Congrats :toast:
Printable View
Congrats :toast:
With What tool are u guy's getting that 700 MHz core clock ? i got 575-550 max :\
Astennu who makes your x1800xl? not x800
What do you mean ? I got a Sapphire X1800 XL card. That Trixx utility aint working because i don't use the sapphire drivers. I got the 5.10a from ATi. But CCC is limmeted to 575-550.
Give this a try from driverheaven http://www.driverheaven.net/showthread.php?t=88559
We all using the one off driverheaven. ^^^ link above.Quote:
Originally Posted by Astennu
Don't worry its safe.
@ Fugger, lol, already broke the damn card :eek:
That is what I liked to hear, All cards seem to be standard. I say this because locally I can only get Sapphire cards and nothing else yet all these high overclocks are mainly from BBATI cards which left me wondering if Sapphire cards can overclock well at all. I am loving the sound of 630+ core stable and artifact free with 1.225v. If I can get a card like this I would be quite happy. 775 on the mem with stock volts is sick as well.Quote:
Originally Posted by mR Yellow
Check my post, mem volts wasn't stock. Volt had to be bumped up a little but this aint a problem. These cards need more volts anyways ;)Quote:
Originally Posted by cantankerous
Volt them up and see them fly. I think anything up to XT speeds is safe. I don't know whos gone higher?
Lol something gous wrong. I cant set higher than 525-509. And cant use the 3D clocks button :S. Strange :banana::banana::banana::banana:.
I'm running the ATi 5.10a drivers anyone that can help me ?
try using the omega version of those drivers. I see a few people using those with no issues. I think 5.11 betas are floating around too you can try.
I see these cards available on the net. My question is, is there no mastercard for these XLs available or are they mastercard ready?
OPP
Ok i will try those then.
But i have set my clocks to 600-600 in 2d mode only now the overdrive tab on CCC is blank :D cant see if the clock speeds are realy set on 600-600 :)
Nice one Fugger. First to break an x1800XL ever I bet.
No, no mastercards available for the x1800 cards yet.
If you are in Canada:
http://www.ncix.com/products/index.p...0&promoid=1008
$479!
if you are in the US:
http://www.us.ncix.com/products/inde...0&promoid=1008
$390!
Grab em while they're still available.
There is no X1800 master card at this time. The Master card when it comes out will be a X1800XT master with duel slot cooler. From the specs going around, it looks like a 600mhz core and 700mhz mem.Quote:
Originally Posted by OPPAINTER
The X1800XL will slave to a X1800XT master.
http://www.beyond3d.com/misc/chipcom...details&id=283
Not that you need the mastercard to bench in xfire mode ;) Just need the drivers to enable it and boom, two non-mastercards can get an amazing score. However, real world gaming performance is minimally increased, and it skips frames, and can only be used in AFR xfire mode. Meaning its only a temporary solution if you buy two non-master cards. But yea, ALL PCI-E X1800s are "crossfire ready", mastercards are "crossfire editions"...main difference is the compositing engine. More here:Quote:
Originally Posted by SnipingWaste
http://www.xtremesystems.org/forums/...5&page=1&pp=25
Though they'll most likely release the mastercard before end of 06...hopefully :(
Perkam
What version of ATi tool are u guy's using to change the voltages ? I got the latest Beta from there forum thats 0.25 Beta 8. But that version dous not have that function.
I will remove my XL cooler soon. I Hope my Zalman VF700 can let te core run on 1.33 v settings. But i don't think i have got A OC miracle. I think its one of the bad cores. I'll make a pic of the core soon.
u gotta use the tool from driverheavenQuote:
Originally Posted by Astennu
http://www.driverheaven.net/showthread.php?t=88559
and for a strange reason only some people have gotten the new ATI beta tool that supports the X1800.
oh and im sure ur card will OC great once you set the fan control to 100% with the above tool.
Get the overclock tool at driverheaven and you will have full control over the clocks and voltages.Quote:
Originally Posted by Astennu
Get it Here
gunit beat me to it
I have got the tool but i did not set the fan To 100% because of the noice i had it on 5k2 RPM 5k8 is the max. I will try that 100% fan tomorrow.
I hope ATi Tool or ATi Tray tools will support Fan control temp and clock speed and voltage adjustments soon. I would like to make profiles that can be loaded @ startup :)
Quote:
Originally Posted by Nunyabiz
hey nunya, i see you in like 50 forums, lol!
big ups to that my friend. Here is hoping for an update to ATI Tray Tools in the next Omega drivers that allows us to do just that. I would love to make profiles as well.Quote:
Originally Posted by Astennu
yeah I am starting to get around like a cheap whore at a high school party. :banana:Quote:
Originally Posted by gunit
here you can also download the ATI OC utility
http://www.techpowerup.com/downloads/89
Im using ATI Tool BETA 9. U need to ask Wizzard for this. Its on a request basis. Im sure ur card will OC just fine once u have the right tools. ;)Quote:
Originally Posted by Astennu
BTW The link of the OC tool on driverheaven is updated to a newer version.
Get it again and don't worry about 2D mode, mines also greyed out.
so far, using zalman copper sink for cooling i'm able to run through 3dmark at 650/700, turned it up to 675/750 and it ran for a bit but then it crashed to desktop with driver dying aswell. didn't artifact at all though. both were at 1.3v/1.9v , trying 675 again but with 1.35v and 2v mem. temps seem to be about 50c idle and not heat up all that much during benching.
EDIT, just did 689/800 1.375v/2v and got 9215 score. running 2gig cheap cruicial and 4400X2 which are both , right now, clocked very conservatively. 2.35Ghz/235Mhz 3,3,3,8. dropped some speed since i went to uni and left watercooling at home. winters coming though so should be able to push that up again, will play around with that later. no arties with that run , feels like it has way more in it.