I sent Rodzilla a PM...Quote:
Originally Posted by bullet2urbrain
Printable View
I sent Rodzilla a PM...Quote:
Originally Posted by bullet2urbrain
I cleaned it up and put more stuff in the Start here sticky.
Check it out and let me know if anyone has a problem with my trim (All complaints will be forwarded onto the mafia to be "handled" :D )
Nice work man :up:
I now have 3 threads in that sticky :woot:
Honestly... you make some very high quality threads... sorry we all keep crapping in them ;) :DQuote:
Originally Posted by Korpse
We need to keep this updated, though...
Myself, DDTUNG, Entity, and saaya do that. If anyone wants something added just PM me and I'll check it out or just mention it in the thread. I'll make it a point to add good threads with usefull info myself as they pop up.Quote:
Originally Posted by Martijn
Opeteron 146 @ 2.8ghz (10x280, 3-4-4-8) does ~ 106 day.
(I don't know how accurate it is b/c its on dial-up)
Athlon 900mhz does 40 day
My celeron lappy wouldn't be very accurate either b/c its not on 24/7, so its only doing 10 a day.
it probably would help to say what x2 it is like 3800+ or 4400+ and so on
and also on the intel side wether its a d820 or a p4 560 or what it is
:toast: for a good thread
I retract my previous post....
As for my PCs, Rod has covered them with his results; I will post anyway though.
Dual 2.4LV D1 @ 3200 ~300/day
p4 2.4c @ 2.0 ~100/day (yes, it IS underclocked; too lazy to get a mb that really supports 200fsb)
-lvd
ok my x2 3800+ @ 2.7gh does 280 in a 24hr period
my 3000+ @ 2.6 does 135 in a 24hr period
will give results tomrrow on my dothan laptop @ 1.6
330 was my original measurement, i was doing some buffering however and i measured myself over another 24 hour period (3:30 PM yesterday to 3:30 PM today) and i clocked off exactly 365 cands! I'd say the average for my CPU should be around 350/day, and this is with me using it.
Hmmm....apparently my previous post was overlooked.
2.4GHz Celeron D - 72/day.
What are the detaild of your cpu so we can add it??Quote:
Originally Posted by Absolute_0
Is your opteron a dual CPU setup???Quote:
Originally Posted by WesM63
Quote:
Originally Posted by Mr_Slinky
Quote:
Originally Posted by Vapor
Quote:
Originally Posted by WesM63
Added
I want to get some more X2 and P-D scores put up on the list... come on peeps!! post em up! :up:
my x2 @ 2.5 ghz... does ~225 a day.. because of use and CS:S ..
this is with RAM 1:1 @ 2.5-3-3-7
We need more "accurate" 24/7 results.
For those of you who are taking reading off of non 24/7 rigs or rigs you use day to day... Go and look at the output history of your rig and see if you can find something more accurate... like take note of a couple high output days from the rig in question.
Here is how I would go about this...
I have Rig X... it's running a P4E with HT.
It has node numbers 111753, and 111754
I would use the team Norway node stats to get a look of the output history up to month back.
Here are the Team Norway stats for these 2 nodes.
111753
111754
Even if i use this rig quite a bit I can still find a day where it was left alone to crunch D2OL... or was only used a little.
And if it's only used for D2OL 24/7 these stats pages provide a handy weekly and monthly average of the nodes production.
All of my new nodes use the same node.prp I dont create new ones.
My 2.8 M0 HT xeons at 3.05 Ghz 24/7 (mostly except for time gaming) running 2 d2ols (my 'daily driver' dont want to fry it, runs close to 60C on vrms) gets between 220 and 300 a day, 300++ ?? IF I can leave air conditioning on and run 4 d2ols :mad:
I picked up a P4 LGA775 2.66 Ghz 1Mb L2 , no HT, 533 fsb :rolleyes: (right?)
$140 Canadian retail, $100 ASUS P5P800 board
I have it at 3.2 Ghz now with stock HS/fan/paste, 2 x 333 Mhz dc ddr
Seems stable with d2ol on it, leaving it on overnight to test
SAYS! *clockable to 20 x 200 fsb* 4.0 Ghz :D
Dont know what will happen when i crank it up higher, but Ill find out :D :D
Well, obviously it will make more cands. Always worth a shot. I found an athlon k6-2 500mhz whole system under my bed yesterday! Forogot I put it there. I have it mostly set-up, just have to load an OS. Unfortunatly, the floppy controller doesnt work, so in order to check with memtest, I have to burn it to a cd.Quote:
Originally Posted by gearhead
Well, I have a celly 300mhz that im going to setup, anything helps right? Trying to find a slot 1 p3 for it :rolleyes:
Or it could crash and lose all my cands or fry itself.........or..........Quote:
Originally Posted by moddolicous
Here we go:
Dothan @ 1.4ghz 256mb ram @ 100mhz 3-3-3-8. Not running on this comp, just thought you would see how it would do if I did load d2ol on this:
http://img512.imageshack.us/img512/8...ench8dg.th.png
MikeEPuter (10x270 Opty 170 )= 137 + 140 or 277 (hey I use this machine so:cool: )
MaryPuter (10x280 Opty 170 ) = 183 + 159 or 342 (Only the best for my Wife! :D )
Indabsmt (10x270 X2 3800) = 144 + 159 = 303 (Unsung hero quietly working indabsmt :sonic: )
:fact:
opty 170 10*271 = 141 + 139 = 280
opty 165 9*292 = 130 + 139 = 269