hmmm...look what happened while I was busy editing my post...:)
OPP, how long before you really start cranking it up?
Printable View
hmmm...look what happened while I was busy editing my post...:)
OPP, how long before you really start cranking it up?
Hey,
Any wpcredit tweaks to get the Idle temps (halt) down on this thing??
Thanks,
OPP
I have about an hour I think before I start to really bench 3D.Quote:
Originally posted by BrainStorm
hmmm...look what happened while I was busy editing my post...:)
OPP, how long before you really start cranking it up?
OPP
With my HyperX and 8RDA+ I can bench 3d at 226FSB 4-2-2-2...But only with 10x multipler, I'm sure you can run that high and with a multi of like 12.5x, which would yield veyr nice scores :DQuote:
Originally posted by OPPAINTER
I just hope the I can keep going up with the FSB.
OPP
See everyone around 6:00 or so CST...:DQuote:
Originally posted by OPPAINTER
I have about an hour I think before I start to really bench 3D.
OPP
OPP, could you quote your required Vdd as you keep going up in fsb. Just curious what you'll need for Vdd to complete your 3D with a watercooled NB...Quote:
Originally posted by OPPAINTER
I have about an hour I think before I start to really bench 3D.
OPP
Thanks.. :D
Well i'm rock solid at at 215 right now, I will need about 500 more point's to make a 21000 3D run.Quote:
Originally posted by AKRedneck
OPP, could you quote your required Vdd as you keep going up in fsb. Just curious what you'll need for Vdd to complete your 3D with a watercooled NB...
Thanks.. :D
Some cooling action.
OPP
What's the best bios? C16 or the new C31?
What's your AGP?
Opp, compared to NF7, which one is faster clock for clock ?
Thanks :)
Well Im not Opp but I beleive the NF7 is faster clock for clock, in 3D anyway :). But the voltage isnt as good as the epox goes to 2.2VCore, and the high FSB-end doesnt have as many adjustments (like, 100-200 in 1 increments, above that its different points like 210 215 237, but i dunno the specifics)
Opp,
Keep up the good work :thumbsup:
Are you going for the vdimm mod too at some stage? as I take it your maxed out at 2.9 in bios with that 2.86?
make the vdd mod opp!!!
bevore my max stable dual channel fsb was 215, now i'm @ 225 and going;)
But rev. 1.0 only up to 1.9 V is usable!Quote:
epox goes to 2.2VCore,
I'm stable now at 13x220, 5-2-2 timings, agp is at 1.8.
To get here I had to up the VDD to 1.89 from 1.8.
I'm useing the C16, and I havn't done a mem mod yet.
How high do you guys go with the VDD voltage??
OPP
I had my VDD at 1.92v with the stupid stock heatisnk with a fan blowing accross...I could feel it get warm but nothing too serious at all :)Quote:
Originally posted by OPPAINTER
I'm stable now at 13x220, 5-2-2 timings, agp is at 1.8.
To get here I had to up the VDD to 1.89 from 1.8.
I'm useing the C16, and I havn't done a mem mod yet.
How high do you guys go with the VDD voltage??
OPP
OPP I wouldn't go much higher than this, 1.9V maybe.
DDTUNG:cool:
Yea I was thinking that.Quote:
Originally posted by DDTUNG
OPP I wouldn't go much higher than this, 1.9V maybe.
DDTUNG:cool:
I'm at 223 now, I have to test it for 3D.
OPP
Vdd of 2.0v here.. No problems so far after a couple days.. Nothing glowing.. Had to do this to get 3d runs at 220. And my NB is aircooled. I think it's hot but 'o well', it works!..Quote:
Originally posted by OPPAINTER
.. How high do you guys go with the VDD voltage??..
OPP
We know your not scared OPP..lol! :D
I think i saw some one in the VoltMod forum who managed to melt a chip running a 2.0vdd.
From what i've heard 1.9vdd is about the best.
TAKE CAUTION - I AM A n00b
Opp,
What does the MBM high/ low screen look like after a 3dmark run?
2.9ghz and 223FSB! Man I thought 12.5 multiplier would be hard but that should turn out great, better than the NF7 me thinks ;)
This is certainly getting interesting...hope it's stable enough for 3D :)
I'd love to see you get it up another few MHz. Try and grab the #1 spot for AMD :banana:
Looking good man. You should be able to push that processor to 2.15v easily. Mine handles it no problem with straight water. I'd like to see you post a 3g score on AMD 13.5x223 mmm . :toast::slobber: