could some1 answer my question if it would be possible, please
Printable View
could some1 answer my question if it would be possible, please
I honestally havent seen much success from Ballistix. If you are looking for an overclocking set of RAM sadly the only way you can gaurntee it is by buying pre-binned ram. aka the PC4000 we have.Quote:
Originally Posted by blarf
Here's a whole lot of success from Ballistix: http://www.xtremesystems.org/forums/...ad.php?t=67762. They're taking the top 10 highest stable clocked ranks.Quote:
Originally Posted by Sentential
tsk tsk.. the 1gb Ballistix is PC4000 too :slap: :DQuote:
Originally Posted by Sentential
and.. the non binned crucial, the value, does surprisingly well most of the time. i have a stick that does 263mhz at stock timings, 2.9v
OCZ also has pre-binned pc4000 1gig sticks. the use Samsung UCCCQuote:
Originally Posted by Sentential
I have a couple of crucial value and I can't get over 235 :( at least on amd. On intel I can get 240+ so not sure why :stick:Quote:
Originally Posted by ozzimark
re: ocz selling the same, yeah I think these would be about same as theirs, I would go with whatever is cheaper between the two ;) :fact:
they are now available at newegg for $320
http://www.newegg.com/Product/Produc...82E16820146397
fwiw - I was able to rma my HP3200 2gb kit and upgrade to the XP4000's. I'll be getting them this week and will report my results.
i find it's very sensitive to the memory controller. on my clawhammer, the stick only does 250mhz. is that ~235mhz number with two sticks at once? try with one :cool:Quote:
Originally Posted by JNav89GT
little update
bios tweakage and i'm going up
near limit of my cpu so here's a 1mb shot
I'll have to back the cpu down for further stunts ;)
i need your help, i PMed u on mushkin. i would love to tweak those sticks also but i don't know where i should start. could you help me overclock??Quote:
Originally Posted by JNav89GT
wow 280 32m stable
didn't think the cpu would do it ;)
alpha cool seems to take the cpu a bit higher than my Corsair Cool ;)
http://valid.x86-secret.com/cache/37539.png
http://www.xtremesystems.org/forums/...id=36931&stc=1
sure here's the A64 tweaker shot
http://www.xtremesystems.org/forums/...id=36932&stc=1
what volatage do you use for the memory? any idea on what bios i should use for the dfi nf4 ultra-d and a venice 3200+? what slots should i put my sticks in yellow or orange???
by the way, that some great clocking right there....congrats.......i;m so jaleous........i'm still at 250 cuz i have no idea what to do to overclock them sticks.........
run 3dmark05 and sp2004 together and see if it will pass.
2.7v +0.03v option
I'm using 510-2 I think
http://valid.x86-secret.com/show_oc?id=37552
http://www.xtremesystems.org/forums/...id=36933&stc=1
lower your tras.
I took this exact ram to 300 at 1:1 with a tras of 12.
lowering the tras, dramatically improved the OC ability of this ram for me. ;)
will try ty :)
At what major timings Kunaak? 3-4-3 or 3-3-3?Quote:
Originally Posted by Kunaak
Peace :toast:
Nice jnav. Can u post an a64 screenie?
see aboveQuote:
Originally Posted by moddolicous
http://www.xtremesystems.org/forums/...id=36932&stc=1
hey,Quote:
Originally Posted by JNav89GT
i can't get nuttin out of my sticks, could you hepl me tweak my settings for me to get a little but more out of my pc4000 kit?? if not, i'm thinkin about sendin them back and gettin some crucial ballistix
define your problem, "getting nuthing" doesn't tell me what u've tried or done or anything about ur setup ;)
Blarf, JNav89GT's screen shot gives you his tweaks and settings.
i dunno why my sig isn't posted.....i saved it.....dfi ultra-d (nf4) and venice 3200+........
[IMG]http://i11.photobucket.com/albums/a168/blarf_/boot.jpg[/IMG]
ps: i'm using the 7/04 2BT bios and i'm at 10x250 (1:1). i tried increased voltage, changing some setting but always got errors at memtest.....where should i put the drives strenghts at??? should i leave my sticks in orange slots??