Printable View
Nice numbers, H2OGun, your scores have been added. Are you the one who made those cool (literally) SLI water blocks with the opposing barbs? I recall, without looking through the forums, that it was you. If so, those blocks look very nicely made.
And, I see you have the DFI. I think that will be THE PCI-E based board for O/C efforts for some time to come.
Thanks. I own the blocks, yes, but am not the original maker of the blocks.Quote:
Originally Posted by dwwalker14335
How is the MSI board getting along with you? I've tried it before. With more voltages, it will be as good as DFI. :toast:
I saw pictures of the blocks, and they look a lot like the DangerDen NV68's. Those opposing barbs will come in handy on tight SLI setups like the DFI and MSI. Most blocks are too thick and the barbs are in the way.
The MSI is working quite well, in spite of the artificial 90 nm 1.450 VID limit on the CPU. It seems to run a max of 1.55V into the CPU. But, in spite of that, it is more stable at 2.7 GHz than the Neo 2 with more voltage. I have been able to run the 2 x 512 MB PQI Turbo DDR at just over 300 FSB, 1T and a 9X multi. So, so far, it is looking very good.
As for the voltage limitations, it seems all the manufacturers are limiting the VCore on 90 nm CPU's. I think this has to do more with pressure from AMD than anything else. Putting all that voltage into the Winnie cores can lead to more RMA's. And, AMD does have pull with the motherboard manufacturers.
Okay here's my scores with A8N-SLI Deluxe bought off oc-rookie who did the vdimm cap mod + vdd chipset mods (set at 1.675v). CPU cooled by MCW6002 with MCP650 + MCP600 in series + Thermochill 120.3
3500+ 90nm @11x247 = 2722mhz
A8N-SLI Deluxe 1004.01 bios
2x XFX 6800GT PCI-E stock heatsink @400/1175
2x512MB OCZ PC3700EB Singles @247mhz 3-2-2-8 1T
580W Topower 6P686 35A/12V
3dmark2003 @400/1175 = 22,244
3500+ 90nm @11x233 = 2564mhz
A8N-SLI Deluxe 1003.05 bios
2x XFX 6800GT PCI-E stock heatsink @405/1150
2x512MB OCZ PC3700EB Singles @233mhz 3-2-2-8 1T
580W Topower 6P686 35A/12V
3dmark2003 @405/1150 = 22,135
3dmark05 @405/1125 = 10,219
Full pics
- http://www.fileshosts.com/AMD/Asus/A8NE_Deluxe/web/
- http://www.fileshosts.com/AMD/Asus/A8NE_Deluxe/web2/
eva2000, results posted.
I was wondering when you would show up! Nice to see you here.
I still have to see about a volt mod for the MSI Diamond board. It looked like an easy mod on the ASUS, but I have yet to see what is required on the MSI.
thanks.. it's just too hot and humid here so night/morning benchies in cool 28C room temps is only time LOL
may i suggest you also do a table for 6600gt's? i'm sure theres a few 6600gt sli owners feeling left out :)
What? You mean not everyone has 6800 GT or Ultra SLI systems? Ignorant me. Sure, I can do that. I will create a subclass. That way everyone can play ;)Quote:
Originally Posted by Jamo
Hmm, a nice cool 28C. I guess there is a plus to winters after all :)Quote:
Originally Posted by eva2000
Here, it is 28F.
Very nice score, walker.
You have beaten four FX55's and one of them is even phasechanged! :eek:
I am not sure what the others FSB rate is. Mine is at 300, and that seemed to really help 05 versus CPU clock. And, 05 is all about the GPU clocks and memory transfer rates. 03 is more balanced, but it is still a GPU dependent score, and 2.7 GHz on the CPU helps a little. In AM3, however, I can only get around 93K, since that bench is the most CPU dependent of the benches. So, I am still looking to get an FX-55 to replace my Winnie 3200.
