My DFI SLI-DR Impressive.....

Printable View

Show 100 post(s) from this thread on one page

02-04-2005, 12:34 AM
kiwi

Very nice.
But strange that I cant get over ~320HTT on my NF3 despite setting low cpu multiplier (5x) and low ldt (2x). Increased chipset voltage as well but keeps crashing if I raise htt with clockgen.
02-04-2005, 12:39 AM
gigi77

thanks kiwi

luigi
02-04-2005, 01:26 AM
bito

I'm trying to find out if the NF4 SATA ports hinder overclocking in any way.
02-04-2005, 01:49 AM
Thomas FJ

Quote:

Originally Posted by DazzXP

lol 460 HTT insaine i can't wait for my SLi-D to arrive have you added chipset voltage? No need for a DDR booster as that only goes to 3.9v while this can do 4v mem and 2.1 vcore :)

You might wanna use it anyway... :)
http://images.tweaktown.com/imagebank/oczddrb_test1.gif
/Thomas
02-04-2005, 02:24 AM
gundamit

Incredible 3dMark2001 considering the CPU speed. A quick check on the ORB reveals that most with 6600GTs around that score have much higher CPU speeds (200mhz+) and have clocked up their cards well over the stock 500/1000 speeds as well.

Is it possible that the the mobo makes that much difference? :confused:
02-04-2005, 02:37 AM
Saliman

nice board mate! :)
02-04-2005, 02:49 AM
gigi77

little UP

http://img216.exs.cx/img216/881/4603d1qj.gif

Luigi
02-04-2005, 03:41 AM
dippyskoodlez

:slobber:

Thats all I can say.....

:slobber:
02-04-2005, 03:52 AM
gigi77

Go UP from Italy STOCK DISSI on DFI SLI-DR

http://img215.exs.cx/img215/5461/4702ep.gif

Luigi
02-04-2005, 03:56 AM
cpulloverclock

and 500 is possible

a high HTT is just for the fun
02-04-2005, 04:06 AM
gigi77

10x cpulloverclock

Best regards,

Luigi
02-04-2005, 04:11 AM
gundamit

Quote:

Originally Posted by cpulloverclock

a high HTT is just for the fun

I've never seen high HTT = performance, but he's snapping off a high 3Dmark2001 (high based on his CPU speed, and video card OC) so I'm wondering if that is a contributiong factor. Maybe we can get a 3Dmark2003 score to isolate the video card and see whats its bringing to the table.

Regadrdless of how he got there, its pretty impressive. Makes me think I'll go for a single 6600GT for my DFI SLI mobo until prices on 6800GTs come back down to earth. :D
02-04-2005, 06:51 AM
gigi77

http://img192.exs.cx/img192/2231/4754tf.gif
02-04-2005, 07:05 AM
gigi77

The Last Up for FSB 477Mhz 2.5x 1.5v ldt 1.7v Chipset

http://img192.exs.cx/img192/8461/4770mq.gif

10 to tecnocomputer
02-04-2005, 07:12 AM
maverick89

nice score gigi! ;) ;)
02-04-2005, 08:21 AM
boostdfd3s

what kind of cooling are you all using on these rigs?
02-04-2005, 09:05 AM
J-Mag

You can use half multi's for ldt? and what is the standard voltage?
02-04-2005, 12:12 PM
gigi77

GEIL ULTRA-X PC3200 & DFI SLI-DR

http://img153.exs.cx/img153/7572/geil3156gh.gif
02-04-2005, 12:15 PM
gigi77

http://www.anandtech.com/mb/showdoc.aspx?i=2337&p=4

http://img153.exs.cx/img153/4594/geil3186jf.gif
02-04-2005, 01:41 PM
Rippthrough

:gobsmackedsmily:

I really do think AMD should go DDR2 very quickly, we've already shown that relaxed timings don't make too much difference to the A64's.
02-04-2005, 02:07 PM
gigi77

The Max Not Stable on 3d

http://img97.exs.cx/img97/1838/geil3258mx.gif

Luigi and Dfi & Geil
02-04-2005, 03:41 PM
overcrash86

Quote:

Originally Posted by gigi77

The Last Up for FSB 477Mhz 2.5x 1.5v ldt 1.7v Chipset

http://img192.exs.cx/img192/8461/4770mq.gif

10 to tecnocomputer

very nice job gigi :slobber: :toast:

i wait mine ,but isn't available in france :( for the moment ,i've en 3000+ winnie 0446 SPCW without mobo :rolleyes:
02-04-2005, 05:41 PM
The Byter

325 1:1 :slobber:

gj !
02-04-2005, 05:52 PM
reject

that a FX-53 or 4000+?
02-04-2005, 10:47 PM
Unoid

Quote:

Originally Posted by HARDCORECLOCKER

:D O.K. now I feel sick......., this is an official call to all RAM manufacturers to release at least DDR-800.

What's the worth of a 500hp car with speedlimited tires at 50mph ???

:toast:

going 0-50mph faster than everyone else of course

Show 100 post(s) from this thread on one page