GravediggA
How the hell is the memory doing so high - 1.6 ns?
Printable View
GravediggA
How the hell is the memory doing so high - 1.6 ns?
422/1120 with my single slot gt BFG OC. SIngle slot cooler kinda sucks from what i undewrstand (thats what i have)
Yeah BFG stock cooler is a POS. Loud and sucky. Did you flash your card to 1.4V or is that @ 1.3V?
440/1200 24/7 with leadtek 6800gt. Stock volts but have added nv silencer to it..
gaddster
1.6ns memory on the Leadtek, correct?
I think it is actually 2.0ns..in fact i'm 100% sure...
gaddster
Did you mod / flash another bios? The BFG I have tops out @ 1.1 on memory barely. What a POS! 2.0 ns, of course.
Quote:
Originally Posted by IvanAndreevich
well after flashing it with every bios under the sun, I came to the conclusion that the original bios it came with gets me the best clocks & best scores.
No vmods done..
Im still at 1.3, would go 1.4 but would want to upgrade the cooler firstQuote:
Originally Posted by IvanAndreevich
My Leadtek that i had would do 400/1100 and thats allQuote:
Originally Posted by gaddster
With a modded NV5 (cut the heatsink to install independant ramsinks on each chip) and 1.4v on my Inno3D 6800GT I hit 455/1325.....and yes, it was 2.0ns ram. :banana4:
We need pics of that!!!!! :D :D :banana: :banana:Quote:
Originally Posted by Cornelious0_0
To bad i sold the thing and picked up the XT. Not a bad tradeoff though, ended up with a 700MHz Platinum in "exchange"...with more to come.Quote:
Originally Posted by Garrett
Sorry I dont have any pics....never got a hold of a camera when I had it. :(
I thnk power issues are holding my 6800 GT back (unstable overclocks despite adding water). I'm going to try a second PSU. I read somewhere that one shouldn't run the GPU on a different PSU than the CPU. Is this true and why? :confused:
Couldnt you just put (the) extra cash towards picking up a nicer PSU for your system itself? If you're running that Aspire in your sig you could move up to a 520W OCZ or even a PCP&C and be well enough off to not have to worry about running dual PSU's.Quote:
Originally Posted by uclajd
No one here using Leadtek?
Couse thats the only witch is in the resonable pricetag here in sweden..
i used a leadtek, couldnt even get to ultra speeds so i sold it
Well that sucks..
Gona look for at nice Inno3D 6800GT.
Cheerio!
Edit: Does Inno3D have a PCI-E devision? Cant find any..
Cornelious0_0
Did you voltmod your RAM?
haven't seen any....but my card was kind of a freak, so i dont know how "set" on Inno3D you should be. ;) I just think it's kinda funny cus they're kind of a "generic" or lower end brand, so it was cool to get that kind of an overclock out of the GT I had.Quote:
Edit: Does Inno3D have a PCI-E devision? Cant find any..
Sure didn't.....as I said, my card was a freak. :DQuote:
Did you voltmod your RAM?
No spare cash for a GT but got a Leadtek 6800LE here with modded NV5 silencer plus 92mm fan @16x1:6 425MHz/946MHz @1.5v/2.88v with additional 3x 4700uF 16v caps soldered on for good measure... :D
Nice, I would have liked to have been able to add caps to whatnot to the GT, 'cus they simply cannot handle 1.5v without any electrical modifications....and it would have been cool to see where my gem of a GT went. ;)Quote:
Originally Posted by stealthbomber
wow thats deadly! Good work!Quote:
Originally Posted by stealthbomber
to those gainward fans the company's management has been taken by another TW IT company. seems only European management will remain the same, dunno if there will be any more VC branded "gainward".
@ marilynmx
that explains when i called gainward yesterday asking about 6800gt pci-e they told me they didn't plan on making one.