Im now messing with the DFI 939 NF3 mobo and its like a bad joke right now. In the state its in I could not take it over my msi neo2.
Printable View
Im now messing with the DFI 939 NF3 mobo and its like a bad joke right now. In the state its in I could not take it over my msi neo2.
I know what you mean, its like the techi version of getting PUNK'd, that damn ashton got me! :DQuote:
Originally Posted by Nettwerk
another vote for abit for their stability
Bul***it, many people have done the mod without having any problems.Quote:
Originally Posted by GMX
I run it 24/7 @3.5vdimm since I got it, and it´s been a while - rev1. It actualy clock better with cpu than the DFI UltraD I got - I´m not alone to have experienced that.
Stable @fsb320, didn´t try higher in stable.
Only problem: dividers 150 188 lacking, for ram timing you have A64 tweak ;)
The MSI just clock everything lower.
The GByte seams preaty good as well but I never got it.
How about ULi 1695 chipset?
capable running PCI Express x16 , AGP x8 & PCI graphic card.
And a processor slot that would allow for AMD M2 upgrade... :banana:
http://www.xtremesystems.org/forums/...01&postcount=4
Yup, the same here like KoNiaK with Rev 1.0 ;)Quote:
Originally Posted by KoNiaK
BTW, either Rev 1.0 or 2.1 is the best 939 nF3 M/B among Team Japan :D
You should just buy the 9nda3j, neo2, and dfi, see which one you like the best!
ad GByte ;)Quote:
Originally Posted by swiharta
Now whats the differrence between MSI K8N neo2 Platinium and the Platinium 54-G version?
If its possible to get the EPoX in DK to a fair price ill be up for that...
#32 yeah, it would be nice if we alle just started crapping money..
I would buy GByte before MSI, even if I never tryed it I know some people who aren´t overclocking beginer who were happy with it - culloverclock for instance.Quote:
Originally Posted by Mr.Don
I manage to find the 9nda3j and a Venice 1.8Ghz i Germany 20-25% cheaper than here in Denmark.
265$ for both inclusive shipping, but ill have to wait two weeks before it will arrive - Its only possible to pay through bank transfer, and somehow it takes the banks in denmark and germeny 1 week to transfer the money. (That i currently dont have :p) But they will come...
Toll ;)
Germany is the european heaven for computer parts :D
What exactly does that one resistor do that causes problems?Quote:
Originally Posted by purefun65
After doing some more research on this, I don't think it really matters (i.e. this does not seem to be the cause of the problems people are reporting). Actually, I think it only matters if you run a ridiculously high Vcor (like 1.9v + I believe).Quote:
Originally Posted by ElAguila
Either way, I'm sure DFI will sort it out - at least I hope they do. Maybe a MB revision is needed or major Bios overhaul.?. .. Of course, with the market focusing so much on PCI-E and SLI, IMHO pretty hard to justify the allocation of resources to work on this -- from a business standpoint anyway.
i have an epox 9nda3j.
regardin OC: currently running 280MHz with 2x512 TCXX corsair pro RAM, 1:1, and a week 17 venice 3000+. timings 2.5 4 4 8 2T. this board doesn't like 1T with my samsung chips :(
for ppl looking to buy this board, also check the ultimate s939 guide, not sure if it is updated, but there are some posts of mine there, regardin XP-90 and memory with heatspreaders...more specifically, it will get scratched by that wretched xp-90, if u put the heatsink with the heatpipes torwards the parallel port.
the fan thing...it is a b****. but i'm a bit concerned with noise, so my opinion might be more focused on that then other ppl.
my board undervolts cpu by .25 and .5 but it's ok, my temps are fine and the cpu runs at 1.286 @2500Mhz..i'm happy.
also it overvolts Vagp..at least my model, i have 1.7V, when i set the value in bios to 2.6V..must be a stupid glitch.