vbt mod ?
Printable View
vbt mod ?
I think he means the vagp/chipset mod
do you happen to have a link to this mod?
1/2 vddr
pin 9 or 10 of the LM324 + a ground for me, it works
my P4C800 has full modded
20k trimmer Žž‚Å0.04Vã¸A1k trimmerŽž‚Å0.4V)
http://membres.lycos.fr/cpulloverclo...19020827.1.jpg
What exactly does this mod do? Also what is a safe 24/7 agp voltage. (It is the voltage that you can adjust in the bios up to 1.8v right? Is there a site or thread that has info on all the mods for the p4c800 board?
so you been able to go past 260mhz 2-2-2-6 at 1:1 on P4C800 with this ?Quote:
Originally posted by cpulloverclock
1/2 vddr
pin 9 or 10 of the LM324 + a ground for me, it works
my P4C800 has full modded
20k trimmer Žž‚Å0.04Vã¸A1k trimmerŽž‚Å0.4V)
yesQuote:
Originally posted by eva2000
so you been able to go past 260mhz 2-2-2-6 at 1:1 on P4C800 with this ?
I also have the vcore mod
I can start with 1.9v with my prescott
a 50K trimmer
http://219.113.251.125/c-board/file/..._Vcore-mod.jpg
I've got the vdimm, vbt, vagp (vtt), droop, vcore mod
vagp (high) and vtt, help me a lot with my is7e and ic7Quote:
Originally posted by eva2000
so you been able to go past 260mhz 2-2-2-6 at 1:1 on P4C800 with this ?
32M
it's impossible with a low vagp
what is this mod???do you have a link for see better??Quote:
Originally posted by cpulloverclock
1/2 vddr
pin 9 or 10 of the LM324 + a ground for me, it works
my P4C800 has full modded
20k trimmer Žž‚Å0.04Vã¸A1k trimmerŽž‚Å0.4V)
http://membres.lycos.fr/cpulloverclo...19020827.1.jpg
thnaks:)
so how high does vAGP need to be to consistently get over 260mhz 2-2-2-6 ?
From the looks of your testing and other's comments...no less than 1.8v.
what is a safe 24/7 voltage for the vagp?
2.1-2.15v for meQuote:
Originally posted by neyoung
what is a safe 24/7 voltage for the vagp?
did i miss it or what do you set the ram voltage at in the bios with the booster?
p4c800e
Vagp? So is that actually VAGP or does it in fact adjust vtt or something?
it sounds like what a bunch of us need is a detailed description of how to do the mod/what it does, and a little better picture.
where can we find this vbt mod?
post a link pls
Hi!
I used the settings you mentioned before in your thread and could reach 265 1:1 on P4C800E. No mods except vdroop and vdimm. vagp was set to 1.8V and Vdimm was about 3.45V.
I was able to boot into windows and do a 32M
The difficult thing is to get a stable enough vdimm. A higher Vcore than 1.55V leads into a crash while calculating.
Also more Vdimm makes it worse.
I too have a p4c800-e dlx and cant get over 290 1:1 2.5 4-4-8 for most benching..ie..3dmark.
pcmark did run a little faster 293fsb
http://dereliction.org/images/cpuzmem.jpg
I cant get any higher no mater what devider or voltage increase.
I guess its a nb issue.
I shouldnt complain since its cheap ram and I havent seen anyone else running these timings/speed?Quote:
Originally Posted by intakeem