High voltage lovin voltmaster, pics , specs , release date

Quote:

---

Originally Posted by agenda2005

Bigtoe,
Hey thanks. That was remarkable latency. If you can, please can you test run those modules on A64 939 system and let us see some nice sandra bandwith and EVEREST memory latency. Thanks again for the quick response.

---

I have them in the 875P-T DFI at the mo and i seem to have squeezed 2.5-2-2-5 all tweaks on out of them at 3.2Vdimm 233fsb ;)

939 is an issue at the mo for me...i have the Asus Via board with a workin lock bit the booster doesn't like it and the ATI RS480 i had was sick and went back to ATI, means im stuck with 754 and the benchies i already did showing the latency you have already.

Im sure OCZeric may chime in with the MSI if he gets a mo and run a bench or 2 for you.

not sure on the exact cost , but lower that our PC-3200 platnium rev 2

So, I guess it's safe to assume that it will be less than $279.75. I'm hoping it'll be in the neighborhood of $250.00. :D

Yeah, it's nice and well that it runs good on 754, but with the Winchesters becoming more popular by the day, it would be huge if you could replicate the same performance on 939 as with 754.

make it neighborhood at around 220$ ...PDP XL :D

These are going to be perfect for 754 rigs. For those that are bottlenecked by the 754 mem controller running 2x512 @ speeds over 270. This is the missing link we've been waiting for. Thanks OCZ!

Torin ,

We can get pretty decent scores on the Athlon 64 939

I have a PSU with a 4.4V 3.3V rail all ready, it just depends on the price of these things.

What is the max voltage these support without spontaniously dieing?

Quote:

---

Originally Posted by craig588

I have a PSU with a 4.4V 3.3V rail all ready, it just depends on the price of these things.

What is the max voltage these support without spontaniously dieing?

---

3.3 to 3.4Vdimm is the sweet spot, anything there after just creates heat etc.

And 3.3v and 3.4v are the max voltages in which you would honor an RMA... anything past that its void? And any idea on the heatspreaders? I think since these have their own new product line they should have some gnarly heatspreaders...

I asked and we seem to think that we will limit it to 3.5 or 3.6 under warranty

I run my BH5 bare with 3.6V. HSs don't help much.

Great product!
Well done OCZ :toast: , your company (and DFI) is the best thing that happened to the overclocking community in a looong time!

thanks Rabbi

Off topic, but you guys sent back some amazing EL4200 platinum to replace my bad ones. Tell Sean I said thanks! both do 300 2.5-3-3-7 1t memtest stable.

So i got playing, DFI 875 P-T (wonderfull board BTW) beta Voltmaster that does 260 2-2-2 single channel on my 250UT at 3.3Vdimm sat here at 3.2V 2-2-2-5.

Now i have been memtesting this rig all night and i have NO OS on it yet. 252fsb was all test stable so i would say 250 is fine and dandy. Some dimms may do better than this, some may do a little worse, remember they do a lot better on the A64 but at least i got reasonably high with an Intel rig.

here you go.

do you know roughly how much it will cost in australia? EL plat rev2 is 560$, while the other TCCD ram is around 470$. if its under 480$ for a gig i would seriously consider it

Is this product to be considered limitied edition? Meaning that we better get them while you have them? Or is supply good and constant for atleast the near future?

does this ram do well at all with higher latencies, say 2.5-3-3-7, or 3-4-4-8?

i would think thats defeating the purpose and it wouldnt be as good as tccd

Seriously, I haven't been on these boards for long, but the OCZ involvment here is amazing! :up:

:idea: It may just be time to vdimm mod my 9NDA3+ :D

While this product looks very interesting and the timings are nice i'm just curious as to why everyone doesn't just get some sticks of bh-5 and do 2-2-2-5 up and beyond 250 with volts? I got in the outpost deal and scooped up a few sets and some one else on here got like 40 or more. Is the fact that people are wanting so much for bh-5 now or do you guys think this product will surpass bh-5. Not trying to rain just asking a few questions to satisfy my curiousity.

:toast:

i'll bet they may not boot as cas3. just look at the chips posted in the first post. they have little round dimples exactly like winbond ic's. also performance and voltage figures almost exactly match bh5/6 results. maybe even the latest ch-5?

did somebody find a stash or fire up the old winbond machines?
are there any other chips that display that two dimple marking?
i bet they are winbond based ic's on brain power pcb's(as seen by brain powers B6U808 number also in the module picture)

i was hoping the results of winbond/brain power might be even better. i was in fact planning to try baking some on myself after raping some hyperx but i see it is not worth it. :(

Quote:

---

Originally Posted by flytek

i'll bet they may not boot as cas3. just look at the chips posted in the first post. they have little round dimples exactly like winbond ic's. also performance and voltage figures almost exactly match bh5/6 results. maybe even the latest ch-5?

did somebody find a stash or fire up the old winbond machines?
are there any other chips that display that two dimple marking?
i bet they are winbond based ic's on brain power pcb's(as seen by brain powers B6U808 number also in the module picture)

i was hoping the results of winbond/brain power might be even better. i was in fact planning to try baking some on myself after raping some hyperx but i see it is not worth it. :(

---

Well our 3500 and 3200 platinum limited edition's were bh-5/6 on BP pcb's so you've already seen that. These are not old chips they are brand spankin new stuff and AFAIK this won't be limited edition :toast:

yea this is excellent news. effectively this stuff at least equals winbonds ic's success.
and it will now be in regular supply. that is really great news. maybe they will get even better over time. ddr600 at 6-2-2-2.0 may be achivable eventually under the right circumstances/cooling.

any idea what happens to these modules if they are say inside a boxed ln2 rig with -50' air temps? :D