It is ok for me :) Got my memory stable at 270x10 wich wasn't possible before (1.41b). I'll try more benchmarks later.
Printable View
It is ok for me :) Got my memory stable at 270x10 wich wasn't possible before (1.41b). I'll try more benchmarks later.
hey cool you have the same problem then I!
I have also Geil Ultrax and can't get anything stable and now I'm also at 270 with CL2,5-3-3-8 and 289 Cl2,5-4-4-8
but DC makes many problems :(
It is doing superpi 8Mb at 280 2'5-4-4 1T DC! It has never done that!
to everyone with problems with the files, dont use windows xp built in zip support, it wasn't working for me either, just install winrar www.rarlabs.com and it works fine.
this isn't a plug lol, it's just what got the zip to open on my end.
ok im having problems getting over 260x9 with htt at 2 so how are other peole getting higher oc?? shall i try and chnage my ram timmings?? if so what to?
Quote:
Originally Posted by spud
what ram are you using? and what is your cpu voltage?
I have the same problem, the only way to get pass 260 sync for me is to lower the multipple... I haven't tested with this bios, but I will do that tomorrow...Quote:
Originally Posted by spud
Quote:
Originally Posted by Wingz
im using tccd ocz ddr533 ram and cpu volts are 1.55
1.55v might be too low to hit 260 up it to 1.6v or 1.65 and see if that helps.Quote:
Originally Posted by spud
hi mate i cant go any higher as i got it at 1.5v plus the 5% if i go up any more does not boot at all
What are your temps?
no idea dude as im on a vapochill. here i smy complete spesc. should have posted them first
msi k8n neo 2 plat
3200 winnie
1 gig of ddr533tccd 2.5-3-38
x800
120gig hd
vapochill ls
Maybe your Winchester don't like it 2 cold, but if you raise the vcore and there is no boot something else must be wrong, you have the same problems with 2T?
Anybody with NON-TCCD memory getting higher o/c's with this?
I no have no floppy is there a way to use the live update to flash this bios???
can I just rename the bin and use live update do the flash
I did this to install 1.36b...I renamed to 1.4 bios and installed ok
has anyone tried..I a mwould like to give this go but I do not to get a bad flash...
thanks
I Use winflash.
i reverted to 1.36B as this hurt my system stability. nice try tho, thanks.
Anybody else try this? Many had promising results, it seems.
Well i will try it again whe i get my newcastle, i just sold my winchester.
I am using it, the lack of 15 and 18% in cpuvid isn't good thou, becasue my vcore setting doesn't work so I can only get 1,63 vcore atm...
1.36b is all you ever will need if it doesn't work right something is wrong from the start.
bios didn't do anything for me
yea I was wondering the same thing. anyone tried it with bh-5?Quote:
Originally Posted by IvanAndreevich
Any current results with this BIOS and sub-zero problems with NC or Winnies?
Sorry to bring up this "old" thread again :p: but i'm looking for this bios and the link appears to be down. I really need this bios, since it seems to give good results for those with TCCD memory! Would anyone be kind enough to give me a link to this bios, or send me a copy? :D
I'm only looking for the MODDED version of the 1.5x bios by MMIQHW, not the original.