UTT type for 441-2 or 3
What's the difference?
Printable View
UTT type for 441-2 or 3
What's the difference?
good stuff opb:) will test. god only knows i havent been able to pull anything stable up until this point, hehe.
Thank OPB :toast:
I appreciate being able to test these, but a little better description of these various beta bioses would be very helpful. We should be entitled to know what it is we are testing here.
which one must i use for bh-5?
I also have same question :)
been using 414-3 since last night, didn't lose or gain anything but it appears to be just as stable as 313-3, so far so good.
Good to know Ben, Ill give 414-1 a try. :up:
Ok so much for that i just flashed to 414-1 with winflash like always, I got the message flash was Successful do you want to reboot now stupid? And Nada.
OH WELL lifes a b!tch. Ill be down for a few days. :(
ouch.
You can hotflash it if you cant get into windows with another motherboard like your NEO2.
This is the exact reason why I made the bootable cdrom. Too many users going down like this. So sorry for your loss:(Quote:
Originally Posted by vlad
For all others, I wil be updating the cdrom tonight and will repost a refreshed image.
good idea. please post when available. thanks.Quote:
Originally Posted by pershoot
Quote:
Originally Posted by Mastakilla
DFI not even know that yet. That what I and Oskar did, and I publish for you guys, so that broken English is from me! :p:
Oke just flasht the 414-2 for my BH5 its a compleet hell i cant overclock any more.
Going for 414-3 now will edit later.
Quote:
Originally Posted by NiCKE^
Not a big deal its not like its never happened before. "CoughCoughInfinityCoughultraCough" Im sorry now where was i? OH yea I'v been meaning to order a spaire anyway. I cant use the Neo2 because if i screw that one up with all my wifes lesson plans and crap Ill be Impaled at sunrise. :slapass:
Quote:
Originally Posted by vlad
holy smoke!! sorry to hear that man....have you try to pull the power cord then reset the cmos jumper and wait for awhile to see what happened? that really bites!! :eek:
Oke i am on 414-3 right now and my overclock is back to normal :toast:Quote:
Originally Posted by Ferry82
Yep. Like is said bro its not like its never happened before, No biggie. Since my stroke i dont sweat the little things. ;)Quote:
Originally Posted by ben805
Quote:
Originally Posted by Wingz
I doubt it..
here is why, if I did not heat it wrong:
Oskar said:
1,3,5,7 are "better" for single side configuration ram. 2,4,6,8 are good for double side conifg. ram.
***********************
personally, when I use 8 on TCCD is big big better than use 7. ;)
**weird, 414-2 for me is the best fit for all ram. :confused:
maybe depends on cpu's ondie memory controller ?Quote:
Originally Posted by Onepagebook
haven't tried these new bioses yet as my beautiful 580W Topower 686P6 died on me just a few hours ago http://www.xtremesystems.org/forums/...656#post814656 :(
tnx..leeched em all but going to use the 414-1 for my vitesta :D
been using 414-2 since yesterday... gain +6mhz oc @ 166 divider (than 310p), it`s stable so far...
1 and 3 fail on my 300Mhz here as I could previously do it w 2.7v
now it seems had to get it pass 3.1v for it ... strange here..
its either memtest #5 or #8 problems on 300Mhz, drive strength 5 would give #5 a go but fail #8....drive strength 7 would pass #8 but fail #5.... :wierd:
So drive strength 5 and need pump vdimm up to see the errors got lesser and eventually reach 3.1v + 0.03 w 1 error...still working on this yet..
270Mhz was fine as before :D:
maybe would try 2 tonite to see how it goes...
Quote:
Originally Posted by |SiLA|
what chips have u got on your Vitesta ( ADATA PC 4000 in assuming)