no clue but i didnt do that oneQuote:
Originally posted by LilGator
vdimm 3.3v direct mod? Just like the K8N 3.3v mod ?
VBT mod needed as well?
Printable View
no clue but i didnt do that oneQuote:
Originally posted by LilGator
vdimm 3.3v direct mod? Just like the K8N 3.3v mod ?
VBT mod needed as well?
New bios
rev.2.0.0C
rev.2.0.0
D25 rev.2.0.0 01.08.2004 Cpc On 3.19 Bpl by -=Merlin=-
D25 rev.2.0.0C 01.08.2004 Cpc Off 3.19 Bpl by -=Merlin=-
-Timings Mod T(ras) (D25 rev.2.0.0 01.08.2004 Cpc On 3.19 Bpl by -=Merlin=-)
T(ras) 11 slowly
T(ras) 8 faster
-3.02 bpl auf 3.19 bpl
-Romsip Mod
-Cpu interface 200 Mhz Optimiert Romsip
-Power Management Mod (Suspend to Ram bei 250mhz Absolut kein problemm meher)
-COMMAND PER CLOCK (Cpc) Disable/Enable
All testet
Prme95
FFTmax 4096 // FFtTmin 4096 12st ...ok
3DMark 2001 ...ok
3DMark 2003 ...ok
mfg by -=Merlin=-
Thanks a lot Merlin, the d25 rev2 is the best BIOS I´ve used so far. Keep up the good work! :up:
should i use cpc enabled or disabled?
am using 2x512 hyperX ram.
cpc disabled will hinder poor preformance no?
n/m...:cool:
is there a builtin L12 mod in those bioses? and what about bandwith tweak?
?Quote:
Originally posted by blinky
...and 3.3v to vdimm direct mod
I only see bios for NF7...
... but i needed bios for AN7 heh :(
no, its for rev2s only , dont try it , it will :banana: :banana: :banana: :banana: it up
Here..I can send some more but at this time this was all i had screenis ofQuote:
Originally posted by by -=Merlin=-
someone can send DFI Sandra Bandwith 250,255,260,265,270,275 to me
and which dfi bios
And i messed up the clairity sizeing down so much
I will take another and see if i can beat it
Int bufferd 4084 263 FSB x9
Float bufferd 3753
This was TicTac 131 Bios:banana:
LanpartyB
2x256 OCZ PC3500 EB
2400 XP-Mobile
BB ATI 9800 Pro
Antec TC 550W
test
D25 rev.2.0.0C 01.08.2004 Cpc Off 3.19 Bpl by -=Merlin=-
FSB 250 rev.2.0.0C Cpc Off
FSB 250 SSoft Cpc Off
this bios is very stable, I in long tested and nothing negative determined
cpc is like the command rate i believe... like 1T or 2T, cpc on performs better clock for clock... but cpc off yields higher ram oc.Quote:
Originally posted by JRY
should i use cpc enabled or disabled?
am using 2x512 hyperX ram.
cpc disabled will hinder poor preformance no?
The D2 bios was not stable for me... got occasional reboots surfing the net, DLing, and watching some video :(
Using two sticks of 256mb single sided HyperX BH-5. Ran them at 240, then at 230 and still reboots...
I am back to one of Tictac's d23 bioses...
@r3b0rN
Wow, who's that chick in your avatar??? :slobber:
This is the best BIOS I've tried so far! I couldn't even overclock past 200MHz before without instabilities and stuff. Now I've been up to 235MHz 11-2-2-2 with CPU Interface enabled! :banana:
I'm using the 2D BIOS in the original post. Does this have CPC enabled or disabled?
Merlin's download links are broken?
I cant get it too~
http://forums.pcper.com/showthread.php?t=338953Quote:
Originally posted by uwackme
Merlin's download links are broken?
Hi
New Bios
rev 2.0.1C
D25 rev.2.0.1C 03.08.2004 Cpc Off 3.19 Bpl by -=Merlin=-
-Romsip Mod 1-31
-Optimirung
-CPU Disconnect Function as recomended by nVidia tech
-Alpha Timing : 2-3-3-3-3-3-4
-T(rc) : 9
-T(rfc) : 12
-Dimm Driving Strength : 6
-Dimm Slew Rate : 7
very stable, very god
by -=Merlin=-
WoW Merlin!! keep up the good work m8!
let me know if u need any gunie pigs to test it on :D
btw...would u recommend cpc off?
its better for 1gig kingston?
I cant get access to the bios page... I get DNS error...hmmm
Quote:
Originally posted by uwackme
I cant get access to the bios page... I get DNS error...hmmm
this problem is not well-known me, I tested
How many volts on the RAM?Quote:
Originally posted by seldomsean
Here..I can send some more but at this time this was all i had screenis of
And i messed up the clairity sizeing down so much
I will take another and see if i can beat it
Int bufferd 4084 263 FSB x9
Float bufferd 3753
This was TicTac 131 Bios:banana:
LanpartyB
2x256 OCZ PC3500 EB
2400 XP-Mobile
BB ATI 9800 Pro
Antec TC 550W
Quote:
Originally posted by HaLDoL
How many volts on the RAM?
3.3 Vdimm...
Maybe Abducted or someone could alternate-host the bios's. I'd luv to tes that 2.0.1C cpc-off version, but I cant get to the page... comes up DNS error.
New Bios
rev.2.0.2
rev.2.0.3
D25 rev.2.0.2 06.08.2004 Cpc On 3.19 Bpl by -=Merlin=-
D25 rev.2.0.3 06.08.2004 Cpc On 3.19 Bpl by -=Merlin=-
rev.2.0.2 neu Romsip Mod
rev.2.0.3 optimiert 3DMark