Well as of right now 3100 MHz 3D05 proof so far on DFI RDX200.
Nothing to write home to mom about, it took a lot of volts to get this far.
OPP
http://www.xtremesystems.org/forums/...id=39727&stc=1
Printable View
Well as of right now 3100 MHz 3D05 proof so far on DFI RDX200.
Nothing to write home to mom about, it took a lot of volts to get this far.
OPP
http://www.xtremesystems.org/forums/...id=39727&stc=1
Wonder how she would do in a DFI NF4 ;) Anyhow, thanks for the update.
Tomorrow I’ll throw this chip under -90C on the DFI Expert and see if she’s bugged.
OPP
That's still damn nice... but... I don't wanna know what it cost compared to a gold 146....
~ x5 ;)Quote:
Originally Posted by phadeout
What air cooling are you using or water?, That chip dont look good, my 146 do the same :p: ~airQuote:
Originally Posted by OPPAINTER
It'll do MUCH better on phase change... assuming there's no BUG. They just make a LOT of heat :shrug:
My 150 did about 3000mhz 1M on water @ like 38C idle
My 150 did 3440mHz 1M on phase @ like 8C idle
At 3600mhz I can start superPi and it dies about 3 steps in... from the heat, at only 1.6v. With -50C bulletproof cooling, it's probs be benchable at 3700-3800mHz...
They are VERY GOOD under the ice :D
Nice cpu :fact: Show us what that chip and cascade can do. :toast:
It will be interesting to see it with cascade. W/out or little cold bug probly 14X265 attainable?
nice about same as my new 146 CAB2E 0540FPMWQuote:
Originally Posted by OPPAINTER
2x 512MB Gskill PC4400LE TCCD 431
@282mhz 2.5-3-3-7 7-14-2222 on 180 divider
http://www.fileshosts.com/DFI/NF4_SL...rpi-32m_tn.jpg
So far best 1M clock/time
http://www.fileshosts.com/DFI/NF4_SL...erpi-1m_tn.jpg
on puny 1/4" tubed Hydrocool
http://www.fileshosts.com/DFI/NF4_Ul...rocool_009.JPG
Not bad eva.
Things are running much smoother today.
I took of the spreader and I gained 100MHz so far and a good 17C of cooling thanks to the better contact.
See if I can't stablize this sucker at 3300MHz.
OPP
http://www.xtremesystems.org/forums/...id=39740&stc=1
Quote:
Originally Posted by OPPAINTER
nice improvement!! Throw her on ice!!
C
:woot: I'm good :cool: (I had that IHS thing figured out from the start...lol :p: )Quote:
Originally Posted by s7e9h3n
Nice looking chip there :woot: What do you think it can do on cascade or SS if you have one?
3.2 is pretty damn good for watercooling.
Though I must admit that its totaly not worth the extra cost over, say a 146. For the price of this cpu you could get several 146's and out of that batch, almost be garunteed a great clocker. And besides you'd have a few extra chips to mess around with too.
BUT if you get a 154 for free, then who's complaining ;)
3D proofed at 3250 MHz using 1.63V.
The Max temps I've seen are only hitting 33C so far, a far cry from yesterday's 48C and less voltage.:D
OPP
Amazing results on H2O Opp....
:cussing:
I was content with 3100 with a temp wall. You have now convinced me to rip off the IHS.
How come cpu-z shows a bugged reading for vcore in your screenies? Does it ever give the correct reading?Quote:
Originally Posted by OPPAINTER
I'd say 3.1Ghz @1.45v on air :D :D
3250 is more than i hoped for, when will it meet coldness?
It always reads 1.4V, with this DFI crossfire board anyway.Quote:
Originally Posted by s7e9h3n
OPP
My Expert mobo just arrived, I'm gunna dress her up and then I'll use it to mount the cascade on this CPU.Quote:
Originally Posted by Zeus
I'm hoping for a miracle that it doesn't have a cold bug.
OPP
All of us are hoping she loves the cold to :toast:Quote:
Originally Posted by OPPAINTER
Can you please take some pics for us and if it does not like the cold so much do you have a light version such as a single stage you could strap on?
Thanks
Tim
I have no single stage. I could go one notch down from the cascade to Dry Ice though, If I have to.
OPP