New WR DDR636 2.5-3-3-5 1T PI 32M

Printable View

Show 100 post(s) from this thread on one page

10-22-2005, 06:49 PM
Eldonko

Great job on the mb mod AndreYang, and congrats on WR. :clap:
10-22-2005, 08:22 PM
harleybro

Very cool and very clean job on the cap replacement. Have you run that ram on the same mobo before the replacement? If so what kind of improvement did you see?
10-22-2005, 08:32 PM
AndreYang

Quote:

Originally Posted by harleybro

Very cool and very clean job on the cap replacement. Have you run that ram on the same mobo before the replacement? If so what kind of improvement did you see?

Yes, i run the same mobo before replacement.But it is only running 314 FSB.
10-22-2005, 08:48 PM
en4cer

what rev. TCCD is that 4xx, 5xx??
10-22-2005, 08:56 PM
AndreYang

Quote:

Originally Posted by en4cer

what rev. TCCD is that 4xx, 5xx??

519 TCCD
10-22-2005, 09:22 PM
en4cer

wow, those must be pretty new, Mine are 513 and they also clock to 300MHz+ 2.5-3-3-6 :D

Congrats on the WR :toast:
10-22-2005, 10:20 PM
AndreYang

Quote:

Originally Posted by Mike6969

I guess it is not required to have a 24pin psu to achieve great rusults on a DFI N4 mobo. What brand/wattage psu are you using andre yang?

http://www.athlonoc.org/forum_r4_new...414_60f_01.JPG

http://www.athlonoc.org/forum_r4_new...414_60f_02.JPG

http://www.athlonoc.org/forum_r4_new...414_60f_03.JPG

http://www.athlonoc.org/forum_r4_new...414_60f_04.JPG
10-23-2005, 12:40 AM
Zeus

Awesome job on replacing those caps, gaining 4 MHz RAM speed may not sound great but it helped to take the WR this time. :up:

So cleaner current is the answer for higher clocks, this must be the reason why you get such awesome clocks on your Opteron.

Are your RAM sticks handpicked or just retail ones?

Btw, very nice way to prove you really ran 318, this way there's no doubt.

:toast:
10-23-2005, 07:11 AM
AndreYang

Quote:

Originally Posted by Zeus

Awesome job on replacing those caps, gaining 4 MHz RAM speed may not sound great but it helped to take the WR this time. :up:

So cleaner current is the answer for higher clocks, this must be the reason why you get such awesome clocks on your Opteron.

Are your RAM sticks handpicked or just retail ones?

Btw, very nice way to prove you really ran 318, this way there's no doubt.

:toast:

Handpicked.

I think some people run DDR 630+ 2.5-3-3-5 are not Retail.I am very sure.
10-23-2005, 07:28 AM
kakaroto

Quote:

Originally Posted by AndreYang

Handpicked.

I think some people run DDR 630+ 2.5-3-3-5 are not Retail.I am very sure.

Indeed, handpicked is more likely.
You have to be very very lucky to get such great TCCD in retail :)
10-23-2005, 07:53 AM
GhostBG

Quote:

Originally Posted by AndreYang

Handpicked.

I think some people run DDR 630+ 2.5-3-3-5 are not Retail.I am very sure.

Are yours retail?Because i realy doubt you've removed the heatspreader to find out IC stepping
10-23-2005, 08:00 AM
AndreYang

Quote:

Originally Posted by GhostBG

Are yours retail?Because i realy doubt you've removed the heatspreader to find out IC stepping

My TCCD is not retail.

ES GeIL One

http://andreyang.myweb.hinet.net/GeIL-330.JPG
10-23-2005, 08:33 AM
Rukee

I have a set of OCZ`s that will do 319fsb but not at 2.5-3-3-x. :( At least not yet, still tweaking.
10-23-2005, 08:41 AM
ZeroX

Many people have +330 2.5-4-3, and some 2.5-3-3, but 3-4-4 is too far..
10-23-2005, 08:42 AM
Rukee

/me hanges head and goes back to tweaking
10-23-2005, 10:28 AM
guess2098

Andre nice job, hahahahaha
one handpick beats all 20 pairs we bought!!!!!!!! or 23 pairs??? don't remember
hahahahaaha
10-23-2005, 11:44 AM
AndreYang

Quote:

Originally Posted by guess2098

Andre nice job, hahahahaha
one handpick beats all 20 pairs we bought!!!!!!!! or 23 pairs??? don't remember
hahahahaaha

maybe 30 pairs........... :D
10-23-2005, 12:04 PM
AndreYang

Quote:

Originally Posted by Mike6969

Andre Yang , whats the purpose of these pic you posted? I wanted to know what psu were u using on setup u posted on the first page? It shows that u was using a 20 pin connector , am i right or wrong?

This psu have 24 pin connector.I use 24pin connector for my mobo.
10-23-2005, 12:21 PM
Vapor

....maybe he took the pictures some other time, you know, just to show off the mod? :rolleyes:
10-23-2005, 12:21 PM
AndreYang

Quote:

Originally Posted by Mike6969

AndreYang , look at the pics u posted on the first page, u will notice that its using a 20 pin white connector , so it CAN'T be the silverstone because it is a black 24pin connector. I got high last night but im not high right now i know what im talking about.

The first pic just demonstrate.

This pic is really testing.

http://andreyang.myweb.hinet.net/318-TCCD/12.JPG

http://andreyang.myweb.hinet.net/318-TCCD/13.JPG

http://andreyang.myweb.hinet.net/318-TCCD/14.JPG
10-23-2005, 06:17 PM
ahmad

Very nice!

I managed 310MHz with my OCZ TCCD but only with 2.64v. I didn't go any higher because I don't want the sticks to die too quickly.

Am I over worrying or is 2.8v an OK voltage for TCCD? Heard some wrecked their sticks with more than 2.7v.
10-24-2005, 04:38 AM
formyfaith

Quote:

Originally Posted by AndreYang

Handpicked.

I think some people run DDR 630+ 2.5-3-3-5 are not Retail.I am very sure.

You're right. ;)

Recently I tested 15 pairs of the new HS versioned G.Skill FF
, and all of them really :banana: :banana: :banana: :banana:.
(half of them can't even do above 275 Mhz @ 2.5-3-3-7, and the rest
doing around 280-285, 1 set does 290)

Gotta be real lucky to get a nice pair.
Maybe I'll need to test 10~20 more pairs. :p:
10-24-2005, 05:07 AM
kiwi

What about retail GEIL ONE 5xx? Can we expect at least 300 2.5-3-3-6 on average?
10-24-2005, 05:09 AM
Vapor

Doubtfully.
10-24-2005, 05:16 AM
LoKi2k

alright andre, i am going to get you today. my gskill 4400le can run 320 2-hours prime blend ;)

Show 100 post(s) from this thread on one page