ASUS K8N-E [vmod] Vdimm/VLDT

Quote:

---

Originally Posted by Supertim0r

here's my vmod pic :o)
http://sogamed.com/images_member/96427_3.jpg

---

Verry nice job, you got there !! :toast:
you din't say if it working like you wanted, :confused: what's your voltage
after the moded ?? :confused:

Hi everybody !
I just got my OCZ DDR Booster about 2 hours ago, I haven't try it yet
because i have no time, but later on to night i will and i will let ya know
if it work on ASUS K8N-E Deluxe 250Gb
here's a couple pictures :banana:

http://img83.exs.cx/img83/5020/ocz-ddrbooster002.jpg
http://img83.exs.cx/img83/2834/ocz-ddrbooster019.jpg
http://img83.exs.cx/img83/7645/ocz-ddrbooster021.jpg

i soldered a 22k resistor (using mouzel guide)
added .25v
ie : 2.5 = 2.75 / 2.6 = 2.85 / 2.7 = 2.95v

sorry my poor english btw

Quote:

---

Originally Posted by Supertim0r

i soldered a 22k resistor (using mouzel guide)
added .25v
ie : 2.5 = 2.75 / 2.6 = 2.85 / 2.7 = 2.95v

sorry my poor english btw

---

your English is fine, probably better than mine ! :(
anyway, how do you know that your Vdimm have been changed ? :confused:
where do you read your Vdimm after the moded, in the Bios or where else ?? :confused: or you read it with the Digital multimeters ??? :confused:

multimeter (first pic from mouzel)

So on this board if you mod the VMEM, the bios memory voltage reading will not be affected? I am getting freaking tired of the poor VMEM on this board and I might just do it this weekend.

Any VDROOP mod for this board? My CPU voltage fluctuates like a POS in an ocean during a storm.

Quote:

---

Originally Posted by IvanAndreevich

So on this board if you mod the VMEM, the bios memory voltage reading will not be affected? I am getting freaking tired of the poor VMEM on this board and I might just do it this weekend.

Any VDROOP mod for this board? My CPU voltage fluctuates like a POS in an ocean during a storm.

---

:idea: Get youself a OCZ DDR Booster :D It work verry good on Asus K8N-E Deluxe, I get my Vdimm to 3.4v with it :banana4:

I could, but it costs money whereas it will take me 5 mins to do a VDIMM - looks extremely easy.

What bothers me morE is the CPU voltage. Why the hell is it jumping from 1.66 to 1.76 when set to 1.75 in the bios?!

Well, is there a VDROOP mod for this mobo or what?

Quote:

---

Originally Posted by AMDfan

Hi everybody !
I just got my OCZ DDR Booster about 2 hours ago, I haven't try it yet
because i have no time, but later on to night i will and i will let ya know
if it work on ASUS K8N-E Deluxe 250Gb
here's a couple pictures :banana:

http://img83.exs.cx/img83/5020/ocz-ddrbooster002.jpg
http://img83.exs.cx/img83/2834/ocz-ddrbooster019.jpg
http://img83.exs.cx/img83/7645/ocz-ddrbooster021.jpg

---

AMDfan so you put your corsair in slot 1 and 2,ddr boster on slot 3?
can you put the picture of the DDR
i am use corsair twinx 3200xlpro with big heatspreader i worry can i put 2 DDR and 1 ddr boster on this board
:confused:

Why not VDIMM mod it?? Then you can even use 3, if you want :)

now iam think what should i do buy DDR Boster or Vdim mod
if i buy DDR Boster---> not break my mobo guarantee
more safe for my mobo
Vdimm mod---->the cost more cheaper
good experience

anyway what the MAX Vdimm if i use 22K resistor? anyone has try with other
value of resitor?

Quote:

---

Originally Posted by dimasdw

now iam think what should i do buy DDR Boster or Vdim mod
if i buy DDR Boster---> not break my mobo guarantee
more safe for my mobo
Vdimm mod---->the cost more cheaper
good experience

anyway what the MAX Vdimm if i use 22K resistor? anyone has try with other
value of resitor?

---

Your answer is in the thread.....
Is it too difficult to read ?

Quote:

---

Originally Posted by mouzel

The Vdimm mod just adds a certain amount of volt to your Vdimm setting in Bios.
Example: If you use a 10K resistor it adds
0,25V to the bios setting. With a 22K res. it's 0.1 V.

You can use any ground point on the MB.
Make sure it is ground though !!

---

so more lower the resistor value more high the amount of volt add to Vdimmit
it is right?

10k--> 0.25 V
22k--> 0.1 V