2.8v run DDR600 5-3-4-2.5
http://61.220.123.253/cpg/albums/userpics/10004/7.JPG
http://61.220.123.253/cpg/albums/userpics/10004/8.jpg
Printable View
2.8v run DDR600 5-3-4-2.5
http://61.220.123.253/cpg/albums/userpics/10004/7.JPG
http://61.220.123.253/cpg/albums/userpics/10004/8.jpg
Anyone have any luck with these with Dual Channel on a Skt 939 mobo (preferably an AV8)?
Anyone have this ram with s939 mobo? :D
Which timings at 225Mhz? :confused:
Can somebody with this memory and Intel system confirm is this ram capable of running @ 270 @ 2.5/3/3/6 ?
hmm, just me or is qk4722 mem score a bit low, should be 4400+ at that speed.
i wanna see DDR666
would be nice 3.2EE@250fsb with P4C800-E upclocked 3:4 with ram @ DDR666 hehe
I think on a FX-53 is better :D
256MB TCCD 2.8v can run DDR660 ! :slobber:
http://61.220.123.253/cpg/albums/use...10004/5103.jpg
DDR644 run 3d01
http://61.220.123.253/cpg/albums/use...004/306121.jpg
OMG :slobber:
How many volts? 3.2? ;)
DDR660 at 2.8vQuote:
Originally posted by Juspriss
OMG :slobber:
How many volts? 3.2? ;)
512MB DDR700 at 3v
http://61.220.123.253/cpg/albums/userpics/10004/700.JPG
Great! :slobber: :slobber: :slobber:
Nice job m8 !:banana:
And with the 512 sticks? :confused:
Holy Shnikeys.
Had to save the screenshot of DDR700
:D
Nice work!
Very nice MHz numbers there :toast:
Thanks for the 3DMark data too!
Running with slow timings seems to give quite a hit in performance if compared to 2-2-2-5 timings. Take a look at the 3dmark2001 score and Game Test 3 - Lobby hi and low results (these are the system speed/real world bandwidth indicators).
2577MHz, 8x322, 1:1 3-4-4-8:
Lobby Low = 345.3fps
Lobby Hi = 157.7fps
2394MHz, 9x266, 1:1 2-2-2-5:
Lobby Low = 354.7fps
Lobby Hi = 159.3fps
2528MHz, RAM @281MHz 2-2-2-5, R9800XT:
Lobby Low = 361.0fps
Lobby Hi = 172.2fps
Havent seen you in a while Macci, been busy and with what? Nice showing how bad ras-cas4 is! Even bh5 at 266fsb will blow away any 320+ fsb high latency ram, especially if cpu Mhz is constant!
but how many people have the ram or the volts to do 266fsb 2-2-2-5 .... most poeple can give ram 2.8v looks like brilliant overclocking ram for the masses .... so where are those dual channel benchies !!
dont think its possible dual channel
Anyone w/ BH5/3700EB ram, good A64 mobo and DDR booster or modding skills. :DQuote:
but how many people have the ram or the volts to do 266fsb 2-2-2-5 ....
266 on A64 board ain't that difficult. And it seems that 250ish 2-2-2-5 is enough to match 3-4-4-8 stuff at 320 (when CPU MHz is equal)..
my point exactly. My friend wasnt kidding when he said dont even think of pc4200 ram. My plan was to grab some pc4200 and try to get high 200s or even 300fsb without vmod, he said you might as well run bh5 at 220-230fsb at 2.9v and get equal or better performance
sorry not acually ddr700:(Quote:
Originally posted by qk4722
DDR660 at 2.8v
512MB DDR700 at 3v
http://61.220.123.253/cpg/albums/userpics/10004/700.JPG
you have A64, and are using 4 multipier, and the lowest ram devisor for a64 is 5 so your are running at 350mhz@4:5=280mhz, still awsome though.....
test bandwidth at 280mhz w/ 5 multi @1:1, and at 350mhz w/ 4multi @1:1, and results should be very similar....
BH-5 Forever
http://pageperso.aol.fr/misteroadster/276.JPG:rolleyes:
http://pageperso.aol.fr/misteroadster/3DM273.JPGQuote:
Originally posted by althes
dont think its possible dual channel
So,what ?Quote:
Originally posted by jess1313
sorry not acually ddr700:(
you have A64, and are using 4 multipier, and the lowest ram devisor for a64 is 5 so your are running at 350mhz@4:5=280mhz, still awsome though.....
test bandwidth at 280mhz w/ 5 multi @1:1, and at 350mhz w/ 4multi @1:1, and results should be very similar....
A-data TCCD 512MB@DDR610 1:1 :banana:
http://61.220.123.253/cpg/albums/use...610%20Dual.JPG
johnnyliu3377
Exatly ,i do same with my ADATA PC4000 at x4 multi 2.6v 3/4/4/10 :Quote:
Originally posted by jess1313
sorry not acually ddr700:(
you have A64, and are using 4 multipier, and the lowest ram devisor for a64 is 5 so your are running at 350mhz@4:5=280mhz, still awsome though.....
test bandwidth at 280mhz w/ 5 multi @1:1, and at 350mhz w/ 4multi @1:1, and results should be very similar....
ADATA PC4000 @355Mhz Coef x4
Quote:
Originally posted by overcrash86
Exatly ,i do same with my ADATA PC4000 at x4 multi 2.6v 3/4/4/10 :
ADATA PC4000 @355Mhz Coef x4
good god!! thats a crazy oc.. , ive tested alot of pc4000. the fastest i ever got was 310 from 1 256 stick. are these newer vitesta employing the new samsung tccd, or are they hynix.??
ADATA Vitesta DDR500Quote:
Originally posted by flapperhead
good god!! thats a crazy oc.. , ive tested alot of pc4000. the fastest i ever got was 310 from 1 256 stick. are these newer vitesta employing the new samsung tccd, or are they hynix.??