Printable View
Quote:
Originally Posted by =[PULSAR]=
Pulsar, the problem with the EGG is it ships from 3 different warehouses depending on our regional location. I live in nyc so I get shipped crappy cpu steppings from their New Jersey warehouse every time. Where'd you get your cpu shipped from, CA, TN OR NJ, thanks.
NJ :banana:Quote:
Originally Posted by Deus Falsus
If you order it just do the CPU, if they have everything you want at the closest location thats where they ship it from...BTW I'm from CT.
Those of you praising week 15.. Out of 3 3000+, the BEST was 2.7 GHz @ 1.7V and the worst was NOT stable at 2.6 at any voltage.
well my week 15 does 2.7 primestable with 1.36V so in general week 15 are pretty good.
IvanAndreevich, what were the exact steppings of your 3 chips? Sounds like you got really unlucky... or maybe week 15 is only a good week for 3200+s and not 3000+s.
i got a week 15 today thats prime stable at 2.5 ghz with 1.4 vcore and i havt really played with it yet. Boxed air and it seems to be working really well. Going to try for 2.6 tonight.
Week 15s are nice be happy you got it :D Although like said above maybe only for 3200 chips, who knows :slap:Quote:
Originally Posted by Super strokey
LBBLE's they were. The other part I do not remember
However, a 4th chip of the same type did 2.7 @ stock volts :) My friend is using it now.
3000s 0515 FPDW that I have seen do about 2,5G with stock vCore.
3200s 0515 FPBW seems to do a bit better, as do the APAW (absolute_0), mine 2700 with 1,39v.
Only drawback for me is temperature. Where I lives (spain) we are actually at about 28º ambient. In my room with the air conditioner at 24ºC I'm getting temps of 46ºC full load with my XP90 at 2745@1,42v. I've seen that when surpassing 53ºC CPU becomes inestable and crashes with a BSOD. This happened me when testing with 1,52v at 2750mhz, temperature go to 53-54ºC and in about 30minutes system crashes. Same speed at 1,42 is 100% stable at about 46-47ºC :):):)
I could think of getting a RL system to xplode all reserves of this chip, but with 2750 I'm totally pleased, my old winchy 3000+ can't do even 2400mhz with 1,65v
salu2.
I have a 0515 3000 FPDW (0513) and it´s full stable at 2727(303*9 with 166 divider 2-3-3-6 ocz rev2 tccd) with 1.52v...
I think that it´s stable with less volts, but I need the 110% because I use the cool´n´quiet (at 104% isn´t stable).
I have problems with my tccd and the controler. It doesn´t work fine at 300*9(1:1).
My temp after 8hours of prime95 is 47ºC with a zalman 7000b-cu and 25Cº of ambient temp.
Sorry for my horrible english.
It's interesting that people with earlier weeks keep chiming in, given the title of this thread. :)
3000+ 0520APMW
2850@1,45V Primestable
2900 non testing
My venice 3000+ 0520 BPCW
Very BAD :confused:
http://www.unlimitpc.com/news/panumas05/Clip_50.jpg
got some screens because thats good, i mean really good if 1.45V is primestable.Quote:
Originally Posted by tbonekot
after reading all the 3 or so posts about week 20 venices, i amd concluding that 20s are about the same as week 16s. 16s usually hit about 2.7ghz @ 1.6v on average (give or take) which is acceptable...but certainly no 17.
I got 2709mhz on 1.55v 3000+, week 20, full stable with prime95
http://www.forumdeluxx.de/gallery/da...33000_2800.JPG
my latest screen, I have.
tomorrow I make one from 2850
I wish I had not read this. I see NEgg has 3000 retails for $147 shipped so I think I live in GA so I should get one from NJ. WRONG, It's coming from CA so you know it's going to be a new stepping.Quote:
Originally Posted by =[PULSAR]=
nice results tbone! keep pushing it :up:
Pumbaa - could we please have some more info on your stepping and maybe a screen?
Here's that mine. Not too bad huh?Quote:
Originally Posted by 5-Clicks
http://img187.echo.cx/img187/4328/ve...eresize2fs.jpg
And its picture:
http://img183.echo.cx/img183/4171/p1010001resize6ku.jpg
we must wait a few days, becaus in germany is is very hot :), so it is impossible to do a better ocQuote:
Originally Posted by 5-Clicks
i forgot to write down my stepping, but here is the results from my new venice so far (just hooked it up last night)
I have a very strange problem.
My venice 0520 passes the test of stability of occt...
http://img34.echo.cx/img34/5188/stability1sl.jpg
But if attempt to raise up to 2,550 with 1.4v does not finish pi.
To that it must this?
thanks
i buy LBBLE 0520 APMW
what's an Air Box?Quote:
Originally Posted by boblemagnifique
I have the same stepping as yours... mind sharing your dram settings / voltages? what ram are you using? on air? My OC is in the Venice OC DatabaseQuote:
Originally Posted by tbonekot