Zeus just beat me by a sec or two LOL
http://www.fileshosts.com/DFI/NF4_SL...rpi-32m_tn.jpg
Printable View
Zeus just beat me by a sec or two LOL
http://www.fileshosts.com/DFI/NF4_SL...rpi-32m_tn.jpg
Yeah, and 6MHz less. :D
A little contribution from the Intel side. A bit behind FUGGER but not too much. P4 670 @ ~5.3 Ghz cooled by a regular Mach II GT in an unmodded Asus P5WD2 Premium motherboard. I'm having heat problems beyond this speed, but IMHO it's still not too shabby with unmodded single stage phase-change cooling. Fsb is 378 Mhz (air cooled), memory is 4 blocks of Corsair PC5400UL @ 473 Mhz cas 4-3-3-8
21 m 19.328 secs, pic can be seen here
I have posted it some time ago in my TCCD thread, but I can throw it in here too ;) My best 32M so far...
Not bad for SD 3700+, I guess :)
21:37.969 @ 308x11=3388MHz DDR564 6-3-3-2.5-1T 1.80vcore/3.04vdimm
Here is my opteron CABYE 0528 GMPW
-T.ambien 24,5C (roomtemp)
-Watercooling (no chiller )
i made a 32M run 100% stable evry time at 3100mhz heres a mu result at 3110 mhz :
23m 18,281s with spi 1.4 non sse3
i might be able to reach 3,2 ghz just by opening the window :D
My 32m time.... should be a lot faster. I need to tweak those timings more.
According to some I should be 20sec faster at this speed....
http://www.jpop.com/gocchin/gocchin2039.jpg
Asus P5WD2 Premium P4 670 with Dryice
http://paakkis.oc-papat.com/2020.gif
Here's a better time from last night's session:
http://www.jpop.com/gocchin/gocchin2015.jpg
The good thing is I can run two of these at the same time and still hit 26 min 30 secs each :) Here is an X2 4400 and RAM is maxed out in bandwidth.. chk sig.
http://dpgjr.mstooling.com/4400OC/SPI32.jpg
Wait, I only see one spi open. Are you sure you're running 2 instances of spi at the same time? If you only have one screen open, that means only one of the cores is running the benchmark.........Quote:
Originally Posted by cyberexia
Dude that's only 1 x 32MB PIQuote:
Originally Posted by cyberexia
Possible to run 2 x 32MB with a screen shot?
I'm having a hard time running mine @ 2 x 32MB PI with my Toledo :dammit:
Improved again, got under 23 minutes now:
http://img.photobucket.com/albums/v6...2M22target.jpg
Max with 1.67v on cool water. [IMG]http://img184.imageshack.us/img184/2...24731561pv.jpg[/IMG]
An update
http://img296.imageshack.us/img296/4...32pi0ov.th.jpg
GeIL ONE TCCD modules
Nice one ncsa m8. Just put me VX back in (coldboot so have to be careful otherwise have to wait for 8+ hours......). 32M likes the extra 512 and bank interleave though.
http://img.photobucket.com/albums/v6...M3350small.jpg
148 op with 256's wc'ed 22.14 @ 3278mhz [IMG]http://img426.imageshack.us/img426/1...22143lz.th.jpg[/IMG]
Nice sub 20, grats
Stock cooler, 24/7 stable.
http://home.comcast.net/~gautamb/32m.JPG
LOL...that's just not fair....maybe I need to try a dothan on my autocascade....:p:Quote:
Originally Posted by Gautam
http://img243.imageshack.us/img243/4...x26232m4bl.jpg
My ex-Opteron 146 CABYE 0540FPBW with TT BT and -1ºC AIR:D
http://koti.mbnet.fi/dani69/DFI%20nF...s_1.7V_AIR.gif
Opteron 146 @ 360 x 9 Vc 1,61 V / OCZ VX @ 249 MHz 1.5-2-2-5 Vdimm 3,52 V / Water
Weather and water is getting colder...:D
22 min 50.891 s
@Dani, very nice!! Compliments on your chip and your skills. I had a same type chip and let it go. I did not spend enough time with it. :( So far this is the best I can get with my 148 [IMG]http://img521.imageshack.us/img521/7...132m7un.th.jpg[/IMG] and a 1m [IMG]http://img521.imageshack.us/img521/8687/251710bd.th.jpg[/IMG]
Mem freq is too low here. :(
http://members.aol.com/jonpaletta/clocks/32mpi.gif