:toast: excellent job tictac and Codered :D Hope some DFI users to contribute for those values.Quote:
Originally posted by tictac
hope someone can help me find
- Data Scavenged
- Super Bypass
- Dimm Strenght & slew rate
register next :D
Printable View
:toast: excellent job tictac and Codered :D Hope some DFI users to contribute for those values.Quote:
Originally posted by tictac
hope someone can help me find
- Data Scavenged
- Super Bypass
- Dimm Strenght & slew rate
register next :D
TicTac / CodeRed
with version 25b when i set autoprecharge to disable it shows up enabled in wpcredit, and vice versa. ive restarted and it still shows up the oppsite of what i choose
that was a minor mistake in the initial decoding.Quote:
Originally posted by existz
TicTac / CodeRed
with version 25b when i set autoprecharge to disable it shows up enabled in wpcredit, and vice versa. ive restarted and it still shows up the oppsite of what i choose
offset 0x86 = 0x0D disabled, and 0x0F for enabled
ya i hope more DFI user can contribute to us...Quote:
Originally posted by enduracell
:toast: excellent job tictac and Codered :D Hope some DFI users to contribute for those values.
:toast:
went from 23532240 with 15,232 3dmark points and 3468/3258 with sandra to 0233004 with 15,300 3dmark points and 3502/3294 sandra :) managed to get my bandwidth back up without loosing 3dmark points
http://server6.uploadit.org/files/ex...ght3dmark2.JPG
wfy do u disable auto precharge?
;)
0D = Disable
0F = Enable
***edit*** ran benchies both enabled and disabled and i get better scores both with 3dmark and sandra disabled
that was a minor mistake in my Pic before
Auto Precharge
--------------------
offset 0x86 = 0x0D disabled, and 0x0F for enabled
;)
ok so for auto precharge 0F=enable and 0D=disable correct?
yes it is ;)
ok i get FSB register... but i dont know how to encode/decode the data :(
Nvidia System utility / nForce2 Clockgen / etc....Quote:
Originally posted by tictac
ok i get FSB register... but i dont know how to encode/decode the data :(
writing to this address but when we change FSB in bios.. they dont changed data here..... :stick:
maybe this is the reason why 3d mark doesn't read correct FSB after we use clockgen/nvsu/nf7vcore to publish our 3D mark score
there probably other address been used by the bios :-/
hehehe...
EXT P2P Discard Time...
thanx to Gray Wolf
:toast:
Is it the same for Sil3114 as Sil3112?
yes it is the same for all nforce2 southbridge ;)Quote:
Originally posted by uwackme
Is it the same for Sil3114 as Sil3112?
not related to Sil chip
it is located on PCI bridge :)
Ok thanx to Showy @ DFI Street.com
Dimm Drive Strength
:toast:Code:Bus: 0 Device: 0 Function: 4 Mem Controller
Dimm 1 Drive Strength, Registers 7D, 81 -8bit
Dimm 2 Drive Strength, Registers 67, 73 -8bit
Dimm 3 Drive Strength, Registers 65, 71 -8bit
Drive Strength Settings
Bios Data
1 11
2 22
3 33
4 44
5 55
6 66
7 77
8 88
9 99
10 AA
11 BB
12 CC
13 DD
14 EE
15 FF
tictac,
Looks like I'll have to make another release soon ;)
thanx ;)
Tictac...I have allways used your bios versions because i
get better results 2-15..DFI LP-B anyhow thanks to you
and CodeRed for making this available for all of us..Also
Im on a LanpartyB 2400 Mobile and if you need any
Specific testing ran just let me know as i would be
all to happy to help out...My max FSB 268 right now
but only stable enough to get screenshots thats all
but i can benchmark up to 265
-Sean
Another Register
Dimm Slew Rate
thanx to Showy again ;) :toast:
More Register ;)
Data Scavenged & Super By Pass
thanx to showy again
Code:Data Scavenged Rate
Bus: 0 Device: 0 Function: 4 Mem Controller
Fast: Register 96 = 43 8-Bit
Normal: Register 96 = 44 8-Bit
Super By Pass
Bus:0 Device: 0 Function: 4 Mem Controller
Enable: Register 91 = 49, 8-bit
Disable: Register 91 = 48, 8-bit
Dimm Drive Strength
Bus: 0 Device: 0 Function: 4 Mem Controller
Dimm 1 Drive Strength, Registers 7D, 81 8-bit
Dimm 2 Drive Strength, Registers 67, 73 8-bit
Dimm 3 Drive Strength, Registers 65, 71 8-bit
Slew Rate
Bus: 0 Device: 0 Function: 4 Mem Controller
Dimm 1 Slew Rate, Register 7C 8-bit
Dimm 2 Slew Rate, Register 66 8-bit
Dimm 3 Slew Rate, Register 64 8-bit
Strength And Rate Settings
Bios Data
1 11
2 22
3 33
4 44
5 55
6 66
7 77
8 88
9 99
10 AA
11 BB
12 CC
13 DD
14 EE
15 FF
sorry got some problem with Data Scavenged & super by pass register :(
In the next release, can you guys add a button to "save/set" the settings(like wpcrset) so theyre permanent on every reboot?
That would make this program even better imho :D
I have gained 430 points so far with some of these tweaks because my bios doesnt allow any manipulation(Shuttle SFF) I actually think this is faster than my DFI Lanparty clock for clock, only difference is I cant clock @ 2.8ghz with a 200w PSU hehe :(
* cough *Quote:
Originally posted by WildKard
In the next release, can you guys add a button to "save/set" the settings(like wpcrset) so theyre permanent on every reboot?
That would make this program even better imho :D
I have gained 430 points so far with some of these tweaks because my bios doesnt allow any manipulation(Shuttle SFF) I actually think this is faster than my DFI Lanparty clock for clock, only difference is I cant clock @ 2.8ghz with a 200w PSU hehe :(
File menu
Hi all!!!
I'm Italian and i'm working on my AN7.....
Someshoot:
SuperP 1Mb Amd 2400/2470 Contest:
http://www.hwtweakers.net/files/foru...p__2465mhz.jpg
http://www.hwtweakers.net/files/foru...a__2465mhz.jpg
http://www.hwtweakers.net/files/foru...s__2465mhz.jpg
This is my best timings solution it was stable and you can see bandwith boost!!!
Just another one shoot (:shrug: i have only liquid cooling..)
http://www.hwtweakers.net/files/foru..._superp_34_sec
Cya All!!!