holy crap when can we get that?! :slobber:
Printable View
holy crap when can we get that?! :slobber:
Hipro , is there a A64tweaker screen ?
That i can see the timings , maybe i can sqeeze more out my ram to ;)
FX53 on phase change..........BAD CPU.......old and not overclockable at all..........It maxes out at aprox. 2930MHz......
http://www.thelab.gr/images/Hipro5/A...88_1_2_png.png
Tommorow I'll put in a 3500+ to see if it does any better.....
Quote:
Originally Posted by Cranox
I'll post it to you tommorow coz right now I'm at home.......
Thanks for the pic Hipro, looks so cool, somewhat stylish too with the black. Keep it up... :toast:
Here's the Tweaker BTW...........
http://www.thelab.gr/images/Hipro5/A...weaker_png.png
......and here's a 3500+ CPU.........Bandwidth is a lot better because of the frequency and the lower latencies in the internal cache of those two different CPUs............Now, once more maxed out the CPU........Shi(f)t, I can't max out my Rams......I have to find a better CPU...... :)
http://www.thelab.gr/images/Hipro5/A...85_1_1_png.png
Just send me a maximizer and I will speak to the overclocking Gods for you. :)
Would be interesting to see if it clocks the same using the 4volt jumper :banana:
I've a question...bandwith wouldn't be better?? :confused: I think i hit 8k with 270-275 2-2-2 and 2,7-2,75ghz... :stick: excusme if i'm wrong but i have to ask... :toast:
EDIT: sorry, didn't see later post's :slap:
good old kingston huh ?
Mine have heatspreaders still intact 2x 256MB KHX3200K2/512 :)
http://www.fileshosts.com/DFI/NF4_SL...em-buff_tn.jpg
http://www.fileshosts.com/DFI/NF4_SL...4_24174_tn.jpg
I don't think so coz I've got about 7839 with Rams at 260MHz and x11multi.......So yes it could be about 8000+ at 270MHz.....Quote:
Originally Posted by ^don.k's^
Great numbers! :toast:
Can u test the max. frequenzy with Hexus Pifast?
It's about 3055MHz MAX......Quote:
Originally Posted by GravediggA
U mean 3055 : 11 = ~ 277MHz?
Want to know the max frequency of the BH6 ;)
3D bencable at 1:1 with the FX53 CPU and a GeForce 5300 PCIe VGA are at 286-287MHz .......about the same with Super-Pi, Pi-Fast 4.1 and 4.3......BTW , this was tested with the x8 multi and default heatsink before the phase change ;)
Yeah, thats really nice! Something is holding me back > 280MHz, but anyway good results for me. :)
http://weber-steuerungstechnik.de/felix/bh6280.jpg
Guys one thing to say.......BEWARE when you put Vdimm via the DFI board coz it's NOT as it seems to be.......For example if you put 3.6Vdimm within bios and you see that Vdimm on screen, ACCUALY it is 3.72Vdimm measured with a digital multimeter....Raising the voltages BEWARE to count in this 0.1 - 0.12Vdimm more that it provides......Those mesurements where tooken some days ago on a DFI of a friend of mine......
Good to know that u know Vdimm messuring point, please share with me, i asked for it often, but noone answerd!:)
Into this red cicle there is an Electrolytic capacitor as you can see........BUT there isn't one on your mobo.......I have soldered it....It's a missing capacitor......Now on one of the pad(spots) that this capacitor should be, you can measure the Vdimm ;)
http://www.thelab.gr/images/Hipro5/T...LI_D_2_jpg.jpg
Thx m8! :toast:
Any better results from the cap u added?
Edit: U are right! 3,37V in win = 3,48V on pin ... thats really suck ... :-\
;)Quote:
Originally Posted by GravediggA
About the cap I added, I didn't notice anything strange or better........
No more updates of this platform.........Either AMD doesn't like me or I don't like AMD!......My nerves are very delicate for playing around with it........I had to plug the mains to Prommie coz the CPU got too frozen, unplug it , plug it , unplug it......Restarts, freezings into Windows, files missing during boot up windows, with less temp it was ok(when I unplugged the Prommie) and when I wanted to run a bench I had to plug the Prommie again.....When one moment I went to toilet, I came back and the windows were frozen.......My nerves.......BUT that was quite pleased to see what my good old Rams could do in an AMD platform or how high they could go.......
Quote:
Originally Posted by eva2000
eva2000 do you know what I just remembered?........Chainbolt from Australia overclockers and the "fight" I and him had, about the BH-5 @ 250MHz ........ :D :toast:
I can't wait to pick up one of your units. I'd much rather use that than the 4.0VDIMM option on the DFI board. :)
sounds like you have a winchester...Quote:
Originally Posted by hipro5
sounds like a CPU that doesnt like the cold... :(
Quote:
Originally Posted by conrad.maranan
Thanks.... :)