My first SLI Gainward GS GLH 6600GT test :D ( with stock coolers )
A64 3200+ @ 2.56Ghz with Hyper6
Vid @ 500/1148
3DMark03 = 14967
http://service.futuremark.com/compare?2k3=3653293
A64 3200+ @ 2.56Ghz
Vid @ 540/1154
3DMark05 = 6234
http://service.futuremark.com/compare?3dm05=539481
Quote:
Originally Posted by Swing
Yep, this Asus has me ham strung pretty bad. Since you cannot run anything above 240 HTT on this board at 1T, I've just kept my HTT and memory low with the tightest timings I can run (CAS 2 2-5-2 1T).Quote:
Originally Posted by dwwalker14335
That said, I'm not done yet with this combo. I haven't used A64 Tweaker nor got around to pressing my card clocks any higher. I have some improved cooling and GPU vcore coming along soon:)
I had the ASUS board as well. Could not get it stable at 250 FSB, 1:1 with the RAM at 1T (250x10). With the MSI, 300 x 9 is stable. So, this board is the ace in hole for now. I have to work on the core volt mod for the Ultra cards. Still at 1.4V. I will up it to around 1.7V, and it should get well over the 500/1300 mark. With a single AGP card, I was able to get around 6650 at 515/1320. I will mod these cards similarily and hope for the best. A stock XT PE core clock would be nice :D
xs64, your scores have been added!
Another update:
05 : 11,643 http://service.futuremark.com/compare?3dm05=540391
03: 25,288 http://service.futuremark.com/compare?2k3=3654117
This is about all I'm gonna get with stock voltage and basic water cooling on the GPU. I'll look for more speed there still. I also still need to tweak the ram and OS.
Onward....
Great scores Mike :toast:
OPP
Wow fantastic!! Keep up the great work!Quote:
Originally Posted by mdzcpa
New scores posted. Very nice results. Looks like I have to do a few runs tonight. ;)Quote:
Originally Posted by mdzcpa
Entry for the 6600GT 3dmark03 class
6911 Happyhero, leadtek 6600 GT Extreme @ 561 MHz / 1181 MHz, AMD Athlon(tm) 64 2409 MHz
Entering the results now.
New update, myself. I was pushed by mdzcpa :stick:
He made me do it ! :D
3DMark03 - 25,507
Used a 302 FSB, 496/1260
http://service.futuremark.com/compare?2k3=3654674
3DMark05 - 11,671
Used a 302 FSB, 501/1260
http://service.futuremark.com/compare?3dm05=540815
Also posted new FM Approved results of 11,162 in 05 and 24,890 in 03.
And, if you are wondering why they clock so well, I bought four cards, picked the best two, and sold the other two.
I am liking this MSI board:
http://img168.exs.cx/img168/3816/300fsb1fr.jpg
http://img168.exs.cx/img168/2305/300fsbcpu1pq.jpg
http://img168.exs.cx/img168/891/300fsblat0bf.jpg
here is my best 3dmark03 score right now
A8N SLI Dlx
3500+ @ 2600 Mhz
2x Evga 6600Gts @ 556/1113 in SLI
Both Cpu and Gpu's air cooled..
http://service.futuremark.com/compare?2k3=3654814
03 test.
20254 happyhero, XFX 6800 GT @ 402 MHz / 1123 MHz, AMD Athlon(tm) 64 2211 MHz
move over expensive rig coming through LOL
3500+ 90nm @11x246 = 2705mhz at 1.6v
A8N-SLI Deluxe 1004.01 bios
2x eVGA 6800U PCI-E stock @455/1185
2x512MB OCZ PC3700EB Singles @246mhz 3-2-2-8 9-13-2222 1T
120GB WD 1200JB
580W Topower 6P686 35A/12V
3dmark05 = 10,803
3dmark2003 = 23,628
strange i set it at 455/1185 but ORB says 453/1188 :confused:
Good stuff there!Quote:
Originally Posted by dwwalker14335
Okay, looks like I'm gonna be making a few more passes tonight as well :D
Quote:
Originally Posted by mdzcpa
Thanks. Maybe I will last a whole 24 hours on top of the list ;)
I am tapped out. Those scores are it. Unless, of course, I resort to hardware mods, but I want to make sure these cards don't flake out. So, I will keep them as is for a bit to ensure they are broken in and not broken.
Keep the better scores coming, guys!