But like 71.84 doesn´t work?Quote:
Originally Posted by johnnyliu3377
DFI Ultra-D modded to SLI works with all the drivers, does that one too?
If it does, the sli bridge is like $10, excellente bang for the buck, and gives u chance to use sli when you want to.
DFI Ultra-D modded to SLi success in working 71.84, because its SLi is runs the 8x+8x way,Quote:
Originally Posted by Eversor
for example like this:
http://my.so-net.net.tw/johnnyliu/Ultra-D/P1000152.JPG
http://my.so-net.net.tw/johnnyliu/Ul...UD_3D10215.JPG
But I test the 3Dmark potency actually is inferior to NEO4-F, why doesn't know? ! :confused:
You´re not running sli in that bench right?Quote:
Originally Posted by johnnyliu3377
IF not, it´s because you´re only using 8x, and he´s using 16x.
off topic:
DAMN! I want your winchester!
2700 @stock vcore? sweet...
What week stepping?
Dear Eversor:Quote:
Originally Posted by Eversor
oh! come on ,It's 3200+ winchester 0444 mpmw! :p:
I have spend many time and the energy only then find... :banana:
As for DFI SLi... A time, I have tried again..... ;)
Tnx a lot
Johnny,
What did you use to close the bridge for SATA2? I used a mechanical pencil and it didn't work. Did CPU-Z show a different chipset ID after the mod?
hello hurtz777!Quote:
Originally Posted by hurtz777
chipset ID is A3,close the bridge in chip ....I use solder connect it! :p:
Ok so just to be sure; this mod works on DFI NF4 Ultra-D as long as I can get the SLI bridge? Has anyone been succesfull by using a pencil instead of solder?
Congrats on your Venice, but I can't believe you actualy think a pencil graphite will connect the points. Just get it soldered. I'd do it for a couple bucks, and it looks very easy on these chips. NIce big solder pads.
Does the new revision nF4 chip not work for modding? I would think that it would only work on A2, or A3 (early) revisions, but DFI builds the Ultra-D to be modded (as you can see by the two PCIe 16x slots, but maybe they stocked up on older chips???? I donno.
ya but if you solder it and the board dies for no reason he cant send it back doing the pencile trick he can just erase it ;)
There is no reason why you can't un-bridge them after it's been soldered. also no reason it would die because of this mod alone. If it works, it won't be ruining anything except your warranty. By the way, I am not interested in providing any mod services to anyone here, just using it as an exanple.
Holy :banana::banana::banana::banana:, I'm going to get myself a MSI K8N Neo4-F, those hdd's are CHEAP! And SLI is just an added bonus.
That's about 120 euro's just for modding 3 resistors :D
this is great news, i'm gonna put together a rig based on this mobo, johnnyliu do you think conductive paint would work?
Does it work on another board???
Hi johnnyliu3377,
Great post, photos and mod :toast: My question to you or anyone else reading this post is; what kind of Vdimm settings are available in that K8N Neo4-F BIOS; are there any above 3.0v and if not is there a BIOS editor which would enable me to mod the BIOS so that I could get Vdimm 3.0 and above?
Concerning the SLi limitations imposed by Nvidia's latest drivers; can't they be modified with an editor? Thanks in advance!
Hmm interesting results.. Looking to go 939 soon and Msi looks promising..
Hello John...your thread here inspired me to go purchase the Neo4-F and I hope to have a new Venice for it very soon. I do want to ask you a couple of questions about the chipset though...Quote:
Originally Posted by johnnyliu3377
1) My chip ID is the same as yours, 0501A3. Do you know what the other serial number to the left of the ID on the chip means? I cannot quite make out the one on mine but it appears to be Q_2624.1. Do you have any info on how I can find out what this number means?
2) And another one...have you been able to completely activate Active Armor on the chipset? Not just the firewall but the complete tool. I figure it is integrated onto the chipset, do you know a way to have it activated?
3) Finally, what's your opinion of Core Cell, useful utility or bloatware?
I have more, but this will do for now. God Bless ya Johnny, and thanks for any helphttp://www.xtremesystems.org/forums/misc.php?do=getsmilies&wysiwyg=0&forumid=58#
Smilie
i notice that each one of the points to solder has two wires it seems, do they just solder those together aswell??
what about tha bug going over 219Mhz HTT, Can someone confirm that?
Umm, I might be blind, stupid or both, but how the heck?
How can that card even fit psysically in the slot?
I guess he cut off the slot...
So 6 months later...
How's the Neo4-F as a BUDGET A64 rig?? What's the verdict?
C
will only affect your Winnie if CBBID week 0450 or laterQuote:
Originally Posted by Barr3l Rid3r
mine is (was) CBBID 0451 and had 219 FSB bug
I've only seen that as a problem with CBBID CPUQuote:
Originally Posted by Barr3l Rid3r
well I bought one for $60 for my 24/7 home internet/gaming rig with an Opteron 144 and an x800xl... should work well.
C