement and had some dough for new system. We worked on his new RDX, 4000+, x1800xl and Enermax Liberty 620w, etc.. Put it together out of the box with only cpu/hsf, ram and video card. We fired it up and got a BIOS screen and it just hung there. Pull cmos jumper to clear, reseat main psu plug and fire it up, hang again at BIOS screen and then POOF! Burnt mosfet, took it apart and went and got a Asus A8N-E Deluxe at local shop and it has been fine for two days.
These boards are total $h1t if you ask me.
Well... there's always that new ASUS CF board...
@SPQQKY...Do you remember which mosfet it was...check my pic. in the first page...thanks.
@Charlie...thats probly the route for crossfire :) ..Wonder if Asus implemented diffrent power system.
dumo ,was that sound a fairly loud almost shriek when that damage happened my rdx made that sound a couple times then b/c of mem probs went back to my ultra-d . and now im seeing all this.
Sounds like that.Quote:
Originally Posted by LoN3R
well thats staying in its box ;P
hehe i will send you the plans and a little oc table to start you offQuote:
Originally Posted by Dumo
The ddr booster is a risky business in itself. I personally have fried 2 of em. As others have said perhaps get a mobo with 5v dimm feed and mod.
Don't get me wrong The noise from blowing a ddr booster is F in loud and is very satisfactory.
You guys should try the A8R-MVP when it becomes available - I'm hearing great things about it, not to mention that its going to be ~$150.
Perkam
Both Sapphire's and DFI's version of the halibut board will be awesome.Quote:
Originally Posted by perkam
The DFI RD480 CF-BT is the board to have with crossfire. :cool:
That remains to be seen. I'll get an A8R-MVP as soon as it show up here, no DFI crap for me, thanks.Quote:
Originally Posted by Dynasty
Asus CF board is interesting...too bad it is not one of those highend boards packed with everything :/ wish they made a a8n32-sli kind of board for crossfire
damn dumo thats very bad, been running the rdx200 almost 2 week every day.
with 3.6V for the mems and 1.7 for the cpu, the only prob is 340 max HTT.
and its not giving the bh-5 what it was on the NF4 sli.
and the bootingproblem is still there, have to hit the power few times when the psu was pulled out.
grtz;)
The Asus mobo only limits CPU vcore to 1.65V and Memory VDIMM to 3.2V, Pretty sure it can be changed with a bios as its off the refrence Sapphire design..
after seeing all these RDX200's burn, I'm quite skeptical if I should pull the trigger Dec 1 or wait till something better....
very sorry for u DUMO . :(
il like running the RDX200 for i long time now and now problems it runs like 1.75vcore on x2 and 3.7vdimm to 3.56vdimm and no problems , im like te lucky man in the world no problems . exept like jort bh-5 :( cpu on wc ;)