I thought the 6800U put out more than 80 watts. I'd like to see the temps on the cards - and I might have to cancel my Maze4 plans. Oh yeah, and I almost forgot: benchmarks too. Silly me.
Printable View
I thought the 6800U put out more than 80 watts. I'd like to see the temps on the cards - and I might have to cancel my Maze4 plans. Oh yeah, and I almost forgot: benchmarks too. Silly me.
I don't think the TEC's can handle the load, but we'll see.
not to rain on your parade or anything Opp, but a stock 6800 ultra puts out 110w, i think you need 172w's at least
try to use some sort of ram sink on the mem.
I had lost about 40 mhz from the ram when I removed the ram sinks from my 6800 in the past, then when I took the mem think off, and filed it down, to get a much tighter fit on the ram, I gained another 20-30 mhz or so by having it tight on the ram.
OPP are you going to be testing the 3500 out tonight?
cant take a joke Dave :p:Quote:
Originally Posted by µnrealneo²
expecting OPP not shooting for the top when hes ready to 3D Bench is crazy D:
I was under the impression that it had been proven with a MM that voltage is a constant ~1.4v, no separate 2d/3d or throttle volt....?Quote:
Originally Posted by µnrealneo²
But the MSI Plat. and Diamond are the same as the DFI.. I have a Diamond and use its SLI bridge on DFI at the moment as I am modding a DFI Ultra into a SLI.Quote:
Originally Posted by charlie
OP are 80Watt pelts gona be enough?
Quote:
Originally Posted by FROG
Well, I think we'll find out soon ;)
I think it'll be FINE :stick:
110w consumption guys, not 110w heat output, and not all from only the core.
Well, IC circuits are something like 99.9% consumption -> heat output?
Cool Opp :toast:
Don't forget the bags of ice and you'll be set:D
Good luck OPP.
Can't wait for teh own4g3 :rocker:
The coolers are colder then straight water so thats why I'm useing them, they will be fine untill my Cascade is ready.Quote:
Originally Posted by FROG
I'm waiting for JB weld to dry on my ehiem for my second loop. I thought I had more water stuff in my garage but my Pumps and Rads suck:D
Won't be able to play until tomorrow, I have one card now. It reads 10c.
OPP
I have the 3500 running now, it can't handle -90s, it freezes up in windows.Quote:
Originally Posted by chunkylover77
OPP
That sucks.
Was looking foward to seeing a -120c winnie
sweet, go Opp!! that board and setup looks ready to rumble man. good luck. Shamino/Lardarse, has got a head start, lets see how well you do. who's got the world '03, '05 record btw??
Sampsa and Kamu hold the WR for 05, they had FX-55 3184 w/ 2 Liquid Nitrogen cooled XFX 6800GTs and scored 12483.Quote:
Originally Posted by Kanavit
I was talking about the Venice. ;)Quote:
Originally Posted by althes
http://www.xbitlabs.com/articles/vid...-power_10.html
a 6800ultra does no where near 110watts according to that.
I got my first SLI bench uploaded :D
FX55+Gainward 6800U GS SLI, no overclocking => 10153
fugger was telling me the other day about a trick that works for him.Quote:
Originally Posted by OPPAINTER
I think it went something like this.
get the cascade alittle cold, like -20, boot up, and max out the voltage, let it get into windows and clockgen your way up.
the extra voltage, and overclocking from windows up while your not at your max coldness, may do the trick to keep you just warm enough to run the CPU without windows going nuts.
Oh-oh.. macci & OPP @ SLI. Watch out ;)
That's a shame about the 3500venice :( I guess you'll have to rely on the trusty fx55 :D