Abit AA8XE @ 429FSB

Has anyone run tests to make sure that the PCI is locked at those speeds? It could be entirely possible that the reason it wont function past POST is because the PCI lock has become unglued

FUGGER, ocguru can't do more than 400, unless someone can mod it for >400.
I know I get close to zero performance increase with 3,3,3,4 compared to 4,3,3,9 but I dunno if 3, 2, 2, 4 will help.

It will shave the time down for sure.

Tried 4-2-2-8 2.1 ~ 2.2v? Ive been beyond 320Mhz 3-2-2-x on almost all my micron.

You have a boot CD with memtest?

Quote:

---

Originally Posted by LardArse

kunaak, gotta install sandra first, don't have it on this partition.

---

download it ;)

lets see the bandwidth finally.
I am too curious.

Try this if you are planning on getting back to 6Ghz soon

Set memory to SPD or loosest possible.

Boot to memtest and watch for errors in test 1, those errors will not be present at 5.9Ghz. I am yet to test PLL tuning beyond this but it should work best upon previous processors I have pushed over 6Ghz.

I am just wordless :eek: :eek: :toast: :banana4:

Damn, thats intense. I wish i could get my mobo here so i could join in on the winnie action... im totally missing out... damn shoddy NEO2!!

OCZ should send shamino some of those nice DDR2 EB Rev2 for some review and pushing around too =)!!!

very nice findings you got there...keep pushing =)...

Excellent GT1 score as well.

Regards

Andy

Freakin awesome and congratulations. Good ole ABit :D

22sec is fast ...is DAMN fast...GJ LardArse ! :toast:

I'll just move aside and watch with my 27sec ;)

xtreme LardArse :toast:

the ee are awesome it seems that intel cpu are still can go high :D

xtreme! :toast:

Thx so much guys! FUGGER, I don't understand what you mean, this will help me bench at 6G? FYI, I've never tried memtest in my entire life before :P
That be nice, OCZ memory is quite welcome on this board for sure :D

Quote:

---

Originally Posted by kristos

way to go shamino :toast:




:off: I heard Abit was slacking a bit a while ago and that this was in part due to (financial) problems :confused:

anyways... is Abit back on top or not? :) Or were those just empty rumours?

---

if you have any problem with ABIT bios just send email direct to ABIT Taiwan

The Stilt & me did that and we got new bios as requested :)

Congrats Shamino :worship:

What voltage?

Quote:

---

Originally Posted by georgesod

What voltage?

---

I am sure enough :D

nice work LardArse :)

Landarse, for the 1Mb run, u used some optimizations?

maxmem=104
ramdisk
Large system cache and lock pages in memory enabled
Boot in diagnostic mode
Superpi process with a realtime priority
Ur first superpi run is the best?

I noticed your next times will be the new WR

i just wet myself :bananal:

congrats!!! :toast:

6Gig in windows finally :)

http://www.vr-zone.com.sg/Shamino/aa8xe/6giger.JPG

Boots at 436FSB/ 6.1gig but no load at windows.

http://www.vr-zone.com.sg/Shamino/aa8xe/6100.JPG

Thx kunaak for the nag on sisoft, I like the mem bench at 6010Mhz:

http://www.vr-zone.com.sg/Shamino/aa8xe/mad1.JPG

Bad night for 3D 03 though, had a 19.6K run that crashed at the last few seconds of Nature :(

Compare link of previous night's 03:
http://service.futuremark.com/compare?2k3=3800232

Hopefully I'll get a good 03 run the next session

cpulloverclock, its not tweaked, I dunno how to tweak for superpi or if it even helps, not a regular pi-guy :D

Nice :)

nice LardArse :) wonder how the sisoft score would be with 3-2-2-x

Wow... :eek: Very nice indeed. :up: