Printable View
Quote:
Originally Posted by pc ice
Thats still a cold issue, but at least you can get em to work at -50c, most people cant below -10c!
"and... congrats on the record, lets see some 3dmark"
yea same here. Is it good enough for 40k marks? Can you get your x800xt clocks higher too? 40k would deserve congras from all of us, especially me :slobber: :toast:
dude, will let u know soonQuote:
Originally Posted by pc ice
going to grab a 3500+ NC later n' run it @ -60c
My newcastle primed up to 3.05ghz and benchable to 3.15ghz until it died of my vmod (well I don't even know how much volt I pushed through it as I accidentally set it at 2k instead of 20k to start off)
One of the 3 winnies i am receiving I hope should beat that :)
Fantastic! :toast:
on a64 memory speed doesnt matter much at all when compared to cpu speed
huh?Quote:
Originally Posted by reject
9x256mhz was faster than 11x225 for me.
hey pc ice....you say your chip don't want to go highter with more vcore than 1.65v...mine seem to love vcore....with 1.65v my chip do around 3ghz and that climb when i turn up the vcore....maybe i'll try to vmod my Neo2
neo2 will give default near 1.8v with Winnie, why do Vmod?Quote:
Originally Posted by Boogotop
Nice nice Winchester and Newcastle results.
Here my newcastle:
http://www.xs4all.nl/~famchow/A64_34...een_3.2GHz.JPG
because the max i can get are 1.76v....maybe my chip will go little bit highter with more voltQuote:
Originally Posted by charlie
between this thread push me to try my max screenshot...here we go!!! :D
http://anarchb.free.fr/3500+@3252mhz.20041216195136.jpg
Quote:
Originally Posted by kakaroto
a good NC you got there!!! :toast:
dude my apologiseQuote:
Originally Posted by dfx
supposed to grab a 3500+ NC today but ended up buying a FX53 from my local retailer
got a good discount from him
too hard to resist :D
http://img.photobucket.com/albums/v1...02004/FX53.jpg
Can't compete with you guys, but I'm pretty happy with my 3000+. This is with aircooling (Hyper6). Normal room temps. Can't get any further with water. Wonder how it would do under a Prommy? Oh, by the way. Perfectly stable @ 2.8GHz. This is only a max MHz screenshot.
I find that each MHz ram is worth 3MHz cpu power. Thus when I go tccd and if I gain 66fsb, itll be like 200MHz more cpu clocks, therefore 266x9=2.4GHz would be as good as 13x10(if unlocked which mine isnt) or 290x9 with ram async at about 200. This is also why im matching my newcastle single channel cause im only 200fsb 2.5-3-3-7 vs. my 234fsb 2-2-2-x which my newcastle had bh5. once I go tccd I should me 200-300MHz faster than my old newcastle. is 40k marks possible with todays winchesters? Macci hit 34k with his all on air!
i'm not having much luck with my winchester, bench stable at 2.6ghz but no higher, and without being able to kill the OVP on my A8V i can't get my BH-5 the volts it needs :(
1.8 isn't enough.. :DQuote:
Originally Posted by charlie
Now seriously though, 1.8v is only with 1.36. Vmod gives you more flexibilty with bios selection (or pain of... this mobo saw about 20 bios flashes already)
Quote:
Originally Posted by pc ice
Thank You for the gift. Once I get some better cooling well see what it max's out at on air. So far with stock cooling it will only do 2.75 - 2.8ghz. It runs too damn hot. 55c on stock speeds and cooling.
tommorow i will try for more then 3252mhz!!!
i will try to go outside with the prommy....maybe i will got some cold temp...it suppose to be -10 celcius with sun :D
awesome the .09 stuff is impressive, hopefully mine will be too
Heres a 3280 Mhz screeny....I ran this chip all the way up to 3.4 Ghz, and upon reboot, it died.
I also got a run at 3dmark at 3188....I think this chip would have been benchable at around 3.3 ghz.... damn my luck...
3dmark2001 link-> http://service.futuremark.com/compare?2k1=8311168
New Title:
mikem takes the Worlds Fastest Winchester Challenge!!
sweet clock here mikem!!!
Here's Ice's Newcastle - is this a WR
http://home.comcast.net/~shrmytoon/untitled.bmp
What cooling and whats the rest of the system ? :)Quote:
Originally Posted by Shroomalistic