most likely, try itQuote:
Originally posted by V I P E R
Can I use this program for 5900XT?
most likely, try itQuote:
Originally posted by V I P E R
Can I use this program for 5900XT?
of course, you can use it for any Nvidia bios.
just this was the first to be used for the 6800 cards.
thats why its exciting to me.
but yes, it should work just fine for your FX card too :D
i already modded my bios with x-bios editor, damn. that was harder.
Would this work on say a Ti4200? Also, do you have any links/names for the raddy version (for 9800pro if possible)
Is there a program like this for 9800 or X800???
And does this vGPU work??? Whats the point of the hardmod then???
every bit of BIOS modding software I get usually comes from either here...
http://www.mvktech.net/news.php
or here.
http://softmod.ocfaq.com/bios.php
other then that, Modding a BIOS is really just trial and error and being willing to risk your card, for a chance to do something more with the card then it's suppose to at stock.
theres not much to learn, it's a hell of alot easier then say "driver modding" but then again, its alot riskier too.
some cards just aren't meant to be flashed, like the 9600 XT.
Flashed period??? Or flashed with these programs???
But you could just flash your card back right???
I just downloaded this and the new 1.3 version, and when loading my original BIOS it says 1.4v GPU. Now with the new 1.3 version it says 1.3v (stock). Also I can't edit my memory timings, just my core voltage, and gpu/mem clocks.
Can someone tell me the stock GPU voltage, is it 1.3v or 1.4v?
I have a PNY 6800 GT btw.
so does this work well?
Im very interested as well. Could somebody mabye test this on an eVGA 6800 Ultra?
Also, what is Ultra core stock voltage?
seems to be ver 1.3 out on that guys site...
http://www.mvktech.net/request.php?556
i have a pny 6800 gt and i know for sure that stock vgpu is 1.3vQuote:
Originally posted by Blind_GI
I just downloaded this and the new 1.3 version, and when loading my original BIOS it says 1.4v GPU. Now with the new 1.3 version it says 1.3v (stock). Also I can't edit my memory timings, just my core voltage, and gpu/mem clocks.
Can someone tell me the stock GPU voltage, is it 1.3v or 1.4v?
I have a PNY 6800 GT btw.
Have you tried changing it?
yep, 1.4v gives me a lot more headroom, but heat becomes an issue so i need to upgrade cooling before i can up my vgpu again.Quote:
Originally posted by EnJoY
Have you tried changing it?
The less i have to solder the more i get to game is my opinion!
the 6800u uses a better heatsink than that of the gt correct? wonder if u could get ahold of 1 of them cristoph...
Quote:
Originally posted by Çhrist0ph
yep, 1.4v gives me a lot more headroom, but heat becomes an issue so i need to upgrade cooling before i can up my vgpu again.
So christ0ph u actually got a higher OC just by changing the volts to 1.4v, but it was unstable because of the heat?
And my temps are at 49c idel, and it never goes above 60c - 62c load. What are ur temps at at stock voltage, and at 1.4v?
This will actually be my first vid card bios flash, so im a little afraid im gonna ruin my BIOS (I did make two back ups though just incase). So I put on nvflash v4.41 and the newly moded BIOS at 1.4v and 400/550 (won't let me change anything else with the new 1.3v version). Can you just tell me if this is the right command... a:\nvflash -p -u -f MODIFIED.rom (I saved the moded bios file as MODIFIED.rom)?
Its 1.3v in 2D Mode.
I suggest you do your tweaking using the 3D Mode clocks while running a game in window mode.
Hey christoph... you verified the boost with a Multimeter?
Anyone knows the measure point for 6800 Non-Ultra Vgpu?
And what's the Thrtl. voltage? It's an option that i can change in Omniextremeedit.
The voltage when it throttles back.
Ok, thks =)Quote:
Originally posted by Crankster
The voltage when it throttles back.
Now i only need the measure point for 6800NU Vgpu, anyone?
nope, but im sure it upped the vgpu. My card won't do a single mhz more over 420 on stock vgpu, after the flash i could do 435+...then it would artifact like mad at the end of 3dmark runs or a few minutes into a game.Quote:
Originally posted by texuspete2k2
Hey christoph... you verified the boost with a Multimeter?
@blind_gi
at stock(420/1100) my temps are ~60c idle, 84c load. To flash, all you need to do is type a:\nvflash modified.rom. It didn't work when i typed -p -u -f, don't know why.
Flash back asap if the heat becomes too much for the card.
and yes, i would love to get ahold of a 6800ultra HSF. too bad they aren't sold by themselves :(
I'm trying this as soon as I overclock my Gainward Golden Sample GT. :) I'll see what it can do stock, and then I'll pump in an extra .1 and see where she goes. ;)
Thanks Christ0ph, gonna try in a bit :)
Hopefully it'll be stable, seeing as im running a full 10c cooler then you at idle and load